anne/lyx_mirror
1
0
Fork 0
mirror of https://git.lyx.org/repos/lyx.git synced 2024-11-07 12:32:26 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
72812a2054
lyx_mirror/development/autotests/ExportTests.cmake

354 lines
13 KiB
CMake
Raw Normal View History

Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
#
# Copyright (c) 2014 Kornel Benko <kornel@lyx.org>
# Copyright (c) 2014 Scott Kostyshak <skotysh@lyx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. The name of the author may not be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
find_package(Perl)
if(PERL_FOUND)
set(DVI_FORMATS "dvi" "dvi3")
set(PDF_FORMATS "pdf" "pdf2" "pdf3" "pdf4" "pdf5")
else()
set(DVI_FORMATS "dvi")
set(PDF_FORMATS "pdf" "pdf2" "pdf3")
endif()
macro(getoutputformats filepath varname)
file(STRINGS "${filepath}" lines)
# What should we test, if default_output_format is not defined?
# For now we test everything ...
set(out_formats "xhtml" ${DVI_FORMATS} ${PDF_FORMATS})
foreach(_l ${lines})
if(_l MATCHES "^\\\\default_output_format +\([^ ]+\)")
set(_format ${CMAKE_MATCH_1})
if(_format STREQUAL "default")
set(out_formats "xhtml" ${DVI_FORMATS} ${PDF_FORMATS})
Cmake tests: Test pdf exports honoring the default output format The variable 'out_formats' was not set correctly in this case.
2015-04-01 09:50:31 +00:00
elseif(_format MATCHES "pdf$")
set(out_formats "xhtml" ${PDF_FORMATS})
elseif(_format MATCHES "dvi$")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
set(out_formats "xhtml" ${DVI_FORMATS})
Cmake tests: Test export xhtml always, independent of default output format
2015-04-02 07:51:53 +00:00
elseif(_format MATCHES "xhtml")
set(out_formats "xhtml")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
else()
# Respect all other output formats
Cmake tests: Test export xhtml always, independent of default output format
2015-04-02 07:51:53 +00:00
# like "eps3"
set(out_formats "xhtml" ${_format})
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endif()
break()
endif()
endforeach()
set(${varname} ${out_formats})
endmacro()
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
macro(findexpr found testname listname rsublabel)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
set(_found 0)
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(sublabel "")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
foreach(_itrx ${${listname}})
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
if ("${_itrx}" MATCHES "^Sublabel:[ \t]*\([a-z]+\)[ \t]*$")
set(sublabel "${CMAKE_MATCH_1}")
Cmake export tests: Added sublabel handling also to revertedTests As an example the inserted label 'chemgreek' shows also how to reset the sublabels.
2015-11-24 19:18:08 +00:00
if (sublabel STREQUAL "RESET")
set(sublabel "")
endif()
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
else()
set(_itr "^${_itrx}$")
if (${testname} MATCHES "${_itr}")
set(_found 1)
break()
endif()
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endif()
endforeach()
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
if (${_found})
if (NOT "${sublabel}" STREQUAL "")
set(${rsublabel} ${sublabel})
endif()
endif()
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
set(${found} ${_found})
endmacro()
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
macro(maketestname testname reverted listreverted listignored listunreliable listlabels)
set(sublabel "")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
string(REGEX MATCH "\\/[a-z][a-z](_[A-Z][A-Z])?\\/" _v ${${testname}})
if(_v)
string(REGEX REPLACE "\\/" "" _v ${_v})
set(listrevertedx ${listreverted}_${_v})
set(listignoredx ${listignored}_${_v})
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(listunreliablex ${listunreliable}_${_v})
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
else()
set(listrevertedx ${listreverted})
set(listignoredx ${listignored})
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(listunreliablex ${listunreliable})
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endif()
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
findexpr(mfound ${testname} ${listignoredx} sublabel)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
if (NOT mfound)
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
# check if they are unreliable
set(sublabel "")
findexpr(nsfound ${testname} ${listunreliablex} sublabel)
Cmake export tests: More tests to be inverted, suspended or made non-standard All comments in revertedTests comes from Günter Milde Non standard test is new. It should collect all tests which may not work because of some missing non-standard tex package or some exotic system font.
2015-11-17 17:22:45 +00:00
if (nsfound)
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
if (NOT "${sublabel}" STREQUAL "")
list(APPEND ${listlabels} ${sublabel})
string(TOUPPER "${sublabel}_" tmpprefix)
else()
set(tmpprefix "")
endif()
set(${testname} "UNRELIABLE.${tmpprefix}${${testname}}")
Cmake export tests: More tests to be inverted, suspended or made non-standard All comments in revertedTests comes from Günter Milde Non standard test is new. It should collect all tests which may not work because of some missing non-standard tex package or some exotic system font.
