lyx_mirror/src/insets/insetcommandparams.C

474 lines
12 KiB
C++
Raw Normal View History

/**
* \file insetcommandparams.C
* This file is part of LyX, the document processor.
* Licence details can be found in the file COPYING.
*
* \author Angus Leeming
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
* \author Georg Baum
*
* Full author contact details are available in file CREDITS.
*/
#include <config.h>
#include "insetcommandparams.h"
#include "debug.h"
#include "gettext.h"
#include "lyxlex.h"
#include "support/ExceptionMessage.h"
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
#include "support/lstrings.h"
#include <boost/assert.hpp>
namespace lyx {
using support::findToken;
using std::string;
using std::endl;
using std::ostream;
using support::ExceptionMessage;
using support::WarningException;
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
InsetCommandParams::InsetCommandParams(string const & name)
: name_(name), preview_(false)
{
info_ = findInfo(name);
BOOST_ASSERT(info_);
params_.resize(info_->n);
}
InsetCommandParams::CommandInfo const *
InsetCommandParams::findInfo(std::string const & name)
{
// No parameter may be named "preview", because that is a required
// flag for all commands.
// InsetBibitem
if (name == "bibitem") {
static const char * const paramnames[] = {"label", "key", ""};
static const bool isoptional[] = {true, false};
static const CommandInfo info = {2, paramnames, isoptional};
return &info;
}
// InsetBibtex
if (name == "bibtex") {
static const char * const paramnames[] =
{"options", "btprint", "bibfiles", ""};
static const bool isoptional[] = {true, true, false};
static const CommandInfo info = {3, paramnames, isoptional};
return &info;
}
// InsetCitation
// FIXME: Use is_possible_cite_command() in
// src/frontends/controllers/biblio.C, see comment in src/factory.C.
if (name == "cite" || name == "citet" || name == "citep" || name == "citealt" ||
name == "citealp" || name == "citeauthor" || name == "citeyear" ||
name == "citeyearpar" || name == "citet*" || name == "citep*" ||
name == "citealt*" || name == "citealp*" ||
name == "citeauthor*" || name == "Citet" || name == "Citep" ||
name == "Citealt" || name == "Citealp" || name == "Citeauthor" ||
name == "Citet*" || name == "Citep*" || name == "Citealt*" ||
name == "Citealp*" || name == "Citeauthor*" ||
name == "citefield" || name == "citetitle" || name == "cite*") {
// standard cite does only take one argument if jurabib is
// not used, but jurabib extends this to two arguments, so
// we have to allow both here. InsetCitation takes care that
// LaTeX output is nevertheless correct.
static const char * const paramnames[] =
{"after", "before", "key", ""};
static const bool isoptional[] = {true, true, false};
static const CommandInfo info = {3, paramnames, isoptional};
return &info;
}
// InsetFloatlist
if (name == "floatlist") {
static const char * const paramnames[] = {"type", ""};
static const bool isoptional[] = {false};
static const CommandInfo info = {1, paramnames, isoptional};
return &info;
}
// InsetHfill
if (name == "hfill") {
static const char * const paramnames[] = {""};
static const CommandInfo info = {0, paramnames, 0};
return &info;
}
// InsetInclude
if (name == "include" || name == "input" || name == "verbatiminput" ||
name == "verbatiminput*") {
static const char * const paramnames[] = {"filename", ""};
static const bool isoptional[] = {false};
static const CommandInfo info = {1, paramnames, isoptional};
return &info;
}
// InsetIndex, InsetPrintIndex, InsetLabel
if (name == "index" || name == "printindex" || name == "label") {
static const char * const paramnames[] = {"name", ""};
static const bool isoptional[] = {false};
static const CommandInfo info = {1, paramnames, isoptional};
