lyx_mirror/src/frontends/qt4/GuiSelectionManager.cpp

476 lines
12 KiB
C++
Raw Normal View History

/**
* \file GuiSelectionManager.cpp
* This file is part of LyX, the document processor.
* Licence details can be found in the file COPYING.
*
* \author Richard Heck
* \author Et Alia
*
* Some of the material in this file previously appeared in
* GuiCitationDialog.cpp.
*
* Full author contact details are available in file CREDITS.
*/
#include <config.h>
#include "GuiSelectionManager.h"
#include "support/debug.h"
#include <QAbstractItemModel>
#include <QAbstractListModel>
#include <QItemSelection>
#include <QListView>
#include <QKeyEvent>
#include <QPushButton>
#ifdef KeyPress
#undef KeyPress
#endif
#ifdef ControlModifier
#undef ControlModifier
#endif
#ifdef FocusIn
#undef FocusIn
#endif
namespace lyx {
namespace frontend {
2017-02-26 21:15:49 +00:00
GuiSelectionManager::GuiSelectionManager(QObject * parent,
QAbstractItemView * avail,
QAbstractItemView * sel,
QPushButton * add,
QPushButton * del,
QPushButton * up,
QPushButton * down,
QAbstractListModel * amod,
QAbstractItemModel * smod,
int const main_sel_col)
: QObject(parent), availableLV(avail), selectedLV(sel),
addPB(add), deletePB(del), upPB(up), downPB(down),
availableModel(amod), selectedModel(smod),
selectedHasFocus_(false), main_sel_col_(main_sel_col)
{
selectedLV->setModel(smod);
availableLV->setModel(amod);
selectedLV->setSelectionBehavior(QAbstractItemView::SelectRows);
selectedLV->setSelectionMode(QAbstractItemView::SingleSelection);
connect(availableLV->selectionModel(),
SIGNAL(currentChanged(QModelIndex, QModelIndex)),
this, SLOT(availableChanged(QModelIndex, QModelIndex)));
connect(selectedLV->selectionModel(),
SIGNAL(currentChanged(QModelIndex, QModelIndex)),
this, SLOT(selectedChanged(QModelIndex, QModelIndex)));
connect(availableLV->selectionModel(),
SIGNAL(selectionChanged(QItemSelection, QItemSelection)),
this, SLOT(availableChanged(QItemSelection, QItemSelection)));
connect(selectedLV->selectionModel(),
SIGNAL(selectionChanged(QItemSelection, QItemSelection)),
this, SLOT(selectedChanged(QItemSelection, QItemSelection)));
connect(selectedLV->itemDelegate(), SIGNAL(commitData(QWidget*)),
this, SLOT(selectedEdited()));
2017-02-26 21:15:49 +00:00
connect(addPB, SIGNAL(clicked()),
this, SLOT(addPB_clicked()));
2017-02-26 21:15:49 +00:00
connect(deletePB, SIGNAL(clicked()),
this, SLOT(deletePB_clicked()));
2017-02-26 21:15:49 +00:00
connect(upPB, SIGNAL(clicked()),
this, SLOT(upPB_clicked()));
2017-02-26 21:15:49 +00:00
connect(downPB, SIGNAL(clicked()),
this, SLOT(downPB_clicked()));
2017-02-26 21:15:49 +00:00
connect(availableLV, SIGNAL(doubleClicked(QModelIndex)),
this, SLOT(availableLV_doubleClicked(QModelIndex)));
2017-02-26 21:15:49 +00:00
availableLV->installEventFilter(this);
selectedLV->installEventFilter(this);
}
void GuiSelectionManager::update()
{
updateAddPB();
updateDelPB();
updateDownPB();
updateUpPB();
}
QModelIndex GuiSelectionManager::getSelectedIndex(int const c) const
{
QModelIndexList avail = availableLV->selectionModel()->selectedIndexes();
QModelIndexList sel = selectedLV->selectionModel()->selectedRows(c);
bool const have_avl = !avail.isEmpty();
bool const have_sel = !sel.isEmpty();
if (selectedFocused()) {
if (have_sel)
return sel.front();
if (have_avl)
return avail.front();
}
else { // available has focus
if (have_avl)
return avail.front();
if (have_sel)
return sel.front();
}
return QModelIndex();
}
void GuiSelectionManager::updateAddPB()
{
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
int const arows = availableModel->rowCount();
QModelIndexList const availSels =
availableLV->selectionModel()->selectedIndexes();
addPB->setEnabled(arows > 0 &&
!availSels.isEmpty() &&
!isSelected(availSels.first()));
}
void GuiSelectionManager::updateDelPB()
{
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
int const srows = selectedModel->rowCount();
if (srows == 0) {
deletePB->setEnabled(false);
