../../../../src/frontends/qt4/GuiView.C:142: warning: comparison between signed and unsigned integer expressions
../../../../src/frontends/qt4/GuiView.C:144: warning: comparison between signed and unsigned integer expressions
../../../../src/frontends/qt4/GuiView.C:146: warning: comparison between signed and unsigned integer expressions
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16113 a592a061-630c-0410-9148-cb99ea01b6c8
Part 2: avoid pure virtual function,
if (theApp)
theApp->unregisterSocketCallback(fd_);
does not help, we've tested it!
Without a Mac it is hard to find a better solution
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16110 a592a061-630c-0410-9148-cb99ea01b6c8
kAEOpenDocuments ApleEvent.
(event): new method to do the same thing using qt4 built-in support.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16099 a592a061-630c-0410-9148-cb99ea01b6c8
- execBatchCommands(): split in loadFiles() and execBatchCommands().
- exec(): enable batch command to be processed from GUI.
* Application:
- start(): deleted.
* GuiApplication:
- execBatchCommands(): new method
* GuiWorkArea::update(): call viewport()->repaint() instead of viewport()->update(), this enable to update the screen immediately when asked by a batch command.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16051 a592a061-630c-0410-9148-cb99ea01b6c8
when iconpalette detached from the math dialog, the iconpalette widget
width may become too large to fit to the screen.
when detached resized to a too small size, icons overlap.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15966 a592a061-630c-0410-9148-cb99ea01b6c8
Following patch corrects some misbehavior in TOC dialog:
- When clicking on Toc insets, dialog switches to correct list.
- cursor goes to correct entry when clicked..
- some other fixes..
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15949 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer_funcs.h
(updateLabels): Add bool childonly argument
* src/insets/insetbase.h
(addToToc): New virtual method
* src/insets/insetinclude.[Ch]
(addToToc): New virtual method
(updateLabels): New method
* src/TocBackend.h: reorganize classes so that we can forward
declare TocList
* src/insets/insetfloat.[Ch]
* src/insets/insetwrap.[Ch]
(addToToc): Adjust to type changes in TocBackend.h
* src/frontends/qt4/TocModel.[Ch]: ditto
* src/frontends/controllers/ControlToc.[Ch]: ditto
* src/TocBackend.C: ditto
(TocBackend::update) Remove test for float and wrap inset,
call virtual method instead
* src/BufferView.C
(BufferView::dispatch): make LFUN_PARAGRAPH_GOTO work even if the
target paragraph is in a different buffer
* src/MenuBackend.C: Adjust to type changes in TocBackend.h
(expandToc): Add an entry for the master doc in child docs
* src/buffer_funcs.C
(setLabel): Add text class parameter
(updateLabels): handle included docs if requested by the caller
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15904 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/ui/QPrefConvertersUi.ui: Readd translation hint
to label and remove broken tooltip that somebody created instead
* src/messages.C
(Messages::Pimpl::get): reenable stripping of [[..]] from
untranslated messages
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15872 a592a061-630c-0410-9148-cb99ea01b6c8
- new pimpled TocBackend member and associated accessors.
* toc.[Ch]: delete all toc related methods except outline.
* TocBackend:
- goTo(): deleted, this gets rid of the LyXView dependency
- made all accessors const.
* ControlToc:
- rework the controller to work exclusively with TocBackend.
- goTo(): now call LyXView::dispatch() directly
all other files: update with the TocBackend or ControlToc API changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15852 a592a061-630c-0410-9148-cb99ea01b6c8
* have the modify/new functions in the formats and converter modules share most of their code
* get rid of the pointer to PrefConverters in the
formats module
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15820 a592a061-630c-0410-9148-cb99ea01b6c8
- setBufferView(): deleted
- currentView(), setCurrentView(): new method to set the current LyXView
* GuiApplication::x11EventFilter(): use currentView().view() to get the current BufferView. This should solves the X11 selection bug.
* WorkArea:
- dispatch(): redraw only if needRedraw in preparation for the painting optimization patch. Show the cursor immediately on mouse click.
- setBufferView(): remove call to Application::setBufferView()
* GuiWorkArea:
- focusInEvent(): update only if we changed LyXView
- focusInEvent(): stop the cursor only if we changed LyXView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15783 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/QDocumentDialog.C:
* src/frontends/qt4/QPrefsDialog.C:
- force updateGeometry() for Qt >= 4.2 after the panel stack
has been built. This is a workaround for a Qt bug. See FIXMEs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15781 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/panelstack.C:
- fix the preferences and document dialog resizing problem (well, at least
for me -- please verify).
