remove obsolete file lyxrc.example

git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15832 a592a061-630c-0410-9148-cb99ea01b6c8
2024-11-25 02:49:46 +00:00 · 2006-11-09 17:40:44 +00:00 · 2006-11-09 17:40:44 +00:00 · 6008c8176e
commit 6008c8176e
parent 9d969ec3a4
9 changed files with 33 additions and 670 deletions
--- a/4
+++ b/4
@ -171,8 +171,8 @@ Moreover, the following generic configure flags may be useful:
    installation. [defaults to /usr/local]
  o --datadir=DIRECTORY gives the directory where all extra LyX
-    files (lyxrc example, documentation, templates and layouts
+    files (documentation, templates and layout definitions)
-    definitions) will be installed.
+    will be installed.
    [defaults to ${prefix}/share/lyx${program_suffix}]
  o --bindir=DIRECTORY gives the directory where the lyx binary
--- a/development/scons/scons_manifest.py
+++ b/development/scons/scons_manifest.py
@ -1262,7 +1262,6 @@ src_post_files = Split('''
 lib_files = Split('''
    lyxrc.example
    CREDITS
    chkconfig.ltx
    external_templates
--- a/lib/Makefile.am
+++ b/lib/Makefile.am
@ -4,7 +4,7 @@ SUBDIRS = doc lyx2lyx
 CHMOD = chmod
-dist_pkgdata_DATA = lyxrc.example CREDITS chkconfig.ltx \
+dist_pkgdata_DATA = CREDITS chkconfig.ltx \
 	       external_templates encodings languages symbols syntax.default
 # Note that we "chmod 755" manually this file in install-data-hook.
--- a/lib/doc/Customization.lyx
+++ b/lib/doc/Customization.lyx
@ -1,4 +1,4 @@
-#LyX 1.4.3svn created this file. For more info see http://www.lyx.org/
+#LyX 1.4.3 created this file. For more info see http://www.lyx.org/
 \lyxformat 245
 \begin_document
 \begin_header
@ -532,17 +532,6 @@ languages
 this file contains a list of all the languages currently supported by LyX.
 \end_layout
 \begin_layout List
 \labelwidthstring 00.00.0000
 \family typewriter
 lyxrc.example
 \family default
 Deprecated and definitely obfuscated.
 This is the old style preferences file.
 It will probably disappear in the near future.
 \end_layout
 \begin_layout Section
 Your local configuration directory
 \end_layout
--- a/lib/doc/de_Customization.lyx
+++ b/lib/doc/de_Customization.lyx
@ -1,4 +1,4 @@
-#LyX 1.4.2 created this file. For more info see http://www.lyx.org/
+#LyX 1.4.3 created this file. For more info see http://www.lyx.org/
 \lyxformat 245
 \begin_document
 \begin_header
@ -648,15 +648,6 @@ languages
 Eine Liste mit allen derzeit von LyX unterstützten Sprachen.
 \end_layout
 \begin_layout List
 \labelwidthstring 00.00.0000
 \family typewriter
 lyxrc.example
 \family default
 Veraltet.
 \end_layout
 \begin_layout Section
 Das lokale Konfigurationsverzeichnis
 \end_layout
--- a/lib/doc/eu_Customization.lyx
+++ b/lib/doc/eu_Customization.lyx
@ -1,4 +1,4 @@
-#LyX 1.4.0cvs created this file. For more info see http://www.lyx.org/
+#LyX 1.4.3 created this file. For more info see http://www.lyx.org/
 \lyxformat 245
 \begin_document
 \begin_header
@ -524,17 +524,6 @@ languages
 dauka.
 \end_layout
 \begin_layout Labeling
 \labelwidthstring 00.00.0000
 \family typewriter
 lyxrc.example
 \family default
 Hau erabat zaharkituta dago, garai bateko hobespenenetarako fitxategia
 zen.
 Laster desagertuko da, hurrean.
