Some cleanups to compile with dec cxx. We are not there yet though.

git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@189 a592a061-630c-0410-9148-cb99ea01b6c8

ChangeLog

@@ -1,3 +1,21 @@
+1999-10-13  Jean-Marc Lasgouttes  <Jean-Marc.Lasgouttes@inria.fr>
+
+	* src/support/DebugStream.[Ch]: remove the explicit std:: before
+	streams classes and types, add the proper 'using' statements when
+	MODERN_STL is defined.
+	
+	* src/debug.h: move the << operator definition after the inclusion
+	of DebugStream.h
+
+	* src/support/filetools.C: include "LAssert.h", which is needed
+	later. 
+
+	* src/insets/Makefile.am, src/mathed/Makefile.am: add src/support
+	to includes. 
+
+	* src/lyxfont.h, src/commandtags.h, src/mathed/math_defs.h:
+	include "debug.h" to define a proper ostream.
+
 1999-10-12  Asger Alstrup Nielsen  <alstrup@alstrup.galaxy.dk>
 
 	* src/sys*: Cleaned up the Systemcall stuff a bit. Added "kill(int)"

src/commandtags.h

@@ -10,6 +10,7 @@
 #ifndef COMMANDTAGS_H
 #define COMMANDTAGS_H
 
+#include "debug.h"
 
 /** These are all the lyxfunctions (as enums).
  */
@@ -240,7 +241,6 @@ enum kb_action {
 	LFUN_LASTACTION  /* this marks the end of the table */
 };
 
-class ostream;
 ostream & operator<<(ostream &, kb_action);
 #endif
 

src/debug.h

@@ -82,11 +82,12 @@ struct Debug {
 	}
 };
 
-///
-ostream & operator<<(ostream & o, Debug::type t);
 
 #include "support/DebugStream.h"
 
+///
+ostream & operator<<(ostream & o, Debug::type t);
+
 extern DebugStream lyxerr;
 
 #endif

src/insets/Makefile.am

@@ -4,7 +4,7 @@ noinst_PROGRAMS = insets.o
 LIBS=
 LDFLAGS=
 ETAGS_ARGS = --c++
-INCLUDES = -I${srcdir}/../
+INCLUDES = -I${srcdir}/../ -I${srcdir}/../support
 CXXLINK = $(LD) -r -o $(noinst_PROGRAMS)
 
 insets_o_SOURCES = \
@@ -47,4 +47,4 @@ insets_o_SOURCES = \
 	insettoc.h \
 	inseturl.C \
 	inseturl.h \
-	lyxinset.h
+	lyxinset.h

src/lyxfont.h

@@ -17,6 +17,7 @@
 
 #include FORMS_H_LOCATION
 #include "LString.h"
+#include "debug.h"
 
 // It might happen that locale.h defines ON and OFF. This is not good
 // for us, since we use these names below. But of course this is due

src/mathed/Makefile.am

@@ -4,7 +4,7 @@ noinst_PROGRAMS = mathed.o
 LIBS=
 LDFLAGS=
 ETAGS_ARGS = --c++
-INCLUDES = -I${top_srcdir}/images -I${srcdir}/../
+INCLUDES = -I${top_srcdir}/images -I${srcdir}/../ -I${srcdir}/../support
 CXXLINK = $(LD) -r -o $(noinst_PROGRAMS)
 
 mathed_o_SOURCES = array.h \

src/mathed/math_defs.h

@@ -26,6 +26,7 @@
 
 #include <cstdio>
 #include "LString.h"
+#include "debug.h"
 
 #include "array.h"
 

src/support/DebugStream.C

@@ -27,12 +27,12 @@ ostream & operator<<(ostream & o, Debug::type t)
     that is the intention. You can call it a no-op streambuffer, and
     the ostream that uses it will be a no-op stream.
 */
-class nullbuf : public std::streambuf {
+class nullbuf : public streambuf {
 protected:
 	///
 	virtual int sync() { return 0; }
 	/// 
-	virtual std::streamsize xsputn(char const *, std::streamsize n) {
+	virtual streamsize xsputn(char const *, streamsize n) {
 		// fakes a purge of the buffer by returning n
 		return n;
 	}
@@ -46,11 +46,11 @@ protected:
 /** A streambuf that sends the output to two different streambufs. These
     can be any kind of streambufs.
 */
-class teebuf : public std::streambuf {
+class teebuf : public streambuf {
 public:
 	///
-	teebuf(std::streambuf * b1, std::streambuf * b2)
-		: std::streambuf(), sb1(b1), sb2(b2) {}
+	teebuf(streambuf * b1, streambuf * b2)
+		: streambuf(), sb1(b1), sb2(b2) {}
 protected:
 	///
 	virtual int sync() {
@@ -63,7 +63,7 @@ protected:
 #endif
 	}
 	///
-	virtual std::streamsize xsputn(char const * p, std::streamsize n) {
+	virtual streamsize xsputn(char const * p, streamsize n) {
 #ifdef MODERN_STL
 		sb2->sputn(p, n);
 		return sb1->sputn(p, n);
@@ -84,17 +84,17 @@ protected:
 	}
 private:
 	///
-	std::streambuf * sb1;
+	streambuf * sb1;
 	///
-	std::streambuf * sb2;
+	streambuf * sb2;
 };
 