return &info;
}
New nomenclature inset from Ugras * src/LyXAction.C (LyXAction::init): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/insetbase.C (build_translator): ditto * src/LaTeXFeatures.C (LaTeXFeatures::getPackages): Add nomencl * src/insets/insetnomencl.[Ch]: new insets InsetNomencl and InsetPrintNomencl * src/insets/insetbase.h: Add NOMENCL_CODE and NOMENCL_PRINT_CODE * src/insets/insetcommandparams.C (InsetCommandParams::findInfo): Add nomenclature and printnomenclature (InsetCommandParams::getCommand): Extend end of command protection to cover commands with only optional arguments like printnomenclature * src/insets/insetert.C (InsetERT::getStatus): disable LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/Makefile.am: Add new files * src/frontends/qt4/Makefile.dialogs: ditto * src/frontends/qt4/Makefile.am: ditto * src/factory.C (createInset): Handle InsetNomencl and InsetPrintNomencl (readInset): ditto * src/buffer.C (LYX_FORMAT): increase * src/lyxfunc.C (LyXFunc::dispatch): Handle nomenclature * src/LaTeX.C (LaTeX::deleteFilesOnError): Delete .nls file (LaTeX::run): Run makeindex for nomenclature (LaTeX::runMakeIndex): handle nomenclature options (LaTeX::deplog): Recognize nomenclature file * src/frontends/qt4/QNomenclDialog.[Ch]: new * src/frontends/qt4/QNomencl.[Ch]: ditto * src/frontends/qt4/ui/QNomenclUi.ui: ditto * src/frontends/qt4/Dialogs.C (Dialogs::build): handle nomenclature dialog * src/text3.C (LyXText::dispatch): Handle LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT (LyXText::getStatus): Ditto * src/lfuns.h (kb_action): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * lib/lyx2lyx/LyX.py (format_relation): Update 1.5 format range * lib/lyx2lyx/lyx_1_5.py (revert_nomenclature): New (revert_printnomenclature): ditto * lib/chkconfig.ltx: Test for nomencl package * lib/doc/LaTeXConfig.lyx.in: Add nomencl package * lib/doc/Extended.lyx: Add documentation for nomencl * lib/ui/stdtoolbars.ui (Toolbar "extra" "Extra"): Add nomencl-insert * lib/ui/classic.ui: Add nomencl-insert and nomencl-print * lib/ui/stdmenus.ui: ditto * development/scons/scons_manifest.py: Add new files * development/FORMAT: Describe new format git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15739 a592a061-630c-0410-9148-cb99ea01b6c8
2006-11-04 17:55:36 +00:00
// InsetNomencl
if (name == "nomenclature") {
static const char * const paramnames[] = {"prefix", "symbol", "description", ""};
static const bool isoptional[] = {true, false, false};
static const CommandInfo info = {3, paramnames, isoptional};
return &info;
}
// InsetPrintNomencl
if (name == "printnomenclature") {
static const char * const paramnames[] = {"labelwidth", ""};
static const bool isoptional[] = {true};
static const CommandInfo info = {1, paramnames, isoptional};
return &info;
}
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
// InsetRef
if (name == "eqref" || name == "pageref" || name == "vpageref" ||
name == "vref" || name == "prettyref" || name == "ref") {
static const char * const paramnames[] =
{"name", "reference", ""};
static const bool isoptional[] = {true, false};
static const CommandInfo info = {2, paramnames, isoptional};
return &info;
}
// InsetTOC
if (name == "tableofcontents") {
static const char * const paramnames[] = {"type", ""};
static const bool isoptional[] = {false};
static const CommandInfo info = {1, paramnames, isoptional};
return &info;
}
// InsetUrl
if (name == "htmlurl" || name == "url") {
static const char * const paramnames[] =
{"name", "target", ""};
static const bool isoptional[] = {true, false};
static const CommandInfo info = {2, paramnames, isoptional};
return &info;
}
return 0;
}
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