 \end_layout
 \begin_layout Section
 Zure konfigurazio lokaleko direktorioa
 \end_layout
@ -2623,6 +2612,7 @@ status inlined
 \begin_layout Standard
 \backslash
 begin{sloppypar}
 \end_layout
@ -2756,6 +2746,7 @@ status inlined
 \begin_layout Standard
 \backslash
 end{sloppypar}
 \end_layout
@ -3071,6 +3062,7 @@ status inlined
 \begin_layout Standard
 \backslash
 b o
 \end_layout
@ -3095,6 +3087,7 @@ status inlined
 \begin_layout Standard
 \backslash
 d o
 \end_layout
@ -3127,6 +3120,7 @@ status inlined
 \begin_layout Standard
 \backslash
 t o
 \end_layout
@ -3146,6 +3140,7 @@ status inlined
 \begin_layout Standard
 \backslash
 u o
 \end_layout
@ -3188,6 +3183,7 @@ status inlined
 \begin_layout Standard
 \backslash
 .s
 \end_layout
@ -4505,6 +4501,7 @@ DeclareLaTeXClass[report,
 status collapsed
 \begin_layout Standard
 {}
 \end_layout
@ -4817,6 +4814,7 @@ status inlined
 \begin_layout Standard
 \backslash
 begin{sloppypar}
 \end_layout
@ -5210,6 +5208,7 @@ status inlined
 \begin_layout Standard
 \backslash
 end{sloppypar}
 \end_layout
@ -5332,6 +5331,7 @@ status inlined
 \begin_layout Standard
 \backslash
 begin{sloppypar}
 \end_layout
@ -6294,6 +6294,7 @@ status inlined
 \begin_layout Standard
 \backslash
 end{sloppypar}
 \end_layout
--- a/lib/doc/fr_Customization.lyx
+++ b/lib/doc/fr_Customization.lyx
@ -1,4 +1,4 @@
-#LyX 1.4.3svn created this file. For more info see http://www.lyx.org/
+#LyX 1.4.3 created this file. For more info see http://www.lyx.org/
 \lyxformat 245
 \begin_document
 \begin_header
@ -590,17 +590,6 @@ languages
 contient la liste de toutes les langues actuellement supportées par LyX.
 \end_layout
 \begin_layout List
 \labelwidthstring 00.00.0000
 \family typewriter
 lyxrc.example
 \family default
 définitivement périmé.
 C'est l'ancien type de fichier de préférences.
 Il disparaîtra sans doute prochainement.
 \end_layout
 \begin_layout Section
 Votre répertoire personnel de configuration
 \end_layout
--- a/lib/doc/it_Customization.lyx
+++ b/lib/doc/it_Customization.lyx
@ -1,4 +1,4 @@
-#LyX 1.4.0cvs created this file. For more info see http://www.lyx.org/
+#LyX 1.4.3 created this file. For more info see http://www.lyx.org/
 \lyxformat 245
 \begin_document
 \begin_header
@ -664,17 +664,6 @@ language
 da LyX.
 \end_layout
 \begin_layout List
 \labelwidthstring 00.00.0000
 \family typewriter
 lyxrc.example
 \family default
 Deprecato e definitivamente abbandonato.
 Questo è il vecchio file di preferenze di LyX.
 Probabilmente scomparirà nel prossimo futuro.
