lrftubes_doc/lrftubes.bib

371 lines
23 KiB
BibTeX
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

@book{swift_thermoacoustics:_2003,
location = {Melville, {NY}, {USA}},
title = {Thermoacoustics: A unifying perspective for some engines and refrigerators},
shorttitle = {Thermoacoustics},
pagetotal = {315},
publisher = {Acoustical Society of America},
author = {Swift, G. W.},
date = {2003},
file = {Swift - 2003 - Thermoacoustics A unifying perspective for some e.pdf:/home/anne/.literature/storage/TX4X2FEP/Swift - 2003 - Thermoacoustics A unifying perspective for some e.pdf:application/pdf;Swift en Garrett - 2003 - Thermoacoustics A unifying perspective for some e.pdf:/home/anne/.literature/storage/6RZNJADB/Swift en Garrett - 2003 - Thermoacoustics A unifying perspective for some e.pdf:application/pdf}
}
@thesis{beltman_viscothermal_1998,
title = {Viscothermal Wave Propagation Including Acousto-Elastic Interaction},
type = {phdthesis},
author = {Beltman, W. M},
date = {1998},
keywords = {book available},
file = {Beltman - 1998 - Viscothermal wave propagation including acousto-el.pdf:/home/anne/.literature/storage/GI8XS8GK/Beltman - 1998 - Viscothermal wave propagation including acousto-el.pdf:application/pdf}
}
@article{beltman_viscothermal_1999,
title = {Viscothermal Wave Propagation Including Acousto-Elastic Interaction, Part I: Theory},
volume = {227},
issn = {0022-460X},
doi = {06/jsvi.1999.2355},
shorttitle = {{VISCOTHERMAL} {WAVE} {PROPAGATION} {INCLUDING} {ACOUSTO}-{ELASTIC} {INTERACTION}, {PART} I},
abstract = {This research deals with pressure waves in a gas trapped in thin layers or narrow tubes. In these cases viscous and thermal effects can have a significant effect on the propagation of waves. This so-called viscothermal wave propagation is governed by a number of dimensionless parameters. The two most important parameters are the shear wave number and the reduced frequency. These parameters were used to put into perspective the models that were presented in the literature. The analysis shows that the complete parameter range is covered by three classes of models: the standard wave equation model, the low reduced frequency model and the full linearized Navier-Stokes model. For the majority of practical situations, the low reduced frequency model is sufficient and the most efficient to describe viscothermal wave propagation. The full linearized Navier-Stokes model should only be used under extreme conditions.},
pages = {555--586},
number = {3},
journaltitle = {Journal of Sound and Vibration},
author = {Beltman, W. M.},
urldate = {2011-07-20},
date = {1999},
keywords = {Printed},
file = {BELTMAN - 1999 - VISCOTHERMAL WAVE PROPAGATION INCLUDING ACOUSTO-EL.pdf:/home/anne/.literature/storage/VUEH48TH/BELTMAN - 1999 - VISCOTHERMAL WAVE PROPAGATION INCLUDING ACOUSTO-EL.pdf:application/pdf;ScienceDirect Snapshot:/home/anne/.literature/storage/7RZVXTAA/S0022460X99923556.html:text/html}
}
@article{swift_thermoacoustic_1988,
title = {Thermoacoustic Engines},
volume = {84},
issn = {00014966},
doi = {10.1121/1.396617},
pages = {1145--1180},
number = {4},
journaltitle = {The Journal of the Acoustical Society of America},
shortjournal = {J. Acoust. Soc. Am.},
author = {Swift, G. W.},
urldate = {2011-07-20},
date = {1988},
keywords = {Printed},