void InsetCommandParams::setCmdName(string const & name)
{
name_ = name;
CommandInfo const * const info = findInfo(name);
BOOST_ASSERT(info);
ParamVector params(info->n);
// Overtake parameters with the same name
for (size_t i = 0; i < info_->n; ++i) {
int j = findToken(info->paramnames, info_->paramnames[i]);
if (j >= 0)
params[j] = params_[i];
}
info_ = info;
std::swap(params, params_);
}
void InsetCommandParams::scanCommand(string const & cmd)
{
string tcmdname, toptions, tsecoptions, tcontents;
if (cmd.empty()) return;
enum { WS, CMDNAME, OPTION, SECOPTION, CONTENT } state = WS;
// Used to handle things like \command[foo[bar]]{foo{bar}}
int nestdepth = 0;
for (string::size_type i = 0; i < cmd.length(); ++i) {
char const c = cmd[i];
if ((state == CMDNAME && c == ' ') ||
(state == CMDNAME && c == '[') ||
(state == CMDNAME && c == '{')) {
state = WS;
}
if ((state == OPTION && c == ']') ||
(state == SECOPTION && c == ']') ||
(state == CONTENT && c == '}')) {
if (nestdepth == 0) {
state = WS;
} else {
--nestdepth;
}
}
if ((state == OPTION && c == '[') ||
(state == SECOPTION && c == '[') ||
(state == CONTENT && c == '{')) {
++nestdepth;
}
switch (state) {
case CMDNAME: tcmdname += c; break;
case OPTION: toptions += c; break;
case SECOPTION: tsecoptions += c; break;
case CONTENT: tcontents += c; break;
case WS: {
char const b = i? cmd[i-1]: 0;
if (c == '\\') {
state = CMDNAME;
} else if (c == '[' && b != ']') {
state = OPTION;
nestdepth = 0; // Just to be sure
} else if (c == '[' && b == ']') {
state = SECOPTION;
nestdepth = 0; // Just to be sure
} else if (c == '{') {
state = CONTENT;
nestdepth = 0; // Just to be sure
}
break;
}
}
}
// Don't mess with this.
if (!tcmdname.empty()) setCmdName(tcmdname);
if (!toptions.empty()) setOptions(toptions);
if (!tsecoptions.empty()) setSecOptions(tsecoptions);
if (!tcontents.empty()) setContents(tcontents);
LYXERR(Debug::PARSER) << "Command <" << cmd
<< "> == <" << to_utf8(getCommand())
<< "> == <" << getCmdName()
<< '|' << getContents()
<< '|' << getOptions()
<< '|' << getSecOptions() << '>' << endl;
}
void InsetCommandParams::read(LyXLex & lex)
{
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
if (lex.isOK()) {
lex.next();
name_ = lex.getString();
info_ = findInfo(name_);
if (!info_) {
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
lex.printError("InsetCommand: Unknown inset name `$$Token'");
throw ExceptionMessage(WarningException,
_("Unknown inset name: "),
from_utf8(name_));
}
}
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
string token;
while (lex.isOK()) {
lex.next();
token = lex.getString();
if (token == "\\end_inset")
break;
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
// FIXME Why is preview_ read but not written?
if (token == "preview") {
lex.next();
preview_ = lex.getBool();
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
continue;
}
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
int const i = findToken(info_->paramnames, token);
if (i >= 0) {
lex.next(true);
params_[i] = lex.getDocString();
} else {
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
lex.printError("Unknown parameter name `$$Token' for command " + name_);
throw ExceptionMessage(WarningException,
_("Inset Command: ") + from_ascii(name_),
_("Unknown parameter name: ") + from_utf8(token));
}
}
if (token != "\\end_inset") {
lex.printError("Missing \\end_inset at this point. "
"Read: `$$Token'");
throw ExceptionMessage(WarningException,
_("Missing \\end_inset at this point."),
from_utf8(token));
}
}
void InsetCommandParams::write(ostream & os) const
{
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
os << "LatexCommand " << name_ << '\n';
for (size_t i = 0; i < info_->n; ++i)