2015-11-17 17:22:45 +00:00
else ()
Cmake export tests: Added development/mathmacros to the list
2015-11-22 14:10:46 +00:00
string(REGEX MATCH "_(systemF|texF|pdf3|pdf2|pdf|dvi|lyx16|xhtml)$" _v ${${testname}})
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(sublabel "")
Cmake export tests: More tests to be inverted, suspended or made non-standard All comments in revertedTests comes from Günter Milde Non standard test is new. It should collect all tests which may not work because of some missing non-standard tex package or some exotic system font.
2015-11-17 17:22:45 +00:00
# check if test _may_ be in listreverted
if (_v)
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
findexpr(mfound ${testname} ${listrevertedx} sublabel)
Cmake export tests: More tests to be inverted, suspended or made non-standard All comments in revertedTests comes from Günter Milde Non standard test is new. It should collect all tests which may not work because of some missing non-standard tex package or some exotic system font.
2015-11-17 17:22:45 +00:00
else()
set(mfound OFF)
endif()
if (NOT mfound)
set(${reverted} 0)
else()
set(${reverted} 1)
Cmake export tests: Added sublabel handling also to revertedTests As an example the inserted label 'chemgreek' shows also how to reset the sublabels.
2015-11-24 19:18:08 +00:00
if (NOT sublabel STREQUAL "")
string(TOUPPER "${sublabel}_" tmpprefix)
else()
set(tmpprefix "ctest_")
endif()
set(${testname} "INVERTED_SEE-README.${tmpprefix}${${testname}}")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
if (NOT sublabel STREQUAL "")
list(APPEND ${listlabels} ${sublabel})
endif()
Cmake export tests: More tests to be inverted, suspended or made non-standard All comments in revertedTests comes from Günter Milde Non standard test is new. It should collect all tests which may not work because of some missing non-standard tex package or some exotic system font.
2015-11-17 17:22:45 +00:00
endif()
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endif()
else()
set(${testname} "")
endif()
endmacro()
Cmake export tests: Check for reused labels included Labels defined in .*Tests should be unique. Now at least a warning is produced.
2015-11-24 20:23:38 +00:00
# This labels should not be used in .*Tests files
set(known_labels "export" "key" "layout" "load" "lyx2lyx"
"examples" "manuals" "mathmacros" "reverted" "templates" "unreliable" "suspended"
"module" "roundtrip" "url")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
macro(loadTestList filename resList)
# Create list of strings from a file without comments
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
file(STRINGS ${filename} tempList ENCODING "UTF-8")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
set(${resList})
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(sublabel)
Cmake export tests: Check for reused labels included Labels defined in .*Tests should be unique. Now at least a warning is produced.
2015-11-24 20:23:38 +00:00
set(mylabels "")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
foreach(_l ${tempList})
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(_newl "${_l}")
string(REGEX REPLACE "[ \t]*#.*$" "" _newl "${_l}")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
if(_newl)
string(REGEX REPLACE "(\\/|\\||\\(|\\))" " " _vxx ${_newl})
string(REGEX MATCHALL " ([a-z][a-z](_[A-Z][A-Z])?) " _vx ${_vxx})
Cmake export tests: Check for reused labels included Labels defined in .*Tests should be unique. Now at least a warning is produced.
2015-11-24 20:23:38 +00:00
if (_newl MATCHES "^Sublabel:[ \t]*\([a-zA-Z]+\)")
set(labname ${CMAKE_MATCH_1})
if (NOT labname STREQUAL "RESET")
list(REMOVE_ITEM mylabels ${labname})
list(APPEND mylabels ${labname})
endif()
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(sublabel ${_newl})
endif()
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
if(_vx)
foreach(_v ${_vx})
string(REGEX REPLACE " " "" _v ${_v})
#message(STATUS " ==> ${resList}_${_v}")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
if (NOT ${sublabel} STREQUAL "${sublabel}_${_v}")
list(APPEND ${resList}_${_v} "${sublabel}")
set(${sublabel}_${_v} "${sublabel}")
endif()
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
list(APPEND ${resList}_${_v} "${_newl}")
endforeach()
if(_newl MATCHES "\\(\\|")
#message(STATUS " ==> ${resList}")
list(APPEND ${resList} "${_newl}")
endif()
else()
#message(STATUS " ==> ${resList}")
list(APPEND ${resList} "${_newl}")
endif()
endif()
endforeach()
Cmake export tests: Check for reused labels included Labels defined in .*Tests should be unique. Now at least a warning is produced.
