iNew configure flag --with-lyxname. Misc small compilation fixes.

git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@411 a592a061-630c-0410-9148-cb99ea01b6c8

ChangeLog

@@ -1,3 +1,29 @@
+2000-01-10  Jean-Marc Lasgouttes  <Jean-Marc.Lasgouttes@inria.fr>
+
+	* src/support/block.h: disable operator T* (), since it causes
+	problems with both compilers I tried. See comments in the file.
+
+	* lib/reLyX/configure.in: do not define LYX_DIR. support flag
+	--with-lyxname. 
+
+	* lib/reLyX/reLyX.in: change LYX_DIR to pkgdatadir; change env.
+	variable LYX_DIR_10x to LYX_DIR_11x.
+
+	* src/Makefile.am: replace variable LYX_DIR with pkgdatadir.
+
+	* INSTALL: document --with-lyxname.
+	* NEWS: ditto.
+
+	* configure.in: new configure flag --with-lyxname which allows to
+	choose the name under which lyx is installed. Default is "lyx", of
+	course. It used to be possible to do this with --program-suffix,
+	but the later has in fact a different meaning for autoconf.
+
+	* src/support/lstrings.h (lstrchr): reformat a bit.
+
+	* src/lyxlex.h: include LIstream.h, for Sun CC this time.
+	* src/mathed/math_defs.h: ditto.
+
 2000-01-08  Lars Gullik Bjønnes  <larsbj@lyx.org>
 
 	* src/bufferlist.C (close): don't call insetUnlock if the buffer

INSTALL

@@ -121,6 +121,11 @@ flags:
        --with-extra-lib=DIRECTORY/lib --with-extra-inc=DIRECTORY/include
     If DIRECTORY is not specified, the current prefix is used.
 
+  o --with-lyxname=STRING sets the name of the installed LyX binary and 
+    of the LyX library directory to STRING. This may be used to
+    compile lyx as lyx-1.1 and avoid clashes with earlier/later
+    versions. Default is "lyx". 
+
   o --with-two-colors=[yes|no] that forces LyX to use two colors pixmaps
     (bitmaps) instead of the full-colored standard ones.  Defaults to no.
 
@@ -151,10 +156,6 @@ Moreover, the following generic configure flags may be useful:
     installation. [defaults to where lyx has already been installed or
     /usr/local]
 
-  o --program-suffix=STRING sets the name of the installed LyX binary and 
-      of the LyX library directory to lyxSTRING. This may be used to
-      compile lyx as lyx-1.0.0 and avoid clashes with earlier/later versions.
-
   o --datadir=DIRECTORY gives the directory where all extra LyX 
     files (lyxrc example, documentation, templates and layouts
     definitions) will be installed. 

NEWS

@@ -18,6 +18,11 @@ In the user-visible department, we find:
 - improved translations, in particular in finnish (overhauled UI
   translation), dutch (tutorial and examples), german
 
+- new configure flag --with-lyxname which allows to choose the name
+  under which lyx is installed. Default is "lyx", of course. It used
+  to be possible to do this with --program-suffix, but the later has
+  in fact a different meaning for autoconf.
+
 And of course, a lot of old bugs have been replaced by new ones ;)
 
 

configure.in

@@ -11,7 +11,11 @@ LYX_GET_VERSION(${srcdir}/src/version.h)
 AC_CANONICAL_SYSTEM
 AC_VALIDATE_CACHE_SYSTEM_TYPE
 
-AM_INIT_AUTOMAKE(lyx, $VERSION)
+AC_ARG_WITH(lyxname,
+  [  --with-lyxname          the name under which lyx will be installed],
+  [lyxname=$withval],[lyxname=lyx])
+
+AM_INIT_AUTOMAKE($lyxname, $VERSION)
 
 # The list of languages known to LyX
 # This is needed by GNU gettext

lib/reLyX/configure.in

@@ -3,27 +3,27 @@ AC_INIT(reLyX.in)
 AC_PREREQ(2.13) dnl We want to use autoconf 2.13
 AC_CONFIG_AUX_DIR(../../config)
 
+dnl PACKAGE=reLyX
+dnl Do this to install in $datadir/lyx/reLyX instead of $datadir/reLyX/reLyX
+
+AC_ARG_WITH(lyxname,
+  [  --with-lyxname          the name under which lyx will be installed],
+  [lyxname=$withval],[lyxname=lyx])
+
+dnl must make a macro that gets the reLyX version
+VERSION=2.0
+AM_INIT_AUTOMAKE($lyxname, $VERSION)
+
 AC_PREFIX_PROGRAM(reLyX)
 # fix the value of the prefixes.
 test "x$prefix" = xNONE && prefix=$ac_default_prefix
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-dnl PACKAGE=reLyX
-dnl Do this to install in $datadir/lyx/reLyX instead of $datadir/reLyX/reLyX
-PACKAGE=lyx
-VERSION=2.0
-dnl must make a macro that gets the reLyX version
-AM_INIT_AUTOMAKE($PACKAGE, $VERSION)
-
 dnl Checks for programs.
 AC_PROG_INSTALL
 RELYX_CHECK_PERL
 
 dnl Finish the work
-test $program_suffix = NONE && program_suffix=
-LYX_DIR=`eval "echo \`eval \"echo ${datadir}/lyx${program_suffix}\"\`"`
-AC_SUBST(LYX_DIR)
-
 AC_OUTPUT(Makefile reLyX noweb2lyx, chmod 755 reLyX noweb2lyx)
 