 \end_layout
 \begin_layout Section
 \size larger
@ -2075,6 +2064,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 -
 \end_layout
@ -3621,6 +3611,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 begin{sloppypar}
 \end_layout
@ -3702,6 +3693,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 end{sloppypar}
 \end_layout
@ -3784,6 +3776,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 begin{sloppypar}
 \end_layout
@ -3922,6 +3915,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 end{sloppypar}
 \end_layout
@ -4238,6 +4232,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 b o
 \end_layout
@ -4262,6 +4257,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 d o
 \end_layout
@ -4303,6 +4299,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 u o
 \end_layout
@ -4345,6 +4342,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 .s
 \end_layout
@ -6276,6 +6274,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 begin{sloppypar}
 \end_layout
@ -6618,6 +6617,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 end{sloppypar}
 \end_layout
@ -6764,6 +6764,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 begin{sloppypar}
 \end_layout
@ -7818,6 +7819,7 @@ status collapsed
 \begin_layout Standard
 \backslash
 end{sloppypar}
 \end_layout
--- a/lib/lyxrc.example
+++ b/lib/lyxrc.example
@ -1,608 +0,0 @@
 # -*- text -*-
 # file lyxrc.example
 # This file is part of LyX, the document processor.
 # Licence details can be found in the file COPYING.
 # author Lars Gullik Bjønnes
 # author Jean-Marc Lasgouttes
 # author José Matos
 # author Asger Alstrup Nielsen
 # author Ed Scott
 # author Lior Silberman
 # author Dekel Tsur
 # Full author contact details are available in file CREDITS.
 # The file lyxrc.example is a template to write your own lyxrc file.
 # If you copy/rename it to lyxrc in the current directory, it will
 # give global options for all LyX users. It is also possible to copy
 # this file to $HOME/.lyx/lyxrc so that the configuration applies to a
 # particular user.
 #
 # Several of these settings have defaults that are auto-detected when you use
 # the menu option Options->Reconfigure.  You can see their value by looking at
 # the file $HOME/.lyx/lyxrc.defaults. Any setting in this file will override
 # the defaults.
 #
 # BIND SECTION ###########################################################
 #
 # Before defining your own key-bindings, select one of the available default
 # binding sets. These are resource files (like this one) that define a
 # large set of (keyboard) bindings. These files live in bind directory of
 # the LyX system directory and have in general the .bind suffix.
 # Currently, you can choose from the following flavors:
 #
 # cua.bind            for Windows-, Mac- and Motif-like bindings
 # emacs.bind          for Emacs-like bindings.
 #
 # The \bind_file command looks in the LyX bind directory for a file
 # of the given name, but a full path can also be given. If you have
 # a bind file in your ~/.lyx/bind/ directory, it will be preferred
 # over a system wide bind file. Default is `cua'.
 #\bind_file cua
 #\bind_file emacs
 # Based on the default, you can now change part or all of it with the
 # \bind command. For example, when you want the delete key to do the
 # backspace action, uncomment the following line:
 #\bind "Delete" "delete-backward"