2015-11-24 20:23:38 +00:00
foreach(_l ${mylabels})
list(FIND known_labels ${_l} _ff)
if (_ff GREATER -1)
message(STATUS "Label \"${_l}\" already in use. Reused in ${filename}")
else()
list(APPEND known_labels ${_l})
endif()
endforeach()
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endmacro()
Cmake export tests: Removed unneded parameter
2015-11-25 09:17:46 +00:00
loadTestList(revertedTests revertedTests)
loadTestList(ignoredTests ignoredTests)
loadTestList(suspendedTests suspendedTests)
loadTestList(unreliableTests unreliableTests)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
Cmake tests: Add 'suspendedTests' This file holds regular expression to select which of the inverted export test cases will be suspended. These tests will not be executed with the call 'ctest -L export'.
2015-11-04 10:44:07 +00:00
macro(handlesuspended TestName reverted testlabel)
Cmake export tests: Created sub-labels manuals, examples, templates, mathmacros, autotests. To test all export use 'ctest -L export'. This is unchanged. The following lists directories and assigned sub-label lib/doc: manuals lib/templates: templates lib/examples: examples development/mathmacro: mathmacros autotests: autotests
2015-11-22 12:44:27 +00:00
set(mylabel ${${testlabel}})
Cmake tests: Add 'suspendedTests' This file holds regular expression to select which of the inverted export test cases will be suspended. These tests will not be executed with the call 'ctest -L export'.
2015-11-04 10:44:07 +00:00
set(myreverted ${reverted})
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(sublabel)
Cmake export tests: More tests to be inverted, suspended or made non-standard All comments in revertedTests comes from Günter Milde Non standard test is new. It should collect all tests which may not work because of some missing non-standard tex package or some exotic system font.
2015-11-17 17:22:45 +00:00
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
# check for unreliable
if ("${TestName}" MATCHES "^UNRELIABLE")
list(REMOVE_ITEM mylabel "export" "reverted" "templates" "mathmacros" "manuals")
list(APPEND mylabel "unreliable")
Cmake export tests: Finished categorizing tests. Now 'ctest -L export' should be without errors If there _are_ errors, the appropriate test should go to nonstandardTests 'ctest -L reverted' should be without errors If there _are_ errors, the appropriate test should go to nonstandardTests 'ctest -L nonstandard' Tests here may, or may not fail. Depends of installed tex extensions
2015-11-20 09:20:10 +00:00
set(myreverted 0)
elseif (${reverted})
Cmake tests: Add 'suspendedTests' This file holds regular expression to select which of the inverted export test cases will be suspended. These tests will not be executed with the call 'ctest -L export'.
2015-11-04 10:44:07 +00:00
# check suspension only for reverted tests
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
findexpr(tfound TestName suspendedTests sublabel)
Cmake tests: Add 'suspendedTests' This file holds regular expression to select which of the inverted export test cases will be suspended. These tests will not be executed with the call 'ctest -L export'.
2015-11-04 10:44:07 +00:00
if (tfound)
set(mylabel "suspended")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
if (sublabel)
list(APPEND mylabel ${sublabel})
endif()
Cmake tests: Add 'suspendedTests' This file holds regular expression to select which of the inverted export test cases will be suspended. These tests will not be executed with the call 'ctest -L export'.
2015-11-04 10:44:07 +00:00
set(myreverted 0) # if test is to be suspended, remove the 'reverted' flag
endif()
endif()
setmarkedtestlabel(${TestName} ${myreverted} ${mylabel})
endmacro()
Cmake export tests: Added development/mathmacros to the list
2015-11-22 14:10:46 +00:00
# preparing to add e.g. development/mathmacros to the foreach() loop
Cmake export tests: Added directory "autotests/export"
2015-11-23 12:12:53 +00:00
foreach(libsubfolderx lib/doc lib/examples lib/templates development/mathmacros autotests/export)
Cmake export tests: Created sub-labels manuals, examples, templates, mathmacros, autotests. To test all export use 'ctest -L export'. This is unchanged. The following lists directories and assigned sub-label lib/doc: manuals lib/templates: templates lib/examples: examples development/mathmacro: mathmacros autotests: autotests
2015-11-22 12:44:27 +00:00
set(testlabel "export")
if (libsubfolderx MATCHES "lib/doc")
list(APPEND testlabel "manuals")
elseif (libsubfolderx MATCHES "lib/examples")
list(APPEND testlabel "examples")
elseif (libsubfolderx MATCHES "lib/templates")
list(APPEND testlabel "templates")
Cmake export tests: Added development/mathmacros to the list
2015-11-22 14:10:46 +00:00
elseif (libsubfolderx MATCHES "development/mathmacros")
Cmake export tests: Created sub-labels manuals, examples, templates, mathmacros, autotests. To test all export use 'ctest -L export'. This is unchanged. The following lists directories and assigned sub-label lib/doc: manuals lib/templates: templates lib/examples: examples development/mathmacro: mathmacros autotests: autotests
2015-11-22 12:44:27 +00:00
list(APPEND testlabel "mathmacros")
elseif (libsubfolderx MATCHES "autotests/.+")
list(APPEND testlabel "autotests")
endif()
Cmake tests: Add 'suspendedTests' This file holds regular expression to select which of the inverted export test cases will be suspended. These tests will not be executed with the call 'ctest -L export'.