if (!params_[i].empty())
// FIXME UNICODE
os << info_->paramnames[i] << ' '
<< LyXLex::quoteString(to_utf8(params_[i]))
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
<< '\n';
}
docstring const InsetCommandParams::getCommand() const
{
docstring s = '\\' + from_ascii(name_);
New nomenclature inset from Ugras * src/LyXAction.C (LyXAction::init): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/insetbase.C (build_translator): ditto * src/LaTeXFeatures.C (LaTeXFeatures::getPackages): Add nomencl * src/insets/insetnomencl.[Ch]: new insets InsetNomencl and InsetPrintNomencl * src/insets/insetbase.h: Add NOMENCL_CODE and NOMENCL_PRINT_CODE * src/insets/insetcommandparams.C (InsetCommandParams::findInfo): Add nomenclature and printnomenclature (InsetCommandParams::getCommand): Extend end of command protection to cover commands with only optional arguments like printnomenclature * src/insets/insetert.C (InsetERT::getStatus): disable LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/Makefile.am: Add new files * src/frontends/qt4/Makefile.dialogs: ditto * src/frontends/qt4/Makefile.am: ditto * src/factory.C (createInset): Handle InsetNomencl and InsetPrintNomencl (readInset): ditto * src/buffer.C (LYX_FORMAT): increase * src/lyxfunc.C (LyXFunc::dispatch): Handle nomenclature * src/LaTeX.C (LaTeX::deleteFilesOnError): Delete .nls file (LaTeX::run): Run makeindex for nomenclature (LaTeX::runMakeIndex): handle nomenclature options (LaTeX::deplog): Recognize nomenclature file * src/frontends/qt4/QNomenclDialog.[Ch]: new * src/frontends/qt4/QNomencl.[Ch]: ditto * src/frontends/qt4/ui/QNomenclUi.ui: ditto * src/frontends/qt4/Dialogs.C (Dialogs::build): handle nomenclature dialog * src/text3.C (LyXText::dispatch): Handle LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT (LyXText::getStatus): Ditto * src/lfuns.h (kb_action): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * lib/lyx2lyx/LyX.py (format_relation): Update 1.5 format range * lib/lyx2lyx/lyx_1_5.py (revert_nomenclature): New (revert_printnomenclature): ditto * lib/chkconfig.ltx: Test for nomencl package * lib/doc/LaTeXConfig.lyx.in: Add nomencl package * lib/doc/Extended.lyx: Add documentation for nomencl * lib/ui/stdtoolbars.ui (Toolbar "extra" "Extra"): Add nomencl-insert * lib/ui/classic.ui: Add nomencl-insert and nomencl-print * lib/ui/stdmenus.ui: ditto * development/scons/scons_manifest.py: Add new files * development/FORMAT: Describe new format git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15739 a592a061-630c-0410-9148-cb99ea01b6c8
2006-11-04 17:55:36 +00:00
bool noparam = true;
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
for (size_t i = 0; i < info_->n; ++i) {
if (info_->optional[i]) {
if (params_[i].empty()) {
// We need to write this parameter even if
// it is empty if nonempty optional parameters
// follow before the next required parameter.
for (size_t j = i + 1; j < info_->n; ++j) {
if (!info_->optional[j])
break;
if (!params_[j].empty()) {
s += "[]";
New nomenclature inset from Ugras * src/LyXAction.C (LyXAction::init): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/insetbase.C (build_translator): ditto * src/LaTeXFeatures.C (LaTeXFeatures::getPackages): Add nomencl * src/insets/insetnomencl.