 # However, if you're not at all happy with the default bindings,
 # the most logical thing to do would be to use one of the system
 # wide bind files as a template and place your own version in
 # ~/.lyx/bind/mine_is_best.bind and change the above \bind_file
 # to this instead:
 #\bind_file mine_is_best
 # By default, LyX takes over the handling of the dead keys (or accent
 # keys) that may be defined for your keyboard. While this allows you
 # to enter characters that would not be normally available, some
 # people dislike the different behaviour. You can use raw dead keys by
 # just uncommenting the next line
 #\override_x_deadkeys false
 # Tip: Use "lyx -dbg 4" to survey how LyX interprets your keybindings.
 #
 # MISC SECTION ###########################################################
 #
 # Set this to false if you don't want the startup banner.
 # Default is true.
 #\show_banner true
 # Set to false if you don't want the current selection to be replaced
 # automatically by what you type. Default is true.
 #\auto_region_delete false
 # This is the time interval between auto-saves (in seconds).
 # 0 means no auto-save, default is 300 for five minutes.
 #\autosave 600
 # LyX asks for a second confirmation to exit if you exit with changed
 # documents that you don't want to save.  You can turn this confirmation off
 # (LyX will still ask to save changed documents) with the following line.
 # We recommend to keep the confirmation, though.
 #\exit_confirmation false
 # This sets the behaviour if you want to be asked for a filename when
 # creating a new document or wait until you save it and be asked then.
 # The default for now is ask on save.
 # \new_ask_filename false
 # LyX continously displays names of last command executed, along with a list
 # of defined short-cuts for it in the minibuffer.
 # It requires some horsepower to function, so you can turn it off, if LyX
 # seems slow to you, by uncommenting this line:
 #\display_shortcuts false
 # \view_dvi_paper_option allows to specify a paper option to the dvi
 # viewer. By default LyX specifies the paper size of the document to
 # the dvi viewer via the command line option -paper size, where size
 # is one of "us","letter","a3","a4" and so on. The command
 # \view_dvi_paper_option allows the user to overwrite the name of the
 # command line flag, i.e. replace -paper with something else. If
 # specified and left empty, i.e. \view_dvi_paper_option "", LyX does
 # not append the -paper option to the dvi command at all. This case is
 # especially useful when viewing your documents on Windows with yap,
 # because yap does not allow a command line option for the paper size.
 #\view_dvi_paper_option ""
 # LyX assumes that the default papersize should be usletter.  If this is not
 # true for your site, use the next line to specify usletter, legal,
 # executive, a3, a4, a5, or b5 as the default papersize.
 #\default_papersize "a4"
 # Define which program to use to run "chktex".
 # You should include options that turn different warnings on and off.
 # Default is "chktex -n1 -n3 -n6 -n9 -n22 -n25 -n30 -n38"
 # Check the ChkTeX documentation for info on what the flags mean.
 # Example: use this to ignore warnings about using "\ldots" instead of "..."
 #\chktex_command "chktex -n11 -n1 -n3 -n6 -n9 -22 -n25 -n30 -n38"
 # Keyboard Mapping. Use this to set the correct mapping file for your
 # keyboard, that is if you need one. You'll need one if you for instance
 # want to type German documents on an American keyboard. In that case,
 # uncomment these three lines:
 #\kbmap true
 #\kbmap_primary german
 #\kbmap_secondary american
 # The following keyboards are supported: american, czech, francais,
 # french, german, german-2, magyar, magyar-2, portuges, romanian,
 # slovak, slovene, transilvanian, turkish and turkish-f. Check
 # the lib/kbd directory if you want to write support for your language.
 # If you do, please submit it to lyx-devel@lists.lyx.org.
 # The Pause button is defined to be a three-way switch between primary
 # keyboard, secondary keyboard, and no keyboard mapping with the
 # following command. It is useful if you want to write in a language
 # not directly supported by your keyboard and you have defined a
 # custom keyboard mapping above.
 #\bind "Pause" "keymap-toggle"
 # This starts the lyxserver. The pipes get an additional extension
 # '.in' and '.out'. Only for advanced users.
 # \serverpipe "/home/chb/.lyxpipe"
 # Default format string for the date-insert command
 #
 # This accepts the normal strftime formats; see man strftime for full
 # details of the format.
 #
 #\date_insert_format "%A, %e. %B %Y"