This didn't fix the problem. I'm pretty sure now that this is a bug in Qt 4.2(.1?)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15770 a592a061-630c-0410-9148-cb99ea01b6c8
- fix the preferences and document dialog resizing problem (well, at least
for me -- please verify).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15769 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.[Ch]
(symbol_encoding, symbol_encoding_): remove (unused)
* src/frontends/qt4/QLPainter.C
(QLPainter::text): Remove commented code. It was used in pre
unicode times to get unicode values of the symbol fonts if
USE_UNICODE_FOR_SYMBOLS was defined, but this was never defined
anyway, since the code points of the symbol fonts (as written in
lib/symbols) are directly used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15758 a592a061-630c-0410-9148-cb99ea01b6c8
math delimiter size values
* Status.15x: kill one bug & add a new one
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15753 a592a061-630c-0410-9148-cb99ea01b6c8
- hasFocus(): new pure virtual method
- redraw(): update singlePar only if the Widget has the focusInEvent
* GuiWorkArea.h: implement hasFocus().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15724 a592a061-630c-0410-9148-cb99ea01b6c8
- Get rid of setRenderHint for anti-aliasing, because we should respect user windows setting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15699 a592a061-630c-0410-9148-cb99ea01b6c8
Use case: Two window share the same buffer. The first window is resize. This modify the inner Buffer structure because Paragraph has a notion of line break and thus line width. When switching to the other window which does not have the same size, LyX crashes because the line break is not adapted the this BufferView width.
This commit fix the crash by resizing the BufferView on a focusInEvent(). That is not a good fix but it is a fix nevertheless. The bad side effect is that when the two BufferView shows the same portion of the Buffer, the second BufferView will show the same line breaks as the first one even though those line breaks are not adapted to the second BufferView width... such is life!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15697 a592a061-630c-0410-9148-cb99ea01b6c8
- the cursor is still a widget, the width is 2-pixel on Windows and 1-pixel on other platforms. The full screen refresh on blinking cursor bug is now gone.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15695 a592a061-630c-0410-9148-cb99ea01b6c8
Qt doc for QMouseEvent::button():
Note that the returned value is always Qt::NoButton for mouse move events.
so we must use buttons() instead because later on
the code checks for the left button.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15693 a592a061-630c-0410-9148-cb99ea01b6c8
* GuiView::init(): switch to the first avalaible buffer if any.
* GuiWorkArea::focusInEvent(): update the LyXView tab bar there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15685 a592a061-630c-0410-9148-cb99ea01b6c8
frontends/LyXView.h
- add tab update function
frontends/qt4/GuiView.h
- add tab update function
- add function for setting up the tabs
- add slot for the tab clicks
- add pimpl
frontends/qt4/GuiImplementation.C
- don't set the buffer as central widget
but initilize the tabs
frontends/qt4/GuiView.C
- use QTabBar for switching
- scan the bufferlist on updates
frontends/LyXView.C
- also update the tabs
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15637 a592a061-630c-0410-9148-cb99ea01b6c8
revert first patch http://www.lyx.org/trac/changeset/15597
* frontends/qt4/GuiView.C:
don't 'break' the toolbar because it doesn't work if
the toolbar will be hidden
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15636 a592a061-630c-0410-9148-cb99ea01b6c8
* delete some comments
* use lyxerr instead of cout in PanelStack
* move PanelStack into lyx::frontend namespace
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15623 a592a061-630c-0410-9148-cb99ea01b6c8
- ctor and dtor moved to public:
- QLPainter(): takes a QPaintdevice instead of a QWidget.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15619 a592a061-630c-0410-9148-cb99ea01b6c8
* Painter: new ctor that sets drawing_enabled_ to true.
* setDrawingEnabled(), isDrawingEnabled(): new methods.
* QLPainter.C: only draw if drawing is enabled.
* nullpainter.h: deleted.
* rawpainter.C::paintPar(): only draw if we are inside the Paragraph.
* InsetTabular::draw(): use new Painter method instead of a NullPainter.