[Ch]: new insets InsetNomencl and InsetPrintNomencl * src/insets/insetbase.h: Add NOMENCL_CODE and NOMENCL_PRINT_CODE * src/insets/insetcommandparams.C (InsetCommandParams::findInfo): Add nomenclature and printnomenclature (InsetCommandParams::getCommand): Extend end of command protection to cover commands with only optional arguments like printnomenclature * src/insets/insetert.C (InsetERT::getStatus): disable LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/Makefile.am: Add new files * src/frontends/qt4/Makefile.dialogs: ditto * src/frontends/qt4/Makefile.am: ditto * src/factory.C (createInset): Handle InsetNomencl and InsetPrintNomencl (readInset): ditto * src/buffer.C (LYX_FORMAT): increase * src/lyxfunc.C (LyXFunc::dispatch): Handle nomenclature * src/LaTeX.C (LaTeX::deleteFilesOnError): Delete .nls file (LaTeX::run): Run makeindex for nomenclature (LaTeX::runMakeIndex): handle nomenclature options (LaTeX::deplog): Recognize nomenclature file * src/frontends/qt4/QNomenclDialog.[Ch]: new * src/frontends/qt4/QNomencl.[Ch]: ditto * src/frontends/qt4/ui/QNomenclUi.ui: ditto * src/frontends/qt4/Dialogs.C (Dialogs::build): handle nomenclature dialog * src/text3.C (LyXText::dispatch): Handle LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT (LyXText::getStatus): Ditto * src/lfuns.h (kb_action): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * lib/lyx2lyx/LyX.py (format_relation): Update 1.5 format range * lib/lyx2lyx/lyx_1_5.py (revert_nomenclature): New (revert_printnomenclature): ditto * lib/chkconfig.ltx: Test for nomencl package * lib/doc/LaTeXConfig.lyx.in: Add nomencl package * lib/doc/Extended.lyx: Add documentation for nomencl * lib/ui/stdtoolbars.ui (Toolbar "extra" "Extra"): Add nomencl-insert * lib/ui/classic.ui: Add nomencl-insert and nomencl-print * lib/ui/stdmenus.ui: ditto * development/scons/scons_manifest.py: Add new files * development/FORMAT: Describe new format git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15739 a592a061-630c-0410-9148-cb99ea01b6c8
2006-11-04 17:55:36 +00:00
noparam = false;
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
break;
}
}
New nomenclature inset from Ugras * src/LyXAction.C (LyXAction::init): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/insetbase.C (build_translator): ditto * src/LaTeXFeatures.C (LaTeXFeatures::getPackages): Add nomencl * src/insets/insetnomencl.[Ch]: new insets InsetNomencl and InsetPrintNomencl * src/insets/insetbase.h: Add NOMENCL_CODE and NOMENCL_PRINT_CODE * src/insets/insetcommandparams.C (InsetCommandParams::findInfo): Add nomenclature and printnomenclature (InsetCommandParams::getCommand): Extend end of command protection to cover commands with only optional arguments like printnomenclature * src/insets/insetert.C (InsetERT::getStatus): disable LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/Makefile.am: Add new files * src/frontends/qt4/Makefile.dialogs: ditto * src/frontends/qt4/Makefile.am: ditto * src/factory.C (createInset): Handle InsetNomencl and InsetPrintNomencl (readInset): ditto * src/buffer.C (LYX_FORMAT): increase * src/lyxfunc.C (LyXFunc::dispatch): Handle nomenclature * src/LaTeX.C (LaTeX::deleteFilesOnError): Delete .nls file (LaTeX::run): Run makeindex for nomenclature (LaTeX::runMakeIndex): handle nomenclature options (LaTeX::deplog): Recognize nomenclature file * src/frontends/qt4/QNomenclDialog.[Ch]: new * src/frontends/qt4/QNomencl.[Ch]: ditto * src/frontends/qt4/ui/QNomenclUi.ui: ditto * src/frontends/qt4/Dialogs.C (Dialogs::build): handle nomenclature dialog * src/text3.C (LyXText::dispatch): Handle LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT (LyXText::getStatus): Ditto * src/lfuns.h (kb_action): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * lib/lyx2lyx/LyX.py (format_relation): Update 1.5 format range * lib/lyx2lyx/lyx_1_5.py (revert_nomenclature): New (revert_printnomenclature): ditto * lib/chkconfig.ltx: Test for nomencl package * lib/doc/LaTeXConfig.lyx.in: Add nomencl package * lib/doc/Extended.lyx: Add documentation for nomencl * lib/ui/stdtoolbars.ui (Toolbar "extra" "Extra"): Add nomencl-insert * lib/ui/classic.ui: Add nomencl-insert and nomencl-print * lib/ui/stdmenus.ui: ditto * development/scons/scons_manifest.py: Add new files * development/FORMAT: Describe new format git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15739 a592a061-630c-0410-9148-cb99ea01b6c8