 # Maximum number of words in the initialization string for a new label.
 # If it is set to 0, then the init. string will only contain the prefix
 # (e.g. "sec:"). If it is set to -1, the init. string will be empty.
 # This feature is disabled in 1.1.6.
 #
 #\label_init_length 0
 #
 # SCREEN & FONTS SECTION #################################################
 #
 # DPI (dots per inch) of your monitor is auto-detected by LyX. If that goes
 # wrong, you can override the setting here:
 #\screen_dpi 100
 # The zoom percentage for screen fonts.
 # A setting of 100% will make the fonts roughly the same size as on paper.
 # However, since a screen is wider than a piece of paper, the default setting
 # is 150%.
 #\screen_zoom 100
 # LyX normally doesn't update the cursor position if you move the scrollbar.
 # If you scroll the cursor off the screen and then start typing LyX will
 # move you back to where the cursor was. If you'd prefer to always have the
 # cursor on screen, bounded by the topmost and bottommost visible lines
 # -- much like XEmacs for example -- then uncomment the next line.
 #\cursor_follows_scrollbar true
 # The screen fonts used to display the text while editing
 # The defaults are:
 #\screen_font_roman "-*-times"
 #\screen_font_sans "-*-helvetica"
 #\screen_font_typewriter "-*-courier"
 # For some, this font looks better:
 #\screen_font_roman "-*-utopia"
 # Allow the use of scalable screen fonts? Default is true.
 # If you choose "false", LyX will use the closest existing size for a match.
 # Use this if the scalable fonts look bad and you have many fixed size fonts.
 #\screen_font_scalable false
 # Tip: Run lyx as "lyx -dbg 512" to learn which fonts are used.
 # The norm for the screen fonts. The default is iso8859-1, which is
 # the same as what LaTeX calls latin1.
 #\screen_font_encoding iso8859-2
 # The norm for the popup fonts. The default is an empty string, which
 # causes to use the screen fonts norm (defined by \screen_font_encoding).
 #\popup_font_encoding iso8859-2
 # The normal font for popups. It is set to
 #    <font_popup>-*-*-*-?-*-*-*-*-<font_encoding>.
 # The default  is:
 #\popup_font_name "-*-helvetica-medium-r"
 # The bold font for popups. It is set to
 #    <font_menu>-*-*-*-?-*-*-*-*-<font_encoding>.
 # The default  is:
 #\popup_bold_font "-*-helvetica-bold-r"
 # The font sizes used for calculating the scaling of the screen fonts.
 # You should only have to change these if the fonts on your screen look bad,
 # in which case you can fine tune the font selection size by size. LyX selects
 # font size according to this table, the monitor DPI setting and the current
 # zoom setting.
 # The format is:
 #\screen_font_sizes tiny smallest smaller small normal large larger largest huge huger
 #
 # This is the default in LyX (exactly what LaTeX does):
 #\screen_font_sizes 5.0 7.0 8.0 9.0 10.0 12.0 14.4 17.28 20.74 24.88
 # To change the colors for footnotes:
 #\set_color footnote green
 # for mathed you may also want to change the coloring of lines and brackets:
 #\set_color math yellow
 #\set_color mathlines yellow
 #
 # UI SECTION ########################################################
 #
 # Choose your UI (user interface) definition here. The .ui files are in the
 # directory "lib/ui" and contains the definition of the menu and the toolbar.
 #\ui_file "default"
 #
 # PRINTER SECTION ########################################################
 #
 # The default printer to print on. If none is specified, LyX will use
 # the environment variable PRINTER. If that fails, the default is empty.
 #\printer ""
 # If you have setup (as we recommend you to do) your print program
 # (e.g. dvips) to take advantage of the particularities of the various
 # printers you have access to, then you should set the following to
 # true. Then LyX will pass the name of the destination printer to your
 # print command.
 # The default is false, because we have unfortunately to cope with
 # people who refuse to take the time to configure their system.
 # Note that you will probably have to change \print_spool_command below.
 #\print_adapt_output true
 # If you don't use dvips, you may specify your favorite print program
 # here. See other options at the end of this section to adapt LyX to
 # your print program.
 #\print_command dvips
 # Extra options to pass to printing program after everything
 # else, but before the filename of the DVI file to be printed.
 #\print_extra_options ""
 # When set, this printer option automatically prints to a file
 # and then calls a separate print spooling program on that file
 # with the given name and arguments.
 # This is set by default to 'lp' or 'lpr', depending on what your
 # system uses.
 # Set this to "" if you have set up dvips so that it sends
 # output to the right printer (remember to also use \print_adapt_output).
 #\print_spool_command ""