return;
}
QModelIndexList const selSels =
selectedLV->selectionModel()->selectedIndexes();
int const sel_nr = selSels.empty() ? -1 : selSels.first().row();
deletePB->setEnabled(sel_nr >= 0);
}
void GuiSelectionManager::updateUpPB()
{
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
int const srows = selectedModel->rowCount();
if (srows == 0) {
upPB->setEnabled(false);
return;
}
QModelIndexList const selSels =
selectedLV->selectionModel()->selectedIndexes();
int const sel_nr = selSels.empty() ? -1 : selSels.first().row();
upPB->setEnabled(sel_nr > 0);
}
void GuiSelectionManager::updateDownPB()
{
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
int const srows = selectedModel->rowCount();
if (srows == 0) {
downPB->setEnabled(false);
return;
}
QModelIndexList const selSels =
selectedLV->selectionModel()->selectedIndexes();
int const sel_nr = selSels.empty() ? -1 : selSels.first().row();
downPB->setEnabled(sel_nr >= 0 && sel_nr < srows - 1);
}
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
bool GuiSelectionManager::isSelected(const QModelIndex & idx)
{
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
if (selectedModel->rowCount() == 0)
return false;
QVariant const & str = availableModel->data(idx, Qt::DisplayRole);
QModelIndexList qmil =
selectedModel->match(selectedModel->index(0, main_sel_col_),
Qt::DisplayRole, str, 1,
Qt::MatchFlags(Qt::MatchExactly | Qt::MatchWrap));
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
return !qmil.empty();
}
void GuiSelectionManager::availableChanged(QItemSelection const & qis, QItemSelection const &)
{
QModelIndexList il = qis.indexes();
if (il.empty())
return;
availableChanged(il.front(), QModelIndex());
}
void GuiSelectionManager::availableChanged(const QModelIndex & idx, const QModelIndex &)
{
if (!idx.isValid())
return;
2017-02-26 21:15:49 +00:00
selectedHasFocus_ = false;
updateHook();
}
void GuiSelectionManager::selectedChanged(QItemSelection const & qis, QItemSelection const &)
{
QModelIndexList il = qis.indexes();
if (il.empty())
return;
selectedChanged(il.front(), QModelIndex());
}
void GuiSelectionManager::selectedChanged(const QModelIndex & idx, const QModelIndex &)
{
if (!idx.isValid())
return;
2017-02-26 21:15:49 +00:00
selectedHasFocus_ = true;
updateHook();
}
void GuiSelectionManager::selectedEdited()
{
selectionChanged();
}
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
bool GuiSelectionManager::insertRowToSelected(int i,
QMap<int, QVariant> const & itemData)
{
if (i <= -1)
i = 0;
if (i > selectedModel->rowCount())
i = selectedModel->rowCount();
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
if (!selectedModel->insertRow(i))
return false;
return selectedModel->setItemData(selectedModel->index(i, main_sel_col_), itemData);
}
bool GuiSelectionManager::insertRowToSelected(int i, QMap<int, QMap<int, QVariant>> & qms)
{
if (i <= -1)
i = 0;
if (i > selectedModel->rowCount())
i = selectedModel->rowCount();
if (!selectedModel->insertRow(i))
return false;
bool res = true;
QMap<int, QMap<int, QVariant>>::const_iterator it = qms.constBegin();
for (; it != qms.constEnd(); ++it)
res &= selectedModel->setItemData(selectedModel->index(i, it.key()), it.value());
return res;
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
}
void GuiSelectionManager::addPB_clicked()
{
QModelIndexList selIdx =
availableLV->selectionModel()->selectedIndexes();
if (selIdx.isEmpty())
return;
QModelIndex const idxToAdd = selIdx.first();
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
QModelIndex const idx = selectedLV->currentIndex();
int const srows = selectedModel->rowCount();
2017-02-26 21:15:49 +00:00
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
QMap<int, QVariant> qm = availableModel->itemData(idxToAdd);
insertRowToSelected(srows, qm);
2017-02-26 21:15:49 +00:00
selectionChanged(); //signal
if (idx.isValid())
selectedLV->setCurrentIndex(idx);
2017-02-26 21:15:49 +00:00
updateHook();
}
void GuiSelectionManager::deletePB_clicked()