2006-11-04 17:55:36 +00:00
} else {
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
s += '[' + params_[i] + ']';
New nomenclature inset from Ugras * src/LyXAction.C (LyXAction::init): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/insetbase.C (build_translator): ditto * src/LaTeXFeatures.C (LaTeXFeatures::getPackages): Add nomencl * src/insets/insetnomencl.[Ch]: new insets InsetNomencl and InsetPrintNomencl * src/insets/insetbase.h: Add NOMENCL_CODE and NOMENCL_PRINT_CODE * src/insets/insetcommandparams.C (InsetCommandParams::findInfo): Add nomenclature and printnomenclature (InsetCommandParams::getCommand): Extend end of command protection to cover commands with only optional arguments like printnomenclature * src/insets/insetert.C (InsetERT::getStatus): disable LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/Makefile.am: Add new files * src/frontends/qt4/Makefile.dialogs: ditto * src/frontends/qt4/Makefile.am: ditto * src/factory.C (createInset): Handle InsetNomencl and InsetPrintNomencl (readInset): ditto * src/buffer.C (LYX_FORMAT): increase * src/lyxfunc.C (LyXFunc::dispatch): Handle nomenclature * src/LaTeX.C (LaTeX::deleteFilesOnError): Delete .nls file (LaTeX::run): Run makeindex for nomenclature (LaTeX::runMakeIndex): handle nomenclature options (LaTeX::deplog): Recognize nomenclature file * src/frontends/qt4/QNomenclDialog.[Ch]: new * src/frontends/qt4/QNomencl.[Ch]: ditto * src/frontends/qt4/ui/QNomenclUi.ui: ditto * src/frontends/qt4/Dialogs.C (Dialogs::build): handle nomenclature dialog * src/text3.C (LyXText::dispatch): Handle LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT (LyXText::getStatus): Ditto * src/lfuns.h (kb_action): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * lib/lyx2lyx/LyX.py (format_relation): Update 1.5 format range * lib/lyx2lyx/lyx_1_5.py (revert_nomenclature): New (revert_printnomenclature): ditto * lib/chkconfig.ltx: Test for nomencl package * lib/doc/LaTeXConfig.lyx.in: Add nomencl package * lib/doc/Extended.lyx: Add documentation for nomencl * lib/ui/stdtoolbars.ui (Toolbar "extra" "Extra"): Add nomencl-insert * lib/ui/classic.ui: Add nomencl-insert and nomencl-print * lib/ui/stdmenus.ui: ditto * development/scons/scons_manifest.py: Add new files * development/FORMAT: Describe new format git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15739 a592a061-630c-0410-9148-cb99ea01b6c8
2006-11-04 17:55:36 +00:00
noparam = false;
}
} else {
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
s += '{' + params_[i] + '}';
New nomenclature inset from Ugras * src/LyXAction.C (LyXAction::init): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/insetbase.C (build_translator): ditto * src/LaTeXFeatures.C (LaTeXFeatures::getPackages): Add nomencl * src/insets/insetnomencl.[Ch]: new insets InsetNomencl and InsetPrintNomencl * src/insets/insetbase.h: Add NOMENCL_CODE and NOMENCL_PRINT_CODE * src/insets/insetcommandparams.C (InsetCommandParams::findInfo): Add nomenclature and printnomenclature (InsetCommandParams::getCommand): Extend end of command protection to cover commands with only optional arguments like printnomenclature * src/insets/insetert.C (InsetERT::getStatus): disable LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/Makefile.am: Add new files * src/frontends/qt4/Makefile.dialogs: ditto * src/frontends/qt4/Makefile.am: ditto * src/factory.C (createInset): Handle InsetNomencl and InsetPrintNomencl (readInset): ditto * src/buffer.C (LYX_FORMAT): increase * src/lyxfunc.C (LyXFunc::dispatch): Handle nomenclature * src/LaTeX.C (LaTeX::deleteFilesOnError): Delete .nls file (LaTeX::run): Run makeindex for nomenclature (LaTeX::runMakeIndex): handle nomenclature options (LaTeX::deplog): Recognize nomenclature file * src/frontends/qt4/QNomenclDialog.