Restore the wrap-around question when no more hits found while searching with Advanced Search.
The dispatched() flag is used currently in FindAndReplace.cpp in order to discriminate between
match found and not found and, in the latter case, pop-up the wrap-around question dialog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36279 a592a061-630c-0410-9148-cb99ea01b6c8
By default, if the lyxpipe is set up and working, loading of documents
is deferred to an already running instance. Note that an already running
instance is only used for loading, such that export from command line
still works as usual.
The default behavior can be changed through a preference setting, and,
whatever the default is, it can be overridden by command line options.
Unticking the "Single instance" check box in the preferences, LyX behaves
exactly as before the introduction of this feature.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36278 a592a061-630c-0410-9148-cb99ea01b6c8
The dispatched() flag is used currently in FindAndReplace.cpp in order to discriminate between
match found and not found and, in the latter case, pop-up the wrap-around question dialog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36277 a592a061-630c-0410-9148-cb99ea01b6c8
- to_ascii is a bad idea if your name contains two umlauts.
(LyX asserted on my for any document).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36258 a592a061-630c-0410-9148-cb99ea01b6c8
Also, change from using the "cha" prefix for chapters, a la prettyref,
to the "chap" prefix, a la refstyle. We alias \pr@chap to \pr@cha for
prettyref users.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36238 a592a061-630c-0410-9148-cb99ea01b6c8
The 100% cpu problem is still there and the culprit turns out to be r35795.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36231 a592a061-630c-0410-9148-cb99ea01b6c8
actually, does prettyref, but we should do something here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36212 a592a061-630c-0410-9148-cb99ea01b6c8
- apply our naming scheme to unit comboboxes
- set default units
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36180 a592a061-630c-0410-9148-cb99ea01b6c8
In particular, it makes paragraph breaks generate single \n in latex output
when ParbreakIsNewline is true
This means that it is not necessary anymore to use newlines to break lines.
Plain paragraph breaks can be used instead, like is done now in ERT/Listings.
This is mainly aimed at sweave support.
lyx2lyx support courtesy of Richard Heck
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36163 a592a061-630c-0410-9148-cb99ea01b6c8
- rename the private member dt to dt_,
- rename second_ and second_used_ to second_stream and second_enabled_ to have the same terminology as the stream_ and enabled_ member,
- remove FIXME because now we have a Qt pane showing the messages,
- adjust some comments.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36149 a592a061-630c-0410-9148-cb99ea01b6c8
Before, LyX could crash when calling setBusy(false) while LyX is still in a busy state due to a surrounding setBusy(true)/setBusy(false) construction.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36140 a592a061-630c-0410-9148-cb99ea01b6c8
Computes a hash value for the authors when using change tracking.
Text.cpp, BufferParams.h, Author.h:
Change unsigned int to int because the hash values can be negative.
lyx2lyx:
Allow to convert negative author_ids.
See also: r30756.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36134 a592a061-630c-0410-9148-cb99ea01b6c8
This is added to be sure that the to-be-added author hash is always 32-bit.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36126 a592a061-630c-0410-9148-cb99ea01b6c8
Now the path to the pasted graphics is saved as a relative path if possible.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36058 a592a061-630c-0410-9148-cb99ea01b6c8
recognize the argument, but that leads to an infinite loop.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36012 a592a061-630c-0410-9148-cb99ea01b6c8
Actually, it still fails to link with anything less than Qt 4.4.0
due to the xxxAndDestroy() business in GuiView.cpp ...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36009 a592a061-630c-0410-9148-cb99ea01b6c8
#6884.
1. Open LyX. File>New. Document>Outline, to make sure the TOC is open.
That isn't necessary, but it helps you to see what is happening.
2. Create a section heading (alt-P, 2) with an x in it.
3. Split the screen.
4. File>New. You should now still see the TOC for the OLD buffer.
5. Click in the top screen. You now see an empty TOC (the one for the
empty buffer).
6. Click in the empty buffer. Other TOC!
7. Back to the "x" buffer. Empty TOC. Type something. Boom!
The problem is that teh setCurrentWorkArea() call eventually gets us to
structureChanged(), which accesses documentBufferView(). But that
doesn't get reset until later, and hence everything is out of sync.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35999 a592a061-630c-0410-9148-cb99ea01b6c8
This is why it was worth doing the updateBuffer() rewrite.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35975 a592a061-630c-0410-9148-cb99ea01b6c8
VSpace, that use InsetParamsWidget, so we cannot have code that requires
InsetCommandParams there.
Stephen Witt reported a similar crash with the info dialog.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35952 a592a061-630c-0410-9148-cb99ea01b6c8
- only set/unset a caption if necessary.
This fixes the setting of multicols via dialog (part of bug 6985)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35929 a592a061-630c-0410-9148-cb99ea01b6c8
- fix console warning about unknown feature.
Not sure if SET_SPECIAL_MULTIROW is supposed to do something eventually, but if not, specialAlignmentED should probably be disabled in multirows.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35928 a592a061-630c-0410-9148-cb99ea01b6c8
Also move the saveCheckSum declaration to the section of functions involving reading/writing. And note that it should be made private.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35925 a592a061-630c-0410-9148-cb99ea01b6c8
Does anyone have a clue why nvec is declared static here ? Or can I remove it ?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35920 a592a061-630c-0410-9148-cb99ea01b6c8
GuiView::loadDocument also already calls setBuffer(), so this is not needed everytime too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35917 a592a061-630c-0410-9148-cb99ea01b6c8
Besides, now we can always call GuiView::reloadBuffer instead of calling Buffer::reload directly. This means we don't have to do the error handling each time over and over again.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35916 a592a061-630c-0410-9148-cb99ea01b6c8
Buffer::errors("Parse") is called 7 times in the whole project. 4 times from GuiView and three times from functions in other classes, but which are (almost) only called from the GuiView.
Buffer::errors is used to signal the GUI that there might be an error occuring, but what sense does it make if it is only called from the Gui ?
Isn't it better to let the function return wether it succeeded or not and let the GuiView take action in doing something with the possible errors.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35911 a592a061-630c-0410-9148-cb99ea01b6c8
use translateIfPossible here, since the module names might be non-ASCII
(thanks rgh).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35898 a592a061-630c-0410-9148-cb99ea01b6c8
argument from that function. We are always saving the checksum for the
Buffer's file. The argument is a left-over from a time when we did the
wrong thing and saved it for e.g. the emergency file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35890 a592a061-630c-0410-9148-cb99ea01b6c8
don't know if there are similar issues with other dialogs based on it,
but this seems to fix it for GuiLabel.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35886 a592a061-630c-0410-9148-cb99ea01b6c8
- Functions that inherit from the same baseclass are grouped together with a command;
- Functions that inherit should not have a doxy entry;
- Other functions are also grouped together as much as possible;
- Some function don't need to be implemented if they return the same as the baseclass;
- and more.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35873 a592a061-630c-0410-9148-cb99ea01b6c8
An example of a fatal function call is "gotoInset(this, NOTE_CODE, true)". Luckily we don't check for the contents in LFUN_NOTE_NEXT.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35860 a592a061-630c-0410-9148-cb99ea01b6c8
A dynamic_cast is necessary when:
- the object to be casted is from an external library because we can't add Qxxx::asXxxx() to Qt e.g.:
* QAbstractListModel to GuiIdListModel,
* QValidator to PathValidator,
* QWidget to TabWorkArea,
* QWidget to GuiWorkArea;
- the object is to be casted from an interface to the implementing class, because the Interface does not know by whom it is implemented:
* ProgressInterface to GuiProgress,
* Application to GuiApplication.
A dynamic_cast can be replaced by:
- already existing as***Inset() functions, e.g.:
* asHullInset(),
* asInsetMath()->asMacro(),
* asInsetText();
- a static_cast when we are sure this can't go wrong, e.g.:
* we are sure that CellData::inset->clone() is an InsetTableCell,
* in cases where we explicitly check it->lyxCode().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35855 a592a061-630c-0410-9148-cb99ea01b6c8
- rename readFromVC to extractFromVC because this function actually doesn't read anything as compared to readEmergency, readAutosave and so on.
- rename readEmergency and readAutosave to loadEmergency and loadAutosave just like loadLyXFile and loadThisLyXFile. Only in loadThisLyXFile we switch to the actually reading of a file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35854 a592a061-630c-0410-9148-cb99ea01b6c8
It's strange to have a public interface which has a function loadLyXFile and a function readFile. A user of this class will be confused about the difference.
Therefore, loadThisLyXFile will be next to loadLyXFile to stress that loadThisLyXFile will not load another file ;). I don't know whether all of you like that this function just calls readFile, but it feels good this way. All public paths for loading a file will now go through loadThisLyXFile (i.e. the paths that come from loadLyXFile), while readFile is a pure private function. If this doesn't make sense, just shout.
I think this improves the readability of the class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35852 a592a061-630c-0410-9148-cb99ea01b6c8
- group the read and emergency/autosave functions,
- add comments to the functions,
- adjust visibility of functions,
- add FIXMEs to some functions which are still unneccesarily public.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35851 a592a061-630c-0410-9148-cb99ea01b6c8
This also fixes compilation again. I forgot to cherry-pick all commits in git ;)...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35845 a592a061-630c-0410-9148-cb99ea01b6c8
The only substantive change here is moving the markDirty() call into the
first case. If we don't load the file successfully, then there is no
need to mark dirty.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35834 a592a061-630c-0410-9148-cb99ea01b6c8
Extract convertLyXFormat function that runs LyX2LyX.
(and some compile fixes)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35831 a592a061-630c-0410-9148-cb99ea01b6c8
We need to save the checksum of the requested file. Not of the autosave file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35830 a592a061-630c-0410-9148-cb99ea01b6c8
- Move the saveCheckSum to both autosave file as emergency file read function.
- Extract the function parseLyxFormat.
- Improve comment about the older LyX format numbers.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35829 a592a061-630c-0410-9148-cb99ea01b6c8
- Move some lines of code to more proper places.
- Let Buffer::readFile(FileName const &) return ReadStatus as well.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35827 a592a061-630c-0410-9148-cb99ea01b6c8
- make a new function readFromVC(),
if the file does not exist, try to extract it from the version control (RCS),
- make a new function readEmergency(),
try to read the emergency file that is associated to the file we are trying to read,
- make a new function readAutosave(),
try to read the autosave file that is associated to the file we are trying to read,
- merge loadLyXFile() and readFileHelper(),
this new function now determines which file to read.
- add more ReadStatus elements to describe failures.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35819 a592a061-630c-0410-9148-cb99ea01b6c8
helps the user to avoid errors and leads to more informative messages.
* implementation of diff and use it for the repoUpdate operation.
* add the check for merge conflicts in checkOut.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35813 a592a061-630c-0410-9148-cb99ea01b6c8
A hidden document does not have an associated Cursor. So, each time we create a new workArea, we should restore the cursor position.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35811 a592a061-630c-0410-9148-cb99ea01b6c8