2015-11-04 10:44:07 +00:00
set(LIBSUB_SRC_DIR "${TOP_SRC_DIR}/${libsubfolderx}")
Cmake export tests: Created sub-labels manuals, examples, templates, mathmacros, autotests. To test all export use 'ctest -L export'. This is unchanged. The following lists directories and assigned sub-label lib/doc: manuals lib/templates: templates lib/examples: examples development/mathmacro: mathmacros autotests: autotests
2015-11-22 12:44:27 +00:00
string(REGEX REPLACE "^(lib|development|autotests)/" "" libsubfolder "${libsubfolderx}")
Cmake export tests: Added development/mathmacros to the list
2015-11-22 14:10:46 +00:00
set(LIBSUB_SRC_DIR "${TOP_SRC_DIR}/${libsubfolderx}")
message(STATUS "Handling export dir ${LIBSUB_SRC_DIR}")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
file(GLOB_RECURSE lyx_files RELATIVE "${LIBSUB_SRC_DIR}" "${LIBSUB_SRC_DIR}/*.lyx")
list(SORT lyx_files)
# Now create 2 lists. One for files in a language dir, one without
set(lang_lyx_files)
set(nolang_lyx_files)
foreach(f ${lyx_files})
string(REGEX MATCHALL "^[a-z][a-z](_[A-Z][A-Z])?\\/" _v ${f})
if(_v)
list(APPEND lang_lyx_files ${f})
else()
list(APPEND nolang_lyx_files ${f})
endif()
endforeach()
foreach(f ${nolang_lyx_files} ${lang_lyx_files})
# Strip extension
string(REGEX REPLACE "\\.lyx$" "" f ${f})
set(TestName "export/${libsubfolder}/${f}_lyx16")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(mytestlabel ${testlabel})
maketestname(TestName reverted revertedTests ignoredTests unreliableTests mytestlabel)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
if(TestName)
add_test(NAME ${TestName}
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/${LYX_HOME}"
COMMAND ${CMAKE_COMMAND} -DLYX_ROOT=${LIBSUB_SRC_DIR}
-DLYX_TESTS_USERDIR=${LYX_TESTS_USERDIR}
-Dlyx=$<TARGET_FILE:${_lyx}>
-DWORKDIR=${CMAKE_CURRENT_BINARY_DIR}/${LYX_HOME}
-DLYX_USERDIR_VER=${LYX_USERDIR_VER}
-Dformat=lyx16x
-Dextension=16.lyx
-Dfile=${f}
-Dreverted=${reverted}
-DTOP_SRC_DIR=${TOP_SRC_DIR}
-DPERL_EXECUTABLE=${PERL_EXECUTABLE}
-P "${TOP_SRC_DIR}/development/autotests/export.cmake")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
handlesuspended(${TestName} ${reverted} mytestlabel) # checking for suspended lyx16 exports
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endif()
if(LYX_PYTHON_EXECUTABLE)
Cmake export tests: Created sub-labels manuals, examples, templates, mathmacros, autotests. To test all export use 'ctest -L export'. This is unchanged. The following lists directories and assigned sub-label lib/doc: manuals lib/templates: templates lib/examples: examples development/mathmacro: mathmacros autotests: autotests
2015-11-22 12:44:27 +00:00
set(lyx2lyxtestlabel "lyx2lyx")
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
# For use of lyx2lyx we need the python executable
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(mytestlabel ${lyx2lyxtestlabel})
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
set(TestName "lyx2lyx/${libsubfolder}/${f}")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
maketestname(TestName reverted revertedTests ignoredTests unreliableTests mytestlabel)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
if(TestName)
add_test(NAME ${TestName}
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/${LYX_HOME}"
COMMAND ${CMAKE_COMMAND}
"-DLYX_PYTHON_EXECUTABLE=${LYX_PYTHON_EXECUTABLE}"
"-DLYX2LYX=${TOP_SRC_DIR}/lib/lyx2lyx/lyx2lyx"
"-DLYX_TESTS_USERDIR=${LYX_TESTS_USERDIR}"
"-DLYXFILE=${LIBSUB_SRC_DIR}/${f}.lyx"