[Ch]: new * src/frontends/qt4/QNomencl.[Ch]: ditto * src/frontends/qt4/ui/QNomenclUi.ui: ditto * src/frontends/qt4/Dialogs.C (Dialogs::build): handle nomenclature dialog * src/text3.C (LyXText::dispatch): Handle LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT (LyXText::getStatus): Ditto * src/lfuns.h (kb_action): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * lib/lyx2lyx/LyX.py (format_relation): Update 1.5 format range * lib/lyx2lyx/lyx_1_5.py (revert_nomenclature): New (revert_printnomenclature): ditto * lib/chkconfig.ltx: Test for nomencl package * lib/doc/LaTeXConfig.lyx.in: Add nomencl package * lib/doc/Extended.lyx: Add documentation for nomencl * lib/ui/stdtoolbars.ui (Toolbar "extra" "Extra"): Add nomencl-insert * lib/ui/classic.ui: Add nomencl-insert and nomencl-print * lib/ui/stdmenus.ui: ditto * development/scons/scons_manifest.py: Add new files * development/FORMAT: Describe new format git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15739 a592a061-630c-0410-9148-cb99ea01b6c8
2006-11-04 17:55:36 +00:00
noparam = false;
}
}
New nomenclature inset from Ugras * src/LyXAction.C (LyXAction::init): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/insetbase.C (build_translator): ditto * src/LaTeXFeatures.C (LaTeXFeatures::getPackages): Add nomencl * src/insets/insetnomencl.[Ch]: new insets InsetNomencl and InsetPrintNomencl * src/insets/insetbase.h: Add NOMENCL_CODE and NOMENCL_PRINT_CODE * src/insets/insetcommandparams.C (InsetCommandParams::findInfo): Add nomenclature and printnomenclature (InsetCommandParams::getCommand): Extend end of command protection to cover commands with only optional arguments like printnomenclature * src/insets/insetert.C (InsetERT::getStatus): disable LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * src/insets/Makefile.am: Add new files * src/frontends/qt4/Makefile.dialogs: ditto * src/frontends/qt4/Makefile.am: ditto * src/factory.C (createInset): Handle InsetNomencl and InsetPrintNomencl (readInset): ditto * src/buffer.C (LYX_FORMAT): increase * src/lyxfunc.C (LyXFunc::dispatch): Handle nomenclature * src/LaTeX.C (LaTeX::deleteFilesOnError): Delete .nls file (LaTeX::run): Run makeindex for nomenclature (LaTeX::runMakeIndex): handle nomenclature options (LaTeX::deplog): Recognize nomenclature file * src/frontends/qt4/QNomenclDialog.[Ch]: new * src/frontends/qt4/QNomencl.[Ch]: ditto * src/frontends/qt4/ui/QNomenclUi.ui: ditto * src/frontends/qt4/Dialogs.C (Dialogs::build): handle nomenclature dialog * src/text3.C (LyXText::dispatch): Handle LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT (LyXText::getStatus): Ditto * src/lfuns.h (kb_action): Add LFUN_NOMENCL_INSERT and LFUN_NOMENCL_PRINT * lib/lyx2lyx/LyX.py (format_relation): Update 1.5 format range * lib/lyx2lyx/lyx_1_5.py (revert_nomenclature): New (revert_printnomenclature): ditto * lib/chkconfig.ltx: Test for nomencl package * lib/doc/LaTeXConfig.lyx.in: Add nomencl package * lib/doc/Extended.lyx: Add documentation for nomencl * lib/ui/stdtoolbars.ui (Toolbar "extra" "Extra"): Add nomencl-insert * lib/ui/classic.ui: Add nomencl-insert and nomencl-print * lib/ui/stdmenus.ui: ditto * development/scons/scons_manifest.py: Add new files * development/FORMAT: Describe new format git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15739 a592a061-630c-0410-9148-cb99ea01b6c8
2006-11-04 17:55:36 +00:00
if (noparam)
// Make sure that following stuff does not change the
// command name.