 # If you specify a printer name in the print dialog,
 # the following argument is prepended along with the printer name
 # after the spool command. The default is autodetected, along with
 # \print_spool_command determination.
 #\print_spool_printerprefix ""
 # Other print related options
 # The following options are only of interest to people who do not
 # use dvips as print command. You may safely skip to the end of this
 # section otherwise.
 # These specify the options to pass to the printer program to select the
 # corresponding features. These default to the options used for the dvips
 # program. Look at the man page for your favorite print program to learn
 # which options to use.
 # Normally you don't need to change this unless you use something other
 # than dvips.
 #\print_evenpage_flag -B
 #\print_oddpage_flag -A
 #\print_reverse_flag -r
 #\print_landscape_flag "-t landscape"
 #\print_pagerange_flag -pp
 #\print_copies_flag -c
 #\print_collcopies_flag -C
 #\print_paper_flag -t
 #\print_paper_dimension_flag -T
 # Option to pass to the print program to print on a specific printer.
 #\print_to_printer -P
 # Option to pass to the print program to print to a file.
 #\print_to_file -o
 # Extension of printer program output file. Usually .ps
 #\print_file_extension .ps
 # Sample configuration to use with dvilj4 for a HP Laserjet IV (or
 # better) printer [provided by Reuben Thomas <rrt@sc3d.org>]:
 #\print_command dvilj4
 #\print_extra_options -q
 #\print_evenpage_flag "-D2 -r"
 #\print_oddpage_flag -D1
 #\print_reverse_flag -r
 #\print_landscape_flag -l
 #\print_pagerange_flag -p
 #\print_to_file -e
 #\print_file_extension .lj
 #\print_copies_flag -c
 #\print_collcopies_flag -c
 #\print_adapt_output false
 #
 # EXPORT SECTION ########################################################
 #
 # The \converter command defines a converter between two formats.
 # LyX uses the defined converters for generating output in various formats,
 # or for importing.
 # The converter command has 4 arguments: The source format, the target format,
 # the command, and additional flags.
 # For example, the following defines a DVI->Postscript converter:
 #\converter dvi ps "dvips -o $$o $$i" ""
 # The variable name $$i is replaced with the name of the source file,
 # and $$o is replaced with the name of the target file.
 # The flags argument is a list of comma separated flags.
 # Known flags are
 # - * : copy the previously defined flags
 # - latex : The converter is latex or its derivatives (pdflatex).
 # - originaldir : The converter must be invoked in the directory of the lyx
 #   file and not in the temporary directory. This is needed for tex->html
 #   converters in order to be able to read the eps files.
 # - needaux : The converted uses the .aux file, so we need to call latex
 #   before running the converter.
 # - resultdir=dir : The converter put all the files in dir.
 #   Using "resultdir" is same as "resultdir=$$b".
 #   Note: When exporting, the whole directory will be moved from the temporary
 #   directory to the target directory.
 # - resultfile=file : Name of main file in the result directory, for example
 #  "index.html" or "$$b.html"
 #   If "resultfile" is omitted, the name of this file is assumed to be
 #   "index.format"
 # - parselog=filtername : filtername is a name of a filter command that takes
 #   the converter error log (from stderr), and converts it to a fake latex .log
 #   file.
 # For example:
 #\converter latex html "latex2html -split 0 $$i"
 #           "originaldir,needaux,resultdir"
 #
 # For literate programming, use something like
 #\converter literate latex "noweave -delay -index $$i >$$o"
 #                          "parselog=listerrors g"
 #\converter literate program "build-script $$i"
 #                            "originaldir,parselog=listerrors g"
 # The format command is used to define file formats. It has 4 arguments:
 # the format name, the extension, and "pretty name" and menu shortcut.
 # For example
 #\Format latex tex LaTeX L
 # The \viewer command is used to define viewers for new formats,
 # or to change the already defined viewers.
 # For example, to use xdvi as the viewer to dvi files use
 #\viewer dvi "xdvi"
 # It can get more involved. Expert users might prefer something like:
 #\viewer dvi "xdvi -s 2 -expert -geometry 1014x720+0+0 -keep -margins 1.5"