-P "${TOP_SRC_DIR}/development/autotests/lyx2lyxtest.cmake")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
handlesuspended(${TestName} ${reverted} mytestlabel)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endif()
endif()
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(loadtestlabel "load")
set(mytestlabel ${loadtestlabel})
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
set(TestName "check_load/${libsubfolder}/${f}")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
maketestname(TestName reverted revertedTests ignoredTests unreliableTests mytestlabel)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
if(TestName)
add_test(NAME ${TestName}
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/${LYX_HOME}"
COMMAND ${CMAKE_COMMAND} -DLYXFILE=${LIBSUB_SRC_DIR}/${f}.lyx
-DLYX_TESTS_USERDIR=${LYX_TESTS_USERDIR}
-Dlyx=$<TARGET_FILE:${_lyx}>
-DPARAMS_DIR=${TOP_SRC_DIR}/development/autotests
-DWORKDIR=${CMAKE_CURRENT_BINARY_DIR}/${LYX_HOME}
-P "${TOP_SRC_DIR}/development/autotests/check_load.cmake")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
handlesuspended(${TestName} ${reverted} mytestlabel)
Cmake tests: Make check_load tests run in sequence. Running parallel commands 'lyx -batch ...' with files from the same directory has lead to conflicts.
2015-03-28 21:54:08 +00:00
set_tests_properties(${TestName} PROPERTIES RUN_SERIAL ON)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endif()
getoutputformats("${LIBSUB_SRC_DIR}/${f}.lyx" formatlist)
foreach(format ${formatlist})
if(format MATCHES "dvi3|pdf4|pdf5")
set(fonttypes "texF" "systemF")
else()
set(fonttypes "defaultF")
endif()
foreach(fonttype ${fonttypes})
if(fonttype MATCHES "defaultF")
set(TestName "export/${libsubfolder}/${f}_${format}")
else()
set(TestName "export/${libsubfolder}/${f}_${format}_${fonttype}")
endif()
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
set(mytestlabel ${testlabel})
maketestname(TestName reverted revertedTests ignoredTests unreliableTests mytestlabel)
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
if(TestName)
add_test(NAME ${TestName}
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/${LYX_HOME}"
COMMAND ${CMAKE_COMMAND} -DLYX_ROOT=${LIBSUB_SRC_DIR}
-DLYX_TESTS_USERDIR=${LYX_TESTS_USERDIR}
-Dlyx=$<TARGET_FILE:${_lyx}>
-DWORKDIR=${CMAKE_CURRENT_BINARY_DIR}/${LYX_HOME}
-Dformat=${format}
-Dfonttype=${fonttype}
-Dextension=${format}
-Dfile=${f}
-Dreverted=${reverted}
-DTOP_SRC_DIR=${TOP_SRC_DIR}
-DPERL_EXECUTABLE=${PERL_EXECUTABLE}
-P "${TOP_SRC_DIR}/development/autotests/export.cmake")
Cmake export tests: Renamed nonstandardTests to unreliableTests and introduce sublabels Sublabels section in *.Tests starts with 'Sublabel: name' and is valid until start of a new sublabel. 'name' contains only ascii characters [a-z]+
2015-11-24 17:42:36 +00:00
handlesuspended(${TestName} ${reverted} mytestlabel) # check for suspended pdf/dvi exports
Cmake tests: Optimizing the cmake configuration time The configuration time suffers mostly on checking, which of the export tests is to be reverted. 1.) There is a new configuration flag now, "LYX_ENABLE_EXOPRT_TESTS. If not set (default) no export tests are created. 2.) If set, then the optimization halves the time needed for creation of tests. The effect on my side: a.) Until now the time was: ~ 26 seconds b.) The optimized time is now: ~ 16 seconds c.) With not enabled export tests: ~ 5 seconds
2014-06-21 19:15:54 +00:00
endif()
endforeach()
endforeach()
endforeach()
endforeach()
Reference in New Issue Copy Permalink