{
QModelIndexList selIdx =
selectedLV->selectionModel()->selectedIndexes();
if (selIdx.isEmpty())
return;
QModelIndex idx = selIdx.first();
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
selectedModel->removeRow(idx.row());
selectionChanged(); //signal
2017-02-26 21:15:49 +00:00
int nrows = selectedLV->model()->rowCount();
if (idx.row() == nrows) //was last item on list
idx = idx.sibling(idx.row() - 1, idx.column());
2017-02-26 21:15:49 +00:00
if (nrows > 1)
selectedLV->setCurrentIndex(idx);
else if (nrows == 1)
selectedLV->setCurrentIndex(selectedLV->model()->index(0, 0));
selectedHasFocus_ = (nrows > 0);
updateHook();
}
void GuiSelectionManager::upPB_clicked()
{
QModelIndexList selIdx =
selectedLV->selectionModel()->selectedIndexes();
if (selIdx.isEmpty())
return;
QModelIndex idx = selIdx.first();
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
int const pos = idx.row();
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
if (pos <= 0)
return;
QMap<int, QMap<int, QVariant>> qms;
QList<QModelIndex>::const_iterator it = selIdx.constBegin();
for (; it != selIdx.constEnd(); ++it)
qms[it->column()] = selectedModel->itemData(*it);
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
selectedModel->removeRow(pos);
insertRowToSelected(pos - 1, qms);
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
selectionChanged(); //signal
selectedLV->setCurrentIndex(idx.sibling(idx.row() - 1, idx.column()));
selectedHasFocus_ = true;
updateHook();
}
void GuiSelectionManager::downPB_clicked()
{
QModelIndexList selIdx =
selectedLV->selectionModel()->selectedIndexes();
if (selIdx.isEmpty())
return;
QModelIndex idx = selIdx.first();
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
int const pos = idx.row();
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
if (pos >= selectedModel->rowCount() - 1)
return;
QMap<int, QMap<int, QVariant>> qms;
QList<QModelIndex>::const_iterator it = selIdx.constBegin();
for (; it != selIdx.constEnd(); ++it)
qms[it->column()] = selectedModel->itemData(*it);
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
selectedModel->removeRow(pos);
insertRowToSelected(pos + 1, qms);
This commit changes the way individual LyXModule's are represented, both internally and in the .lyx files. The earlier version represented them by their `descriptive name', e.g., "Endnote" or "Theorems (AMS)", these being the same names used in the UI. This was a mistake, as becomes readily apparent when one starts to think about translating these strings. The modules ought to be represented by their filename, without the extension, just as TextClass's are. The changes that accomplish this part are in ModuleList.{h,cpp}, configure.py, and the *.module files themselves. This is a format change, and the lyx2lyx is in those files. By itself, that change would not be major, except for the fact that we do not want the module to be represented in the UI by its filename---e.g., theorems-std---but rather by a descriptive name, such as "Theorems". But that change turns out to be wholly non-trivial. The mechanism for choosing modules was the same as---indeed, was borrowed from---that in GuiCitation: You get a list of modules, and choosing them involves moving strings from one QListView to another. The models underlying these views are just QStringListModels, which means that, when you want to know what modules have been selected, you see what strings are in the "selected" QListView. But these are just the descriptive names, and we can't look up a module by its descriptive name if it's been translated. That, indeed, was the whole point of the change to the new representation. So, we need a more complicated model underlying the QListView, one that will pair an identifying string---the filename minus the extension, in this case---with each item. This turns out not to be terribly difficult, though it took rather a while for me to understand why it's not difficult. There are