file = {Swift - 1988 - Thermoacoustic engines.pdf:/home/anne/.literature/storage/NGUESBBB/Swift - 1988 - Thermoacoustic engines.pdf:application/pdf;Thermoacoustic engines | Browse - Journal of the Acoustical Society of America:/home/anne/.literature/storage/NSHR2HI3/p1145_s1.html:text/html}
}
@article{rott_damped_1969,
title = {Damped and thermally driven acoustic oscillations in wide and narrow tubes},
volume = {20},
issn = {0044-2275},
doi = {10.1007/BF01595562},
pages = {230--243},
number = {2},
journaltitle = {Zeitschrift für angewandte Mathematik und Physik},
shortjournal = {Journal of Applied Mathematics and Physics ({ZAMP})},
author = {Rott, Nikolaus},
date = {1969-03},
file = {Rott - 1969 - Damped and thermally driven acoustic oscillations .pdf:/home/anne/.literature/storage/8FNJIHA2/Rott - 1969 - Damped and thermally driven acoustic oscillations .pdf:application/pdf;SpringerLink - Zeitschrift für Angewandte Mathematik und Physik (ZAMP), Volume 20, Number 2:/home/anne/.literature/storage/QNIQ6QWV/u22268322515314q.html:text/html}
}
@article{kampinga_performance_2010,
title = {Performance of Several Viscothermal Acoustic Finite Elements},
volume = {96},
doi = {10.3813/AAA.918262},
abstract = {Viscothermal acoustics can be described by the linearized Navier Stokes equations. Besides inertia and compressibility, these equations take the heat conductivity and the viscosity of the medium (air) into account. These 'viscothermal' effects are significant in, for example, miniature acoustic transducers and {MEMS} devices. A finite element for viscothermal acoustics, which can be used to model such devices, is presented. The particular set of equations used in the model of viscothermal acoustics leads to a complex symmetric finite element system matrix. Several different {FEM} discretizations are studied on a 2D thin gap problem. These discretizations are known, in the context of the Stokes equation, as the Taylor Hood quadrilateral and triangle elements, the Crouzeix Raviart element and the {MINI} element. All elements are implemented in the {FEM} software {COMSOL}. The elements with quadratic velocity and temperature shape functions show the best orders of convergence.},
pages = {115--124},
number = {1},
journaltitle = {Acta Acustica united with Acustica},
shortjournal = {Acta Acustica united with Acustica},
author = {Kampinga, W.R. and Wijnant, Y.H. and de Boer, A.},
date = {2010},
file = {Kampinga et al. - 2010 - Performance of Several Viscothermal Acoustic Finit.pdf:/home/anne/.literature/storage/HJNPKD8V/Kampinga et al. - 2010 - Performance of Several Viscothermal Acoustic Finit.pdf:application/pdf}
}
@article{tijdeman_propagation_1975,
title = {On the propagation of sound waves in cylindrical tubes},
volume = {39},
issn = {0022-460X},
doi = {10.1016/S0022-460X(75)80206-9},
abstract = {It is shown that the two main parameters governing the propagation of sound waves in gases contained in rigid cylindrical tubes, are the shear wave number, s = R ρ s ω / μ , and the reduced frequency, k=ωR/a0. It appears possible to rewrite the most significant analytical solutions for the propagation constant, Γ, as given in the literature, as simple expressions in terms of these two parameters. With the aid of these expressions the various solutions are put in perspective and their ranges of applicability are indicated.
It is demonstrated that most of the analytical solutions are dependent only on the shear wave number, s, and that they are covered completely by the solution obtained for the first time by Zwikker and Kosten (1949).
