iNew configure flag --with-lyxname. Misc small compilation fixes.

git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@411 a592a061-630c-0410-9148-cb99ea01b6c8
This commit is contained in:
Jean-Marc Lasgouttes 2000-01-10 16:28:29 +00:00
parent 77b87ff5e7
commit 1fd5e5ed97
11 changed files with 74 additions and 26 deletions

View File

@ -1,3 +1,29 @@
2000-01-10 Jean-Marc Lasgouttes <Jean-Marc.Lasgouttes@inria.fr>
* src/support/block.h: disable operator T* (), since it causes
problems with both compilers I tried. See comments in the file.
* lib/reLyX/configure.in: do not define LYX_DIR. support flag
--with-lyxname.
* lib/reLyX/reLyX.in: change LYX_DIR to pkgdatadir; change env.
variable LYX_DIR_10x to LYX_DIR_11x.
* src/Makefile.am: replace variable LYX_DIR with pkgdatadir.
* INSTALL: document --with-lyxname.
* NEWS: ditto.
* configure.in: new configure flag --with-lyxname which allows to
choose the name under which lyx is installed. Default is "lyx", of
course. It used to be possible to do this with --program-suffix,
but the later has in fact a different meaning for autoconf.
* src/support/lstrings.h (lstrchr): reformat a bit.
* src/lyxlex.h: include LIstream.h, for Sun CC this time.
* src/mathed/math_defs.h: ditto.
2000-01-08 Lars Gullik Bjønnes <larsbj@lyx.org> 2000-01-08 Lars Gullik Bjønnes <larsbj@lyx.org>
* src/bufferlist.C (close): don't call insetUnlock if the buffer * src/bufferlist.C (close): don't call insetUnlock if the buffer

11
INSTALL
View File

@ -119,7 +119,12 @@ flags:
o --with-extra-prefix[=DIRECTORY] that is equivalent to o --with-extra-prefix[=DIRECTORY] that is equivalent to
--with-extra-lib=DIRECTORY/lib --with-extra-inc=DIRECTORY/include --with-extra-lib=DIRECTORY/lib --with-extra-inc=DIRECTORY/include
If DIRECTORY is not specified, the current prefix is used. If DIRECTORY is not specified, the current prefix is used.
o --with-lyxname=STRING sets the name of the installed LyX binary and
of the LyX library directory to STRING. This may be used to
compile lyx as lyx-1.1 and avoid clashes with earlier/later
versions. Default is "lyx".
o --with-two-colors=[yes|no] that forces LyX to use two colors pixmaps o --with-two-colors=[yes|no] that forces LyX to use two colors pixmaps
(bitmaps) instead of the full-colored standard ones. Defaults to no. (bitmaps) instead of the full-colored standard ones. Defaults to no.
@ -151,10 +156,6 @@ Moreover, the following generic configure flags may be useful:
installation. [defaults to where lyx has already been installed or installation. [defaults to where lyx has already been installed or
/usr/local] /usr/local]
o --program-suffix=STRING sets the name of the installed LyX binary and
of the LyX library directory to lyxSTRING. This may be used to
compile lyx as lyx-1.0.0 and avoid clashes with earlier/later versions.
o --datadir=DIRECTORY gives the directory where all extra LyX o --datadir=DIRECTORY gives the directory where all extra LyX
files (lyxrc example, documentation, templates and layouts files (lyxrc example, documentation, templates and layouts
definitions) will be installed. definitions) will be installed.

5
NEWS
View File

@ -18,6 +18,11 @@ In the user-visible department, we find:
- improved translations, in particular in finnish (overhauled UI - improved translations, in particular in finnish (overhauled UI
translation), dutch (tutorial and examples), german translation), dutch (tutorial and examples), german
- new configure flag --with-lyxname which allows to choose the name
under which lyx is installed. Default is "lyx", of course. It used
to be possible to do this with --program-suffix, but the later has
in fact a different meaning for autoconf.
And of course, a lot of old bugs have been replaced by new ones ;) And of course, a lot of old bugs have been replaced by new ones ;)