 ///
-class debugbuf : public std::streambuf {
+class debugbuf : public streambuf {
 public:
 	///
-	debugbuf(std::streambuf * b)
-		: std::streambuf(), sb(b) {}
+	debugbuf(streambuf * b)
+		: streambuf(), sb(b) {}
 protected:
 	///
 	virtual int sync() {
@@ -105,7 +105,7 @@ protected:
 #endif
 	}
 	///
-	virtual std::streamsize xsputn(char const * p, std::streamsize n) {
+	virtual streamsize xsputn(char const * p, streamsize n) {
 #ifdef MODERN_STL
 		return sb->sputn(p, n);
 #else
@@ -122,29 +122,29 @@ protected:
 	}
 private:
 	///
-	std::streambuf * sb;
+	streambuf * sb;
 };
 
 /// So that public parts of DebugStream does not need to know about filebuf
 struct DebugStream::debugstream_internal {
 	/// Used when logging to file.
-	std::filebuf fbuf;
+	filebuf fbuf;
 };
 
 /// Constructor, sets the debug level to t.
 DebugStream::DebugStream(Debug::type t)
-	: std::ostream(new debugbuf(std::cerr.rdbuf())),
+	: ostream(new debugbuf(cerr.rdbuf())),
 	  dt(t), nullstream(new nullbuf), internal(0) {}
 
 	
 /// Constructor, sets the log file to f, and the debug level to t.
 DebugStream::DebugStream(char const * f, Debug::type t)
-	: std::ostream(new debugbuf(std::cerr.rdbuf())),
+	: ostream(new debugbuf(cerr.rdbuf())),
 	  dt(t), nullstream(new nullbuf),
 	  internal(new debugstream_internal)
 {
-	internal->fbuf.open(f, std::ios::out|std::ios::app);
-	delete rdbuf(new teebuf(std::cerr.rdbuf(),
+	internal->fbuf.open(f, ios::out|ios::app);
+	delete rdbuf(new teebuf(cerr.rdbuf(),
 				&internal->fbuf));
 }
 
@@ -165,8 +165,8 @@ void DebugStream::logFile(char const * f)
 	} else {
 		internal = new debugstream_internal;
 	}
-	internal->fbuf.open(f, std::ios::out|std::ios::app);
-	delete rdbuf(new teebuf(std::cerr.rdbuf(),
+	internal->fbuf.open(f, ios::out|ios::app);
+	delete rdbuf(new teebuf(cerr.rdbuf(),
 				&internal->fbuf));
 }
 
@@ -250,12 +250,12 @@ int main(int, char **)
 	// support partial specialization. In egcs this should not be
 	// needed.
 	debugstream << "automatic " << &i 
-		    << ", free store " << p << std::endl;
+		    << ", free store " << p << endl;
 	delete p;
 	/*
 	for (int j = 0; j < 200000; ++j) {
 		DebugStream tmp;
-		tmp << "Test" << std::endl;
+		tmp << "Test" << endl;
 	}
 	*/
 }

src/support/DebugStream.h

@@ -22,6 +22,16 @@
 #include <iostream>
 #endif
 
+#ifdef MODERN_STL
+using std::ostream;
+using std::streambuf;
+using std::streamsize;
+using std::filebuf;
+using std::cerr;
+using std::ios;
+using std::endl; 
+#endif
+
 #ifdef TEST_DEBUGSTREAM
 #include <string>
 struct Debug {
@@ -90,7 +100,7 @@ struct Debug {
     debug[Debug::type(Debug::INFO | Debug::CRIT)] << "...info/crit...\n";
 
 */
-class DebugStream : public std::ostream {
+class DebugStream : public ostream {
 public:
 	/// Constructor, sets the debug level to t.
 	DebugStream(Debug::type t = Debug::NONE);
@@ -136,7 +146,7 @@ public:
 	    current debug level otherwise the real debug stream
 	    is used.
 	*/
-	std::ostream & debug(Debug::type t = Debug::ANY) {
+	ostream & debug(Debug::type t = Debug::ANY) {
 		if (dt & t) return *this;
 		return nullstream;
 	}
@@ -145,14 +155,14 @@ public:
 	/** This is an operator to give a more convenient use:
 	    dbgstream[Debug::INFO] << "Info!\n";
 	*/
-	std::ostream & operator[](Debug::type t) {
+	ostream & operator[](Debug::type t) {
 		return debug(t);
 	}
 private:
 	/// The current debug level
 	Debug::type dt;
 	/// The no-op stream.
-	std::ostream nullstream;
+	ostream nullstream;
 	struct debugstream_internal;
 	debugstream_internal * internal;
 };

src/support/filetools.C

@@ -27,6 +27,7 @@
 #include "FileInfo.h"
 #include "pathstack.h"        // I know it's OS/2 specific (SMiyata)
 #include "gettext.h"
+#include "LAssert.h"
 
 // Which part of this is still necessary? (JMarc).
 #if HAVE_DIRENT_H