two parts: (i) GuiSelectionManger gets re-written to use any QAbstractListModel, not just a QStringListModel. This actually seems to improve the code, independently. (ii) We then subclass QAbstractListModel to get the associated ID string, using the Qt::UserRole slot associated with each item to store its ID. This would be almost completely trivial if QAbstractListItem::itemData() included the QVariant associated with this role, but it doesn't, so there are some additional hoops through which to jump. The new model, a GuiIdListModel, is defined in the files by that name. The changes in GuiSelectionManger.{h,cpp} make it more abstract; the changes in GuiDocument.{h,cpp} adapt it to the new framework. I've also updated the module documenation to accord with this change. git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22501 a592a061-630c-0410-9148-cb99ea01b6c8
2008-01-12 04:28:12 +00:00
selectionChanged(); //signal
2017-02-26 21:15:49 +00:00
selectedLV->setCurrentIndex(idx.sibling(idx.row() + 1, idx.column()));
selectedHasFocus_ = true;
updateHook();
}
void GuiSelectionManager::availableLV_doubleClicked(const QModelIndex & idx)
{
if (isSelected(idx) || !addPB->isEnabled())
return;
2017-02-26 21:15:49 +00:00
if (idx.isValid())
selectedHasFocus_ = false;
addPB_clicked();
//updateHook() will be emitted there
}
bool GuiSelectionManager::eventFilter(QObject * obj, QEvent * event)
{
QEvent::Type etype = event->type();
if (obj == availableLV) {
if (etype == QEvent::KeyPress) {
QKeyEvent * keyEvent = static_cast<QKeyEvent *>(event);
int const keyPressed = keyEvent->key();
Qt::KeyboardModifiers const keyModifiers = keyEvent->modifiers();
// Enter key without modifier will add current item.
// Ctrl-Enter will add it and close the dialog.
// This is designed to work both with the main enter key
// and the one on the numeric keypad.
if (keyPressed == Qt::Key_Enter || keyPressed == Qt::Key_Return) {
if (addPB->isEnabled()) {
if (!keyModifiers) {
addPB_clicked();
} else if (keyModifiers == Qt::ControlModifier ||
keyModifiers == Qt::KeypadModifier ||
keyModifiers == (Qt::ControlModifier | Qt::KeypadModifier)) {
addPB_clicked();
okHook(); //signal
}
}
event->accept();
return true;
}
else if (keyPressed == Qt::Key_Right) {
selectedLV->setFocus();
selectedLV->setCurrentIndex(selectedLV->currentIndex());
event->accept();
return true;
}
} else if (etype == QEvent::FocusIn) {
if (selectedHasFocus_) {
selectedHasFocus_ = false;
updateHook();
}
event->accept();
return true;
}
} else if (obj == selectedLV) {
if (etype == QEvent::KeyPress) {
QKeyEvent * keyEvent = static_cast<QKeyEvent *>(event);
int const keyPressed = keyEvent->key();
Qt::KeyboardModifiers const keyModifiers = keyEvent->modifiers();
// Delete or backspace key will delete current item
// ...with control modifier will clear the list
if (keyPressed == Qt::Key_Delete || keyPressed == Qt::Key_Backspace) {
if (keyModifiers == Qt::NoModifier && deletePB->isEnabled()) {
deletePB_clicked();
updateHook();
} else if (keyModifiers == Qt::ControlModifier) {
selectedModel->removeRows(0, selectedModel->rowCount());
updateHook();
} else
return QObject::eventFilter(obj, event);
}
// Ctrl-Up activates upPB
else if (keyPressed == Qt::Key_Up) {
if (keyModifiers == Qt::ControlModifier) {
if (upPB->isEnabled())
upPB_clicked();
event->accept();
return true;
}
}
// Ctrl-Down activates downPB
else if (keyPressed == Qt::Key_Down) {
if (keyModifiers == Qt::ControlModifier) {
if (downPB->isEnabled())
downPB_clicked();
event->accept();
return true;
}
}
else if (keyPressed == Qt::Key_Left) {
availableLV->setFocus();
availableLV->setCurrentIndex(availableLV->currentIndex());
event->accept();
return true;
}
} else if (etype == QEvent::FocusIn) {
if (!selectedHasFocus_) {
selectedHasFocus_ = true;
updateHook();
}
event->accept();
return true;
}
}
return QObject::eventFilter(obj, event);
}
} // namespace frontend
} // namespace lyx
#include "moc_GuiSelectionManager.cpp"