View File

@ -11,7 +11,11 @@ LYX_GET_VERSION(${srcdir}/src/version.h)
AC_CANONICAL_SYSTEM AC_CANONICAL_SYSTEM
AC_VALIDATE_CACHE_SYSTEM_TYPE AC_VALIDATE_CACHE_SYSTEM_TYPE
AM_INIT_AUTOMAKE(lyx, $VERSION) AC_ARG_WITH(lyxname,
[ --with-lyxname the name under which lyx will be installed],
[lyxname=$withval],[lyxname=lyx])
AM_INIT_AUTOMAKE($lyxname, $VERSION)
# The list of languages known to LyX # The list of languages known to LyX
# This is needed by GNU gettext # This is needed by GNU gettext

View File

@ -3,27 +3,27 @@ AC_INIT(reLyX.in)
AC_PREREQ(2.13) dnl We want to use autoconf 2.13 AC_PREREQ(2.13) dnl We want to use autoconf 2.13
AC_CONFIG_AUX_DIR(../../config) AC_CONFIG_AUX_DIR(../../config)
dnl PACKAGE=reLyX
dnl Do this to install in $datadir/lyx/reLyX instead of $datadir/reLyX/reLyX
AC_ARG_WITH(lyxname,
[ --with-lyxname the name under which lyx will be installed],
[lyxname=$withval],[lyxname=lyx])
dnl must make a macro that gets the reLyX version
VERSION=2.0
AM_INIT_AUTOMAKE($lyxname, $VERSION)
AC_PREFIX_PROGRAM(reLyX) AC_PREFIX_PROGRAM(reLyX)
# fix the value of the prefixes. # fix the value of the prefixes.
test "x$prefix" = xNONE && prefix=$ac_default_prefix test "x$prefix" = xNONE && prefix=$ac_default_prefix
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
dnl PACKAGE=reLyX
dnl Do this to install in $datadir/lyx/reLyX instead of $datadir/reLyX/reLyX
PACKAGE=lyx
VERSION=2.0
dnl must make a macro that gets the reLyX version
AM_INIT_AUTOMAKE($PACKAGE, $VERSION)
dnl Checks for programs. dnl Checks for programs.
AC_PROG_INSTALL AC_PROG_INSTALL
RELYX_CHECK_PERL RELYX_CHECK_PERL
dnl Finish the work dnl Finish the work
test $program_suffix = NONE && program_suffix=
LYX_DIR=`eval "echo \`eval \"echo ${datadir}/lyx${program_suffix}\"\`"`
AC_SUBST(LYX_DIR)
AC_OUTPUT(Makefile reLyX noweb2lyx, chmod 755 reLyX noweb2lyx) AC_OUTPUT(Makefile reLyX noweb2lyx, chmod 755 reLyX noweb2lyx)
RELYX_CHECK_ERRORS RELYX_CHECK_ERRORS

View File

@ -18,7 +18,7 @@ my $mainscript = "reLyXmain.pl";
# Do this in a BEGIN block so it's done before the 'use lib' below # Do this in a BEGIN block so it's done before the 'use lib' below
BEGIN{ BEGIN{
# This points to LyX library dir, e.g. /usr/local/share/lyx # This points to LyX library dir, e.g. /usr/local/share/lyx
$lyxdir = "@LYX_DIR@"; $lyxdir = "@pkgdatadir@";
# This is just "." if you compiled from the source directory # This is just "." if you compiled from the source directory
my $srcdir = "@srcdir@"; my $srcdir = "@srcdir@";
# This is the name of the program, usually just "lyx" # This is the name of the program, usually just "lyx"
@ -34,8 +34,8 @@ my $dir = &dirname($name);
my $i = 0; my $i = 0;
# case 1: for developers, e.g. - reLyX and $mainscript in same directory # case 1: for developers, e.g. - reLyX and $mainscript in same directory
$maybe_dir[$i++] = "."; $maybe_dir[$i++] = ".";
# case 2: environment variable LYX_DIR_12 has been set # case 2: environment variable LYX_DIR_11x has been set
if (exists $ENV{LYX_DIR_10x}) { $maybe_dir[$i++] = "$ENV{LYX_DIR_10x}/reLyX"}; if (exists $ENV{LYX_DIR_11x}) { $maybe_dir[$i++] = "$ENV{LYX_DIR_11x}/reLyX"};
# case 3: ran make but not make install. # case 3: ran make but not make install.
$maybe_dir[$i++] = "$dir/$srcdir"; $maybe_dir[$i++] = "$dir/$srcdir";
# case 4: e.g., reLyX in /opt/bin, $mainscript in /opt/share/lyx/reLyX # case 4: e.g., reLyX in /opt/bin, $mainscript in /opt/share/lyx/reLyX