* InsetMathNest::drawSelection(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15613 a592a061-630c-0410-9148-cb99ea01b6c8
* QLPainter::paintText(): use GuiFontMetrics::metrics(QString) to avoid an ucs4 to QString conversion.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15584 a592a061-630c-0410-9148-cb99ea01b6c8
* QLPainter::paintText(): use the font width cache instead of the painter metrics.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15580 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.h
(encoding_table): remove, this is no longer needed with unicode
(iconvName_): new member: name of the encoding in iconv syntax
* src/exporter.C
(Exporter::Export): Use return value of Buffer::makeLaTeXFile
* src/buffer.[Ch]
(Buffer::makeLaTeXFile): return whether the file has been created
successfully
* src/buffer.C
(Buffer::makeLaTeXFile): Use a docstream that converts to the correct
encoding
Display an error dialog is something went wrong
* src/bufferparams.C
(BufferParams::writeLaTeX): Undo the utf8 inputenc hack
* src/frontends/qt4/QDocumentDialog.C: Add some FIXMEs
* src/support/unicode.[Ch]
(eightbit_to_ucs4): New conversion function
(ucs4_to_eightbit): New conversion function
* src/support/docstream.[Ch]
(utf8_codecvt_facet_exception): Move to header and rename to
iconv_codecvt_facet_exception
(odocfstream): Take the encoding as argument
* src/support/docstream.C
(utf8_codecvt_facet): Generalize to other encodings than utf8 and
rename to iconv_codecvt_facet
* src/encoding.C: Remove obsolete tables
* src/output_latex.C
(TeXOnePar): Convert the paragraph to different encoding if needed
* lib/encodings: Remove obsolete tables
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15564 a592a061-630c-0410-9148-cb99ea01b6c8
1) crash in GuiWorkArea::paintEvent(), this one is solved by by encapsulating the file loading in LyXView by busy(true)/busy(false) and by disabling/enabling the work area update in GuiView::busy().
2) crash in the cursor blinking because the cursor is timed out at the moment you click on "Revert". So the blinking cursor is now disabled/enabled in GuiView::busy().
3) crash in BufferView::setBuffer() because the current buffer was already closed folling the "revert" command.
* BufferView::loadLyXFile(): set buffer_ to 0 in case of a reload (when document is reverted)
* LyXView:
- busy() is not const anymore (work_area_ is modified in GuiView)
- loadLyXFile(): encapsulate the file loading with busy(true)/busy(false)
- setBuffer(): encapsulate the buffer-switching with busy(true)/busy(false)
* GuiView::busy()
- disable/enable workarea updates.
- disable/enable blinking cursor.
* WorkArea: new startBlinkingCursor() and stopBlinkingCursor() methods.
* rowpainter.C:
- paintText(): make sure there is a Buffer from which to paint.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15556 a592a061-630c-0410-9148-cb99ea01b6c8
use position returned by BufferView
src/bufferview_funcs.C:
adjust cursor x-position by hand
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15555 a592a061-630c-0410-9148-cb99ea01b6c8
* qt4/Alert_pimpl.C: make sure the proper Qt attributes are set.
* GuiApplication::quitLyx(): add the "force" argument to the funcRequest.
* GuiImplementation:
- GuiImplementation(): remove the signal connection. This was triggered after the LastWindowClosed signal so was not useful.
- cleanupViews(): renamed to unregisterView() and handle the WorkAreas as well.
- closeAll(): new method (from LyXView).
* GuiView.C
- clean up the includes order.
- closeEvent(): make sure that theBufferList().quitWriteAll() is called if last window closed.
* lyx_main.C / LyX::quit():
- remove noAsk argument
- delete bufferList::quitWriteAll() call (this is handled in the frontend).
- delete Session stuff (ditto)
* LyXFunc::dispatch()
- LFUN_LYX_EXIT: close all window before exiting from user command (as opposed to last window closed).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15535 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXFunc:
- dispatch(): transfer assertion on lyx_view_ to each LFUN on a case by case basis.
- dispatch(): new LFUN_WINDOW_CLOSE
- getStatus(): special treatment for LFUN_LYX_QUIT
* LyX:
- views_, addLyXView(): deleted
- quit(): call saveGeometry() on each LyXView before exiting.
* GuiApplication:
- is now a QObject.
- quitLyX(): new Qt slot for lastWindowClosed signal.
* Gui.h:
- destroyView(), destroyWorkArea(): deleted
- viewIds(): new method
* GuiImplementation:
- implement above changes.