 RELYX_CHECK_ERRORS

lib/reLyX/reLyX.in

@@ -18,7 +18,7 @@ my $mainscript = "reLyXmain.pl";
 # Do this in a BEGIN block so it's done before the 'use lib' below
 BEGIN{
 # This points to LyX library dir, e.g. /usr/local/share/lyx
-$lyxdir = "@LYX_DIR@";
+$lyxdir = "@pkgdatadir@";
 # This is just "." if you compiled from the source directory
 my $srcdir = "@srcdir@";
 # This is the name of the program, usually just "lyx"
@@ -34,8 +34,8 @@ my $dir = &dirname($name);
 my $i = 0;
 # case 1: for developers, e.g. - reLyX and $mainscript in same directory
 $maybe_dir[$i++] = ".";
-# case 2: environment variable LYX_DIR_12 has been set
-if (exists $ENV{LYX_DIR_10x}) { $maybe_dir[$i++] = "$ENV{LYX_DIR_10x}/reLyX"};
+# case 2: environment variable LYX_DIR_11x has been set
+if (exists $ENV{LYX_DIR_11x}) { $maybe_dir[$i++] = "$ENV{LYX_DIR_11x}/reLyX"};
 # case 3: ran make but not make install.
 $maybe_dir[$i++] = "$dir/$srcdir";
 # case 4: e.g., reLyX in /opt/bin, $mainscript in /opt/share/lyx/reLyX

src/Makefile.am

@@ -7,7 +7,6 @@ lyx_DEPENDENCIES = mathed/libmathed.o insets/libinsets.o support/libsupport.la
 lyx_LDADD = $(lyx_DEPENDENCIES) @INTLLIBS@ $(LYX_LIBS)
 EXTRA_DIST = config.h.in stamp-h.in cheaders
 ETAGS_ARGS = --c++
-LYX_DIR = $(datadir)/$(PACKAGE)
 INCLUDES = -I${top_srcdir}/images
 localedir = $(datadir)/locale
 lyx_SOURCES = \
@@ -180,8 +179,8 @@ lyx_main.o: lyx_main.C lyx_main.h config.h version.h debug.h gettext.h \
 	lyx_gui.h lyx_gui_misc.h lyxrc.h support/path.h support/filetools.h \
 	bufferlist.h support/FileInfo.h lastfiles.h intl.h \
 	lyxserver.h layout.h gettext.h
-	$(CXXCOMPILE) -DLYX_DIR=\"$(LYX_DIR)\" -DTOP_SRCDIR=\"$(top_srcdir)\" \
-	-c $(top_srcdir)/src/lyx_main.C
+	$(CXXCOMPILE) -DLYX_DIR=\"$(pkgdatadir)\" \
+	  -DTOP_SRCDIR=\"$(top_srcdir)\" -c $(top_srcdir)/src/lyx_main.C
 
 main.o: main.C config.h lyx_main.h gettext.h LString.h support/filetools.h
 	$(CXXCOMPILE) -DLOCALEDIR=\"$(localedir)\" -c $(top_srcdir)/src/main.C

src/lyxlex.h

@@ -14,6 +14,8 @@
 #include <fstream>
 using std::filebuf;
 
+#include "support/LIstream.h"
+
 #include "LString.h"
 
 ///

src/mathed/math_defs.h

@@ -24,11 +24,14 @@
 #pragma interface
 #endif
 
+#include "support/LIstream.h"
+
 #include "LString.h"
 #include "debug.h"
 
 #include "array.h"
 
+
 ///
 enum math_align {
 	///

src/support/block.h

@@ -17,7 +17,11 @@ public:
 	typedef T * iterator;
 	typedef T const * const_iterator;
 	size_type size() const { return s; }
-	operator T* () { return arr; }
+#warning I disabled this to be able to compile... (JMarc)
+  // I think that, sor the same reason that string->char* is not
+  // automatic, we should have a c_array() method to do that. However,
+  // Lars, it is your choice...  
+  //	operator T* () { return arr; }
 	reference at(int i) {
 		Assert(i >= 0 && i < s);
 		return arr[i];

src/support/lstrings.h

@@ -32,8 +32,12 @@ T * lstrchr(T const * t, int c)
 {
   Assert(t); // we don't want null pointers
   T * r = const_cast<T*>(t);
-  while(*r != 0) 
-    if (*r == c) return r; else ++r;
+  while(*r != 0) { 
+    if (*r == c) 
+      return r; 
+    else 
+      ++r;
+  }
   return 0;
 }