- perform updateLabels also after dissolving an empty inset (bug 6003).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30771 a592a061-630c-0410-9148-cb99ea01b6c8
This patch makes sure that there are minimal changes when loading and saving a file with change tracking.
- the authors are assigned a buffer_id, such that when the file is saved, they get the same id,
- the authorlist is sorted according to the buffer_id,
- the buffer_id is written to the file in the author list (file format change)
- the ids start with 1, because 0 is internally reserved for the current Author,
- when writing the file, the current author is assigned an id if he didn't already have it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30756 a592a061-630c-0410-9148-cb99ea01b6c8
accepting changes in a clipboard copy (CutAndPaste.cpp), we set the buffer
of insets (and we reset them later).
Doing this makes sense because we know this is the only operation on these
out-of-document paragraphs that will require access to a buffer.
Also, this commit gets rid of one explicit test against ERT_CODE and
LISTING_CODE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30623 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, insets in cut stack do not have a buffer, and therefore cannot
acess to buffer parameters. What is annoying here is that acceptChanges
requires this buffer params only to be able to read a font in moveItem,
in order to read the buffer language, and I doubt this is really needed...
Another change in this patch is that Inset::getLayout now returns a
plainLayout when the inset does not have a buffer_. This fixes a remaining
crash where dEPM reads isFreeSpacing() for an inset in the clipboard, but
this looks like a fragile situation. And it will not do the right thing when
doing depm in a freespacing inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30605 a592a061-630c-0410-9148-cb99ea01b6c8
* allows the selection of a whole cell with shift+key
* shift-movement between empty cells with a single keystroke
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28385 a592a061-630c-0410-9148-cb99ea01b6c8
- constify some parameters
- getFontSettings():
- getFirstFontSettings(): return a const ref instead of a copy. This brings a consistent 4% improvement in LateX generation. Might speedup rtl handling too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26957 a592a061-630c-0410-9148-cb99ea01b6c8
* src/TextClass.h[.cpp]: add addLayoutIfNeeded() and createDefaultLayout()
* src/Layout.h[.cpp]: add unknown_ to mark if a layout is a default layout for an unknown one.
* src/LayoutFile.cpp: add addDefaultClass and change addLayoutFile to addLocalLayout.
* src/Text.cpp: add unknown layouts that are not recognizable by a new textclass.
* src/frontends/qt4/GuiToolbar.cpp: display (unknown) for unknown layouts.
* src/frontends/qt4/GuiDocument.cpp: restore 'browse layout' button.
* src/frontends/qt4/ui/LaTeXUi.ui: restore 'browse layout' button.
* src/CutAndPaste.cpp: do not convert unknown layouts from pasted text
* src/BufferParams.cpp: add a default textclass when a document with unknown textclass is loaded.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25555 a592a061-630c-0410-9148-cb99ea01b6c8
* development/MacOSX/lyxrc.dist.in: new variable mac_like_word_movement,
set to true on Mac OS X. There is no GUI for it now.
* src/Paragraph.cpp (isSpace): new method
(isChar): return false for a space.
* src/Text.cpp (cursorForwardOneWord, cursorBackWardOneWord): implement
mac-like cursor movement.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25413 a592a061-630c-0410-9148-cb99ea01b6c8
* Paragraph.cpp (isChar): new method; returns true when pointer is on
a character that is not a letter. Note that a footnote inset, for
example is neither a letter nor a character.
* Text.cpp (cursorForwardOneWord, cursorBackwardOneWord): rewrite by
using 3 character categories: letters, characters and others.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25373 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- file format change to 324
* development/FORMAT:
- document file format change
* src/insets/InsetNewline.{cpp,h}:
- the former two separate derivates are now merged into one inset
with proper Params and Mailer. This simplifies the structure and allows for
switching between the two kinds.
* src/Text3.cpp:
- The newline insets are now being generated with
newline-insert [newline|linebreak]
* src/factory.cpp:
* src/Text.cpp:
- Newline inset is now a proper inset with opening and closing tag.
* src/FuncCode.h:
* src/LyXAction.cpp:
* src/Text3.cpp:
* src/insets/InsetCollapsable.cpp:
* src/insets/InsetTabular.cpp:
* src/mathed/InsetMathGrid.cpp:
* src/mathed/InsetMathHull.cpp:
- remove LFUN_NEW_LINE, LFUN_LINE_BREAK,
add LFUN_NEWLINE_INSERT
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_6.py:
- conversion and reversion routines for newline insets.
* lib/ui/stdmenus.inc:
* lib/ui/stdcontext.inc
- adapt menu and add context menu to switch between newpage variants.
* lib/bind/*.bind:
- adapt to new lfuns.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23966 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- file format change to 323
* development/FORMAT:
- document file format change
* src/insets/InsetNewpage.cpp:
- the former four separate derivates are now merged into one inset
with proper Params and Mailer. This simplifies the structure and allows for
switching between the various kinds.
* factory.cpp:
- The newpage insets are now being generated with
newpage-insert [newpage|pagebreak|clearpage|cleardoublepage]
* src/Text.cpp:
- Newpage inset is now a proper inset with opening and closing tag.
* src/FuncCode.h:
* src/LyXAction.cpp:
* src/Text3.cpp:
* src/insets/InsetCollapsable.cpp:
- remove LFUN_PAGEBREAK_INSERT, LFUN_CLEARPAGE_INSERT
and LFUN_CLEARDOUBLEPAGE_INSERT
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_6.py:
- conversion and reversion routines for newpage insets.
* lib/ui/stdmenus.inc:
- adapt menu and add context menu to switch between newpage variants.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23942 a592a061-630c-0410-9148-cb99ea01b6c8
The need for a LayoutPtr arises from the fact that (a) we do not want to give our clients a Layout &, since we do not want them to be able to change our Layout; but (b) we also need to be able to change which layout is ours. So we cannot store a Layout const &. Or so it seems to the compiler.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23522 a592a061-630c-0410-9148-cb99ea01b6c8
dependent, we need the buffer pointer. In fact we already have a
pointer to the text inset. So as soon as inset know their buffer we
can easily switch to a buffer local word list.
* there might be missing some more places to update the words from a
buffer, like for example after backspace or more important when the
cursor leaves a paragraph.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23244 a592a061-630c-0410-9148-cb99ea01b6c8
Sorry, Andre, but this broke not only the modules stuff but the general handling of TextClasses. I'm not opposed to doing this sort of thing, but it's going to be a little more complicated. I'll do it when I get a bit of time, or I can explain what the issue is here if you want to do it.
I'll separately re-commit some of the cleanup here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23189 a592a061-630c-0410-9148-cb99ea01b6c8
Also a few cosmetical changes where I xould not resist.
Would be nice if the 'modules people' could verify that their baby
is strill alive...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23154 a592a061-630c-0410-9148-cb99ea01b6c8
* completion support for mathed
* experimental completion support for text
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23104 a592a061-630c-0410-9148-cb99ea01b6c8
So, when we have an older LyX file, it will look like this:
\begin_inset ERT
status open
\begin_layout Standard
this that
\end_layout
\end_inset
which is now invalid, because ERT uses only PlainLayout. So I had put some code into Text::readParToken, where the layout for a paragraph gets set as it is read:
if (par.forceEmptyLayout()) {
// in this case only the empty layout is allowed
layoutname = tclass.emptyLayoutName();
} else if (par.useEmptyLayout()) {
// in this case, default layout maps to empty layout
if (layoutname == tclass.defaultLayoutName())
layoutname = tclass.emptyLayoutName();
} else {
// otherwise, the empty layout maps to the default
if (layoutname == tclass.emptyLayoutName())
layoutname = tclass.defaultLayoutName();
}
This turns out not to work, because par.forceEmptyLayout() and par.useEmptyLayout() always return false here, because par.inInset() always returns a null pointer, because the paragraph's inset hasn't yet been set when Text::readParagraph() gets called from Text::read() gets called from InsetText::read(). The solution is to set the paragraph's inset when it is created, which means passing a pointer to the various read() routines along the way.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23057 a592a061-630c-0410-9148-cb99ea01b6c8
from the one posted to the list.
The basic idea has two parts. First, we hard code an "empty layout"
(called PlainLayout, for want of a better name) in TextClass and read it
before doing anything else. It can therefore be customized by classes,
if they want---say, to make it left-aligned. Second, InsetText's are
divided into three types: (i) normal ones, that use the "default" layout
defined by the text class; (ii) highly restrictive ones, such as ERT and
(not quite an inset) table cells, which demand the empty layout; (iii)
middling ones, which default to an empty layout and use the empty layout
in place of the default. (This is so we don't get the same problem we
had with ERT in e.g. footnotes.) The type of inset is signaled by new
methods InsetText::forceEmptyLayout() and InsetText::useEmptyLayout().
(The latter might better be called: useEmptyLayoutInsteadOfDefault(),
but that's silly.) The old InsetText::forceDefaultParagraphs() has been
split into these, plus a new method InsetText::allowParagraphCustomization().
A lot of the changes just adapt to this change.
The other big change is in GuiToolbar: We want to show LyXDefault and
the "default" layout only when they're active.
There are a handful of places where I'm not entirely sure whether we
should be using forceEmptyLayout or !allowParagraphCustomization() or
both. The InsetCaption is one of these. These places, and some others,
are marked with FIXMEs, so I'd appreciate it if people would search
through the patch and let me know whether these need changing. If they
don't, the FIXMEs can be deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22966 a592a061-630c-0410-9148-cb99ea01b6c8
already set.
* src/Paragraph.cpp (changeCase): make sure to update the selection
as needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22695 a592a061-630c-0410-9148-cb99ea01b6c8
avoidable ~5% overhead when loading the UserGuide. This is an attempt on
rectifying the situation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22532 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Cursor.cpp (selHandle):
- handle mark()
* src/Text.cpp (dissolveInset):
- switch mark off before using selHandle, just in case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22204 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
- tex2lyx support
- rename LFUN_BREAK_LINE to LFUN_NEW_LINE because this is what the lfun does and to avoid confusions
- new menu entry
- new shortcut C-S-Return
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21778 a592a061-630c-0410-9148-cb99ea01b6c8
- rename former "pagebreak" to "newpage" since it produces a \newpage
- new LFUN
- menu entry
- tex2lyx support
- fileformat change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21732 a592a061-630c-0410-9148-cb99ea01b6c8
- safer (but slightly less nice) fix for bug 4334. Fixes bug 4347 that was introduced in r21489.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21541 a592a061-630c-0410-9148-cb99ea01b6c8
This is a continuation of r21128. This round fixes the "Word" movement
functions and LFUNS.
Behavior should remain unchanged by this fix.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21244 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