The full solution of the problem has been obtained by Kirchhoff (1868) in the form of a complicated, complex transcendental equation. In the present paper this equation is rewritten in terms of the mentioned basic parameters and brought in the attractive form F\<, s, k\>=0, which is solved numerically by using the Newton-Raphson procedure. As first estimate in this procedure the value ofaccording to the solution of Zwikker and Kosten is taken. Results are presented for a wide range of s and k values.},
pages = {1--33},
number = {1},
journaltitle = {Journal of Sound and Vibration},
author = {Tijdeman, H.},
urldate = {2012-01-05},
date = {1975-03-08},
file = {ScienceDirect Snapshot:/home/anne/.literature/storage/9B2T7ZM8/S0022460X75802069.html:text/html;Tijdeman - 1975 - On the propagation of sound waves in cylindrical t.pdf:/home/anne/.literature/storage/368PZ6AN/Tijdeman - 1975 - On the propagation of sound waves in cylindrical t.pdf:application/pdf}
}
@article{kampinga_efficient_2011,
title = {An Efficient Finite Element Model for Viscothermal Acoustics},
volume = {97},
doi = {10.3813/AAA.918442},
abstract = {Standard isentropic acoustic models do not include the dissipative effects of viscous friction and heat conduction. These viscothermal effects can be important, for example in models of small acoustic transducers. Viscothermal acoustics can be modeled in arbitrary geometries with models that contain four or five coupled fields. Therefore, these fully coupled models are computationally costly. On the other hand, efficient approximate viscothermal acoustic models exist, but these are only applicable to certain simplified geometries. A new approximate model is presented which fills the gap between these two extremes. This new model can be used for arbitrary geometries and has a computational efficiency which is higher than the full model and lower than the models with geometrical constraints. The new model is derived and demonstrated on several problems, including acoustic-structure interaction problems.},
pages = {618--631},
number = {4},
journaltitle = {Acta Acustica united with Acustica},
author = {Kampinga, W.R. and Wijnant, Y.H. and de Boer, A.},
date = {2011},
file = {ingentaconnect An Efficient Finite Element Model for Viscothermal Acoustics:/home/anne/.literature/storage/68KJ2IVT/art00009.html:text/html;Kampinga et al. - 2011 - An Efficient Finite Element Model for Viscothermal.pdf:/home/anne/.literature/storage/QRGF9MR6/Kampinga et al. - 2011 - An Efficient Finite Element Model for Viscothermal.pdf:application/pdf}
}
@book{bird_transport_2007,
location = {New York, {NY}, {USA}},
edition = {2nd},
title = {Transport phenomena},
isbn = {978-0-470-11539-8},
series = {Wiley International edition},
publisher = {J. Wiley},
author = {Bird, R.B. and Stewart, W.E. and Lightfoot, E.N.},
date = {2007}
}
@article{bossart_hybrid_2003,
title = {Hybrid numerical and analytical solutions for acoustic boundary problems in thermo-viscous fluids},
volume = {263},
issn = {0022-460X},
url = {http://www.sciencedirect.com/science/article/pii/S0022460X02010982},
doi = {10.1016/S0022-460X(02)01098-2},
abstract = {The present work aims at contributing to the investigation of methods to solve some classes of problems of acoustic propagation in thermo-viscous fluids, in unbounded or bounded media. The focus here is on thermal and vortical diffusion at the boundaries, which have to be considered for an accurate description of the acoustic field in small fluid-filled cavities and ducts. Existing boundary element or finite element acoustic software does not include these phenomena, as they are not compatible with the basic equations involved. A methodology is given to solve such problems when using this software, introducing a hybrid method which combines both numerical solutions and analytical solutions (for the fields inside the boundary layers). A detailed application is presented to validate the process using a boundary elements method.},
pages = {69--84},
number = {1},
journaltitle = {Journal of Sound and Vibration},
author = {Bossart, R. and Joly, N. and Bruneau, M.},
urldate = {2012-03-08},
date = {2003-05-22},
file = {Bossart et al. - 2003 - Hybrid numerical and analytical solutions for acou.pdf:/home/anne/.literature/storage/5HTQ7MAA/Bossart et al. - 2003 - Hybrid numerical and analytical solutions for acou.pdf:application/pdf;ScienceDirect Snapshot:/home/anne/.literature/storage/VFCQVD9W/Bossart et al. - 2003 - Hybrid numerical and analytical solutions for acou.html:text/html}
}
@article{christensen_modeling_2011,
title = {Modeling the Effects of Viscosity and Thermal Conduction on Acoustic Propagation in Rigid Tubes with Various Cross-Sectional Shapes},
volume = {97},
doi = {10.3813/AAA.918398},
abstract = {When modeling acoustics with viscothermal effects included, typically of importance for narrow tubes and slits, one can often use the so-called low reduced frequency model. With this model a characteristic length is assumed for which the sound pressure is constant. For example for a circular cylindrical tube the characteristic length is the radius. A triangular cross-section does not have a characteristic length, but as will be shown in this paper the model can in fact be used as long as 1) the cross-sectional pressure is constant and 2) a characteristic impedance and propagation wavenumber can be established for the geometry. These parameters can be found for a tube with a triangular cross-section and an implementation of the low reduced frequency which can handle tubes with both circular, rectangular triangular cross-sections has been made in {COMSOL} Multiphysics. For the circular and the rectangular tube results found using this implementation have been compared to results from an analytical model, a so-called full Navier-Stokes implementation in {COMSOL} Multiphysics and the commercial package {FFT} {ACTRAN} which also uses the low reduced frequency model. The triangular tube implementation has been compared to the analytical case as well as the full Navier-Stokes implementation.},
pages = {193--201},
number = {2},
journaltitle = {Acta Acustica united with Acustica},
author = {Christensen, René},
date = {2011},
file = {Christensen - 2011 - Modeling the Effects of Viscosity and Thermal Cond.pdf:/home/anne/.literature/storage/I7TPZTVK/Christensen - 2011 - Modeling the Effects of Viscosity and Thermal Cond.pdf:application/pdf;ingentaconnect Modeling the Effects of Viscosity and Thermal Conduction on Acous...:/home/anne/.literature/storage/5KPM7UNC/art00002.html:text/html}
}
@thesis{nijhof_viscothermal_2010,
location = {E},
title = {Viscothermal wave propagation},
institution = {University of Twente},
type = {phdthesis},
author = {Nijhof, M. J. J.},
date = {2010},
file = {Nijhof - 2010 - Viscothermal wave propagation.pdf:/home/anne/.literature/storage/F4WV3C2J/Nijhof - 2010 - Viscothermal wave propagation.pdf:application/pdf}
}
@book{blackstock_fundamentals_2000,
location = {Hoboken, {NJ}, {USA}},
title = {Fundamentals of physical acoustics},
pagetotal = {541},
publisher = {John Wiley \& Sons},
author = {Blackstock, D.T.},
date = {2000}
}
@thesis{kampinga_viscothermal_2010,
location = {Enschede, The Netherlands},
title = {Viscothermal acoustics using finite elements: analysis tools for engineers},
institution = {University of Twente},
type = {phdthesis},
author = {Kampinga, W.R.},
date = {2010},
file = {Kampinga - 2010 - Viscothermal acoustics using finite elements anal.pdf:/home/anne/.literature/storage/E596NW5B/Kampinga - 2010 - Viscothermal acoustics using finite elements anal.pdf:application/pdf}
}
@misc{ward_deltaec_2017,
title = {{DeltaEC} Users Guide version 6.4b2.7},
url = {www.lanl.gov/thermoacoustics},
author = {Ward, W. C. and Clark, J. P. and Swift, G. W.},
urldate = {2018-01-22},
date = {2017-12-04},
file = {Ward e.a. - 2017 - DeltaEC Users Guide version 6.4b2.7.pdf:/home/anne/.literature/storage/MQKGHJ9I/Ward e.a. - 2017 - DeltaEC Users Guide version 6.4b2.7.pdf:application/pdf}
}
@article{licht_variation_1944,
title = {The Variation of the Viscosity of Gases and Vapors with Temperature.},
volume = {48},
issn = {0092-7325},
doi = {10.1021/j150433a004},
pages = {23--47},
number = {1},
journaltitle = {The Journal of Physical Chemistry},
shortjournal = {J. Phys. Chem.},
author = {Licht, William and Stechert, Dietrich G.},
urldate = {2015-01-08},
date = {1944},
file = {ACS Full Text Snapshot:/home/anne/.literature/storage/4JAIZ6VC/j150433a004.html:text/html;Licht and Stechert - 1944 - The Variation of the Viscosity of Gases and Vapors.pdf:/home/anne/.literature/storage/MKPFZ6SN/Licht and Stechert - 1944 - The Variation of the Viscosity of Gases and Vapors.pdf:application/pdf}
}
@thesis{van_der_eerden_noise_2000,
location = {Enschede, The Netherlands},
title = {Noise reduction with coupled prismatic tubes},
abstract = {The present investigation focuses on an accurate description of sound absorption. Within this research a new technique to create sound absorption for a predefined frequency band has been developed. Additionally, a simple and efficient numerical model for conventional sound absorbing materials, such as glass wool or foams, has been formulated. It is also demonstrated that the newly gained insights are useful in applications not directly related to sound absorption.},
institution = {University of Twente},
type = {phdthesis},
author = {van der Eerden, F.J.M.},
date = {2000-11},
file = {Eerden - 2000 - Noise reduction with coupled prismatic tubes.pdf:/home/anne/.literature/storage/JTAD25WQ/Eerden - 2000 - Noise reduction with coupled prismatic tubes.pdf:application/pdf}
}
@article{rienstra_introduction_2015,
title = {An introduction to acoustics},
volume = {18},
pages = {296},
journaltitle = {Eindhoven University of Technology},
author = {Rienstra, Sjoerd W and Hirschberg, Avraham},
date = {2015},
file = {Rienstra and Hirschberg - 2015 - An introduction to acoustics.pdf:/home/anne/.literature/storage/7E6VWDZ4/Rienstra and Hirschberg - 2015 - An introduction to acoustics.pdf:application/pdf}
}
@thesis{de_jong_numerical_2015,
location = {Enschede},
title = {Numerical modeling of thermoacoustic systems},
rights = {All rights reserved},
url = {http://doc.utwente.nl/96275/},
institution = {Universiteit Twente},
type = {phdthesis},
author = {De Jong, J.A.},
date = {2015},
keywords = {my},
file = {Jong - 2015 - Numerical modeling of thermoacoustic systems.pdf:/home/anne/.literature/storage/GQTWDG7B/Jong - 2015 - Numerical modeling of thermoacoustic systems.pdf:application/pdf}
}
@article{aarts_approximation_2003,
title = {Approximation of the Struve function H1 occurring in impedance calculations},
volume = {113},
issn = {0001-4966},
url = {http://asa.scitation.org/doi/10.1121/1.1564019},
doi = {10.1121/1.1564019},
pages = {2635--2637},
number = {5},
journaltitle = {The Journal of the Acoustical Society of America},
author = {Aarts, Ronald M. and Janssen, Augustus J. E. M.},
urldate = {2017-10-21},
date = {2003-05},
langid = {english},
file = {Aarts and Janssen - 2003 - Approximation of the Struve function H1 occurring .pdf:/home/anne/.literature/storage/LUM2PYYD/Aarts and Janssen - 2003 - Approximation of the Struve function H1 occurring .pdf:application/pdf}
}
@thesis{christensen_acoustic_2010,
title = {Acoustic Modeling of Hearing Aid Components},
institution = {Syddansk Universitet},
type = {phdthesis},
author = {Christensen, René},
date = {2010},
file = {Christensen - 2010 - Acoustic Modeling of Hearing Aid Components.pdf:/home/anne/.literature/storage/ABISVJM8/Christensen - 2010 - Acoustic Modeling of Hearing Aid Components.pdf:application/pdf}
}
@article{karal_analogous_1953,
title = {The analogous acoustical impedance for discontinuities and constrictions of circular cross section},
volume = {25},
pages = {327--334},
number = {2},
journaltitle = {The Journal of the Acoustical Society of America},
author = {Karal, {FC}},
date = {1953},
file = {Karal - 1953 - The analogous acoustical impedance for discontinui.pdf:/home/anne/.literature/storage/ZSJSCHMS/Karal - 1953 - The analogous acoustical impedance for discontinui.pdf:application/pdf}
}
@article{benade_propagation_1968,
title = {On the propagation of sound waves in a cylindrical conduit},
volume = {44},
pages = {616--623},
number = {2},
journaltitle = {The Journal of the Acoustical Society of America},
author = {Benade, Arthur H},
date = {1968},
file = {Benade - 1968 - On the propagation of sound waves in a cylindrical.pdf:/home/anne/.literature/storage/E4GR6AXF/Benade - 1968 - On the propagation of sound waves in a cylindrical.pdf:application/pdf}
}
@book{morse_theoretical_1968,
title = {Theoretical acoustics},
publisher = {{McGraw}-Hill International Edition},
author = {Morse, Philip {McCord} and Ingard, K Uno},
date = {1968},
file = {Morse en Ingard - 1968 - Theoretical acoustics.pdf:/home/anne/.literature/storage/UD52GPB6/Morse en Ingard - 1968 - Theoretical acoustics.pdf:application/pdf}
}
@article{tsilingiris_thermophysical_2008,
title = {Thermophysical and transport properties of humid air at temperature range between 0 and 100 C},
volume = {49},
pages = {1098--1110},
number = {5},
journaltitle = {Energy Conversion and Management},
author = {Tsilingiris, {PT}},
date = {2008},
file = {Tsilingiris - 2008 - Thermophysical and transport properties of humid a.pdf:/home/anne/.literature/storage/65SE4BDX/Tsilingiris - 2008 - Thermophysical and transport properties of humid a.pdf:application/pdf}
}
@article{cramer_variation_1993,
title = {The variation of the specific heat ratio and the speed of sound in air with temperature, pressure, humidity, and {CO}2 concentration},
volume = {93},
pages = {2510--2516},
number = {5},
journaltitle = {The Journal of the Acoustical Society of America},
author = {Cramer, Owen},
date = {1993},
file = {Cramer - 1993 - The variation of the specific heat ratio and the s.pdf:/home/anne/.literature/storage/ZCGL7MPK/Cramer - 1993 - The variation of the specific heat ratio and the s.pdf:application/pdf}
}
@book{young_roarks_2002,
title = {Roark's formulas for stress and strain},
volume = {7},
publisher = {{McGraw}-Hill New York},
author = {Young, Warren Clarence and Budynas, Richard Gordon},
date = {2002},
file = {Young en Budynas - 2002 - Roark's formulas for stress and strain.pdf:/home/anne/.literature/storage/5VJDJLYP/Young en Budynas - 2002 - Roark's formulas for stress and strain.pdf:application/pdf}
}
@inproceedings{kuipers_investigations_2017,
location = {Kiel, Germany},
title = {Investigations on acoustic radiation by hearing aid tubes},
eventtitle = {{DAGA} 2017},
author = {Kuipers, Erwin Reinder and Westhausen, Nils},
date = {2017}
}
@article{welch_use_1967,
title = {The use of fast Fourier transform for the estimation of power spectra: a method based on time averaging over short, modified periodograms},
volume = {15},
pages = {70--73},
number = {2},
journaltitle = {{IEEE} Transactions on audio and electroacoustics},
author = {Welch, Peter},
date = {1967}
}
@article{kino_investigation_2009,
title = {Investigation of non-acoustical parameters of compressed melamine foam materials},
volume = {70},
issn = {0003682X},
url = {https://linkinghub.elsevier.com/retrieve/pii/S0003682X08001497},
doi = {10.1016/j.apacoust.2008.07.002},
abstract = {A series of careful non-acoustical parameters measurements using 5 Illtec melamine foam and 10 Basotect {TG} melamine foam samples have been made. Flow resistivity, tortuosity, porosity, viscous characteristic length and thermal characteristic length of two types of compressed melamine foam materials with different foam magnifications have been investigated. It has been found that a relationship between the flow resistivity, fibre equivalent diameter and bulk density exists for each of the compressed melamine foam materials.},
pages = {595--604},
number = {4},
journaltitle = {Applied Acoustics},
shortjournal = {Applied Acoustics},
author = {Kino, Naoki and Ueno, Takayasu and Suzuki, Yasuhiro and Makino, Hiroshi},
urldate = {2019-11-28},
date = {2009-04},
langid = {english},
file = {Kino et al. - 2009 - Investigation of non-acoustical parameters of comp.pdf:/home/anne/.literature/storage/I9P5SZAE/Kino et al. - 2009 - Investigation of non-acoustical parameters of comp.pdf:application/pdf}
}
@book{zwikker_sound_1949,
title = {Sound Absorbing Materials},
url = {https://books.google.com/books?id=ezUOnQEACAAJ},
publisher = {Elsevier Publishing Company},
author = {Zwikker, C. and Kosten, C.W.},
date = {1949},
lccn = {50006127}
}