 #
 # TEX SECTION  ###########################################################
 #
 # The font encoding used for the LaTeX2e fontenc package.
 # T1 is highly recommended for non-English languages. LyX uses T1 as a
 # default if you have the ec fonts installed on your system.
 #\font_encoding T1
 # Choose "default" if T1 doesn't work for you for some reason:
 #\font_encoding default
 #
 # FILE SECTION  ##########################################################
 #
 # The default path for your documents.
 # Default is $HOME
 #\document_path ~/Documents/
 # The file where the last-files information should be stored.
 # Default is ~/.lyx/lastfiles
 #\lastfiles ~/.lyx_lastfiles
 # Maximal number of lastfiles. Up to nine can appear in the file menu.
 # Default is four.
 #\num_lastfiles 9
 # Flag telling whether the lastfiles should be checked for existence.
 # Files that does not exist are left out of the lastfiles entries.
 # Default is true. If you use slow or removable media, such as networks
 # or floppy disks, you can speed up the starting time of LyX by disabling
 # this feature.
 #\check_lastfiles false
 # The path that LyX will set when offering you to choose a template.
 # Default is (System LyX dir)/templates
 #\template_path ~/.lyx/templates
 # The path that LyX will use to put temporary TeX outputs.
 # Default is /tmp/<unique directory for each instance of LyX>
 # containing <unique subdirectory for each buffer>
 # If you set it, it will be /directory/<unique subdirectory for each buffer>
 # (unless set to /tmp).
 #\tempdir_path /usr/tmp
 # If you set this flag, LyX will always use a temporary directory
 # to put TeX outputs into. It is enabled by default.
 # This directory is deleted when you quit LyX.
 # You might want to avoid using a temporary directory in several
 # cases:
 # - LaTeX cannot find some files it needs;
 # - you have a large number of include files, and you get messages
 #   saying that some LaTeX buffers overflow.
 # Note that, even if tell LyX not to use a temporary directory, there
 # will be cases where it will be forced to: this happens for example
 # when typesetting a file in a read-only directory (documentation).
 #\use_tempdir false
 # This is the maximum line length of an exported ASCII file (LaTeX,
 # SGML or plain text). Default is 75.
 #\ascii_linelen 80
 # Set to false if you don't want LyX to create backup files.
 # Default is true.
 #\make_backup true
 # The path for storing backup files. If it is the empty string, LyX will
 # store the backup file in the same directory of the original file.
 # Default is "".
 #\backupdir_path "~/Desktop/Trash/"
 #
 # ASCII EXPORT SECTION ###################################################
 #
 # The following entry can be used to define an external program to
 # render tables in the ASCII output. If you specify "none", a simple
 # internal routine is used. The default is auto-detected.
 # The following line will use groff and output using latin-1 encoding
 # (here $$FName is the input file and the output goes to stdout):
 #\ascii_roff_command "groff -t -Tlatin1 $$FName"
 #
 # SPELLCHECKER SECTION ####################################################
 #
 # What command runs the spellchecker? Default is "ispell" if it is
 # installed, "none" otherwise.
 # If you have aspell (http://metalab.unc.edu/kevina/aspell/)
 # installed and configured, you might want to uncomment the line below.
 #\spell_command aspell
 # Consider run-together words, such as "notthe" for "not the", as legal
 # words? Default is false.
 #\accept_compound true
 # Specify an alternate language. The default is to use the language of
 # document. Uncomment both to enable.
 #\use_alt_language true
 #\alternate_language dansk
 # Specify additional chars that can be part of a word.
 #\use_escape_chars true
 #\escape_chars "æøåÆØÅ"