View File

@ -7,7 +7,6 @@ lyx_DEPENDENCIES = mathed/libmathed.o insets/libinsets.o support/libsupport.la
lyx_LDADD = $(lyx_DEPENDENCIES) @INTLLIBS@ $(LYX_LIBS) lyx_LDADD = $(lyx_DEPENDENCIES) @INTLLIBS@ $(LYX_LIBS)
EXTRA_DIST = config.h.in stamp-h.in cheaders EXTRA_DIST = config.h.in stamp-h.in cheaders
ETAGS_ARGS = --c++ ETAGS_ARGS = --c++
LYX_DIR = $(datadir)/$(PACKAGE)
INCLUDES = -I${top_srcdir}/images INCLUDES = -I${top_srcdir}/images
localedir = $(datadir)/locale localedir = $(datadir)/locale
lyx_SOURCES = \ lyx_SOURCES = \
@ -180,8 +179,8 @@ lyx_main.o: lyx_main.C lyx_main.h config.h version.h debug.h gettext.h \
lyx_gui.h lyx_gui_misc.h lyxrc.h support/path.h support/filetools.h \ lyx_gui.h lyx_gui_misc.h lyxrc.h support/path.h support/filetools.h \
bufferlist.h support/FileInfo.h lastfiles.h intl.h \ bufferlist.h support/FileInfo.h lastfiles.h intl.h \
lyxserver.h layout.h gettext.h lyxserver.h layout.h gettext.h
$(CXXCOMPILE) -DLYX_DIR=\"$(LYX_DIR)\" -DTOP_SRCDIR=\"$(top_srcdir)\" \ $(CXXCOMPILE) -DLYX_DIR=\"$(pkgdatadir)\" \
-c $(top_srcdir)/src/lyx_main.C -DTOP_SRCDIR=\"$(top_srcdir)\" -c $(top_srcdir)/src/lyx_main.C
main.o: main.C config.h lyx_main.h gettext.h LString.h support/filetools.h main.o: main.C config.h lyx_main.h gettext.h LString.h support/filetools.h
$(CXXCOMPILE) -DLOCALEDIR=\"$(localedir)\" -c $(top_srcdir)/src/main.C $(CXXCOMPILE) -DLOCALEDIR=\"$(localedir)\" -c $(top_srcdir)/src/main.C

View File

@ -14,6 +14,8 @@
#include <fstream> #include <fstream>
using std::filebuf; using std::filebuf;
#include "support/LIstream.h"
#include "LString.h" #include "LString.h"
/// ///

View File

@ -24,11 +24,14 @@
#pragma interface #pragma interface
#endif #endif
#include "support/LIstream.h"
#include "LString.h" #include "LString.h"
#include "debug.h" #include "debug.h"
#include "array.h" #include "array.h"
/// ///
enum math_align { enum math_align {
/// ///

View File

@ -17,7 +17,11 @@ public:
typedef T * iterator; typedef T * iterator;
typedef T const * const_iterator; typedef T const * const_iterator;
size_type size() const { return s; } size_type size() const { return s; }
operator T* () { return arr; } #warning I disabled this to be able to compile... (JMarc)
// I think that, sor the same reason that string->char* is not
// automatic, we should have a c_array() method to do that. However,
// Lars, it is your choice...
// operator T* () { return arr; }
reference at(int i) { reference at(int i) {
Assert(i >= 0 && i < s); Assert(i >= 0 && i < s);
return arr[i]; return arr[i];

View File

@ -32,8 +32,12 @@ T * lstrchr(T const * t, int c)
{ {
Assert(t); // we don't want null pointers Assert(t); // we don't want null pointers
T * r = const_cast<T*>(t); T * r = const_cast<T*>(t);
while(*r != 0) while(*r != 0) {
if (*r == c) return r; else ++r; if (*r == c)
return r;
else
++r;
}
return 0; return 0;
} }