- GuiImplementation is now a QObject
- cleanupViews(): new private slot.
- buildViewIds(): new helper method
- views_ and work_areas_ are now maps of raw pointers instead of schared_ptr.
* LyXView
- now stores its id.
- dispatch(): special treatment for LFUN_WINDOW_CLOSE.
- workAreaIds(): new method.
- close(): new pure virtual method.
- saveGeometry(): new pure virtual method.
* GuiView:
- implements above changes.
- GuiView(): set WA_DeleteOnClose and Qt::WA_QuitOnClose to let Qt manage the destruction on close().
- closeEvent(): session stuff transfered to saveGeometry()
* WorkArea
- now store its id.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15514 a592a061-630c-0410-9148-cb99ea01b6c8
- Various micro-optimisations
- Revert Abdel's repaint instead of update for QPainter
- Get rid of unused methods in GuiWorkArea
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15491 a592a061-630c-0410-9148-cb99ea01b6c8
changing between using it and the keyboard-cursor
movements.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15473 a592a061-630c-0410-9148-cb99ea01b6c8
* src/mathed/MathParser.C
(parse1): behave correctly when a wrong delimiter is specified.
* src/mathed/InsetMathBig.C
(write): don't write a space before delimiter.
* src/frontends/qt4/QDelimiterDialog.C
(QDelimiterDialog): make translatable the string "Variable size".
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15397 a592a061-630c-0410-9148-cb99ea01b6c8
- Polish the behavior when the TOC is empty (clearing the button and the TOC tree)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15373 a592a061-630c-0410-9148-cb99ea01b6c8
This commit also modifies the LyXFunc class. A LyXView is not needed any more at construction. Neither is the top level keymap. The LyXFunc key sequences are initialized only if we are in GUI mode (lyx::use_gui = true).
The next step is to rename LyXFunc::owner to LyXFunc::lyx_view_ and to put some BOOST_ASSERT. A classification between Gui and Kernel oriented LFUNs would also be welcome.
*LyX/lyx_main.[Ch]:
- LyX::Singletons: new private structure containing all the singletons (except the main LyX one of course).
- buffer_list_, top_level_keymap, session_: transfered to the LyX::Singletons structure.
* LyXFunc:
- LyXFunc: default constructor does not need any arguments.
- setupLocalKeymap(): deleted (was not used anywhere).
- initKeySequences(): new public method called from lyx_main.C, useful only in lyx::use_gui mode.
- new private member accessor methods
* Application:
- Application_pimpl: deleted (transfered to LyX)
- global singleton accessors: transfered to lyx_main.C
- start(): code transfered to LyX::priv_exec()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15367 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt3/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
* src/frontends/qt3/ui/NumberingModuleBase.ui: show scrollbar when appropriate.
* src/frontends/qt4/QDocumentDialog.C (updateNumbering): don't include headings
that have no counter in their label.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15352 a592a061-630c-0410-9148-cb99ea01b6c8
* QToc::update(): return early if no TOC type.
* QTocDialog::updateGui(): return early of the Type model is empty and disable the outline buttons.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15346 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.h: define "extern bool lyx::use_gui" here.
* NoGuiFontMetrics.h: new class for command-line LyX
* NoGuiFontLoader.h: new class for command-line LyX
* Application.C:
- theFontMetrics(): returns the above dummy FontMetrics when use_gui is false.
- theFontLoader(): returns the above dummy FontLoader when use_gui is false.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15339 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/GuiApplication.C
(lyx::frontend::Application * createApplication): Don't return the
address of a temporary, but use the new operator.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15313 a592a061-630c-0410-9148-cb99ea01b6c8
Only qt4 is guaranted to compile and work. I did not remove gtk and qt3 lyx_gui.C because they might be needed for reference to complete the header declarations in "GuiApplication.C".
- lyx_gui::use_gui transfered to lyx::use_gui in lyx_main.C
- all remaining lyx_gui functions transfered to Application and corresponding GuiApplication implementations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15306 a592a061-630c-0410-9148-cb99ea01b6c8
export (e.g. the ToC) and the navigate menu.
* src/insets/insetbase.h
(InsetBase::plaintext): output to a docstream
(InsetBase::textString): ditto
* src/mathed/TextPainter.h
(TextPainter::show): ditto
* src/support/docstream.[Ch] New file and string streams for
docstring. The file streams convert to