 # Specify an alternate personal dictionary file. If the file name does not
 # begin with "/", $HOME is prefixed. The default is to search for a personal
 # dictionary in both the current directory and $HOME, creating one in $HOME
 # if none is found. The preferred name is constructed by appending ".ispell_"
 # to the base name of the hash file. For example, if you use the English
 # dictionary, your personal dictionary would be named ".ispell_english".
 #\use_personal_dictionary true
 #\personal_dictionary .ispell_dansk
 # Specify whether to pass the -T input encoding option to ispell (only if the
 # language is different than "default".) Enable this if you can't spellcheck
 # words with international letters in them. There have been reports that this
 # does not work with all dictionaries, so this is disabled by default.
 #\use_input_encoding true
 #
 # LANGUAGE SUPPORT SECTION ####################################################
 #
 # Set to true to enable support of right-to-left languages (e.g. Hebrew,
 # Arabic). Default is false.
 #\rtl true
 # The latex command for loading the language package.
 # Default is \usepackage{babel}.
 #\language_package "\usepackage{omega}"
 # The latex command for changing the from the language of the document
 # to another language. $$lang is substituted by the name of the second
 # language. Default is \selectlanguage{$$lang}.
 #\language_command_begin "\begin{otherlanguage}{$$lang}"
 # The latex command for changing back the language to the language of
 # the document. Default is \selectlanguage{$$lang}.
 #\language_command_end "\end{otherlanguage}"
 # Set to false if a language switching command is needed at the beginning of
 # the document. Default is true.
 #\language_auto_begin false
 # Set to false if a language switching command is needed at the end of
 # the document. Default is true.
 #\language_auto_end false
 # Set mark_foreign_language to "false" to disable the highlighting of words
 # with a foreign language to the language of the documet.
 # Default is "true"
 #\mark_foreign_language false
 # It is possible to bind keys for changing the language inside a document.
 # For example, the following command will cause F12 to switch between French
 # and English in a French document, and in a document of other language it will
 # switch between that language and French.
 #\bind "F12" "language french"
 #
 # HEBREW SUPPORT SECTION ####################################################
 #
 # To enable the Hebrew support, uncommnet the following lines:
 #\rtl true
 #\kbmap true
 #\kbmap_primary null
 #\kbmap_secondary hebrew
 #\converter tex dvi elatex ""
 #\converter tex pdf pdfelatex ""
 #\font_encoding default
 # You also need to bind a key for switching between Hebrew and English.
 # For example,
 #\bind "F12" "language hebrew"
 # You might want ot disable the foreign language marking:
 #\mark_foreign_language false
 # Finally, you need to select iso8859-8 font encoding, and select screen fonts
 # (below are the default fonts. You need to replace them by Hebrew fonts)
 #\screen_font_encoding iso8859-8
 #\screen_font_roman "-*-times"
 #\screen_font_sans "-*-helvetica"
 #\screen_font_typewriter "-*-courier"
 #\screen_font_popup "-*-helvetica-medium-r"
 #\screen_font_menu "-*-helvetica-bold-r"
 #
 # ARABIC SUPPORT SECTION ####################################################
 #
 # To enable the Arabic support, uncommnet the following lines:
 #\rtl true
 #\kbmap true
 #\kbmap_primary null
 #\kbmap_secondary arabic
 # You also need to bind a key for switching between Arabic and English.
 # For example,
 #\bind "F12" "language arabic"
 # If you use arabtex, uncomment the following lines
 #\language_auto_begin false
 #\language_auto_end false
 #\language_command_begin "\begin{arabtext}"
 #\language_command_end "\end{arabtext}"
 #\language_package "\usepackage{arabtex,iso88596}\setcode{iso8859-6}"
 # Finally, you need to select iso8859-6.8x font encoding,
 # and select screen fonts.
 # iso8859-6.8x fonts can be found at
 #   http://www.langbox.com/AraMosaic/mozilla/fontXFE/
 #\screen_font_encoding iso8859-6.8x
 #\screen_font_encoding_menu iso8859-1
 #\screen_font_roman "-*-naskhi"