s += "{}";
return s;
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
}
std::string const InsetCommandParams::getOptions() const
{
for (size_t i = 0; i < info_->n; ++i)
if (info_->optional[i])
return to_utf8(params_[i]);
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
lyxerr << "Programming error: get nonexisting option in "
<< name_ << " inset." << endl;;
return string();
}
std::string const InsetCommandParams::getSecOptions() const
{
bool first = true;
for (size_t i = 0; i < info_->n; ++i)
if (info_->optional[i]) {
if (first)
first = false;
else
return to_utf8(params_[i]);
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
}
// Happens in InsetCitation
lyxerr << "Programming error: get nonexisting second option in "
<< name_ << " inset." << endl;;
return string();
}
std::string const InsetCommandParams::getContents() const
{
for (size_t i = 0; i < info_->n; ++i)
if (!info_->optional[i])
return to_utf8(params_[i]);
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
BOOST_ASSERT(false);
return string();
}
void InsetCommandParams::setOptions(std::string const & o)
{
for (size_t i = 0; i < info_->n; ++i)
if (info_->optional[i]) {
params_[i] = from_utf8(o);
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
return;
}
lyxerr << "Programming error: set nonexisting option in "
<< name_ << " inset." << endl;;
}
void InsetCommandParams::setSecOptions(std::string const & s)
{
bool first = true;
for (size_t i = 0; i < info_->n; ++i)
if (info_->optional[i]) {
if (first)
first = false;
else {
params_[i] = from_utf8(s);
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
return;
}
}
// Happens in InsetCitation
lyxerr << "Programming error: set nonexisting second option in "
<< name_ << " inset." << endl;;
}
void InsetCommandParams::setContents(std::string const & c)
{
for (size_t i = 0; i < info_->n; ++i)
if (!info_->optional[i]) {
params_[i] = from_utf8(c);
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
return;
}
BOOST_ASSERT(false);
}
docstring const & InsetCommandParams::operator[](string const & name) const
{
int const i = findToken(info_->paramnames, name);
BOOST_ASSERT(i >= 0);
return params_[i];
}
docstring & InsetCommandParams::operator[](string const & name)
{
int const i = findToken(info_->paramnames, name);
BOOST_ASSERT(i >= 0);
return params_[i];
}
void InsetCommandParams::clear()
{
for (size_t i = 0; i < info_->n; ++i)
params_[i].clear();
}
bool operator==(InsetCommandParams const & o1,
InsetCommandParams const & o2)
{
Rework InsetCommandParams interface and file storage * src/insets/insetcommandparams.[Ch]: (operator[]): New, access a parameter (clear): New, clear all parameters (info_): New, stire info about this command (cmdname): Rename to name_ (contents, options, sec_options): Replace with params_. Parameters are now stored as docstring. (findInfo): New factor for command info for all commands (read, write): Use new syntax (parameter set and get methods): reimplemenmt for new parameter storage * src/insets/insetcommand.h (getParam): New, get a parameter (setParam): New, set a parameter (parameter set and get methods): Adjust to InsetCommandParams changes * src/insets/insetbibitem.[Ch] (write): Remove, not needed anymore (directWrite): ditto * src/insets/insetbibitem.C (InsetBibitem::read): Use InsetCommand::read * src/insets/insetref.C (InsetRef::latex): Use new InsetCommandParams interface * src/mathed/InsetMathHull.C (InsetMathHull::doDispatch): ditto * src/text3.C (LyXText::dispatch): ditto * src/factory.C (createInset): Create InsetCommandParams with command name (readInset): ditto (readInset): Remove error message for bibitem, since bibitem is now a normal command inset * src/buffer.C: Bump file format number * src/frontends/controllers/ControlCommand.[Ch] (ControlCommand): take an additional command name parameter * src/text.C (readParToken): Remove code for \bibitem * lib/lyx2lyx/LyX.py: Bump latest file format number * lib/lyx2lyx/lyx_1_5.py (convert_bibitem, convert_commandparams): new, convert to new format (revert_commandparams): new, convert to old format * development/FORMAT: document new format * many other files: Adjust to the changes above git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
2006-10-17 21:07:16 +00:00
return o1.name_ == o2.name_ &&
o1.info_ == o2.info_ &&
o1.params_ == o2.params_ &&
o1.preview_ == o2.preview_;
}
bool operator!=(InsetCommandParams const & o1,
InsetCommandParams const & o2)
{
return !(o1 == o2);
}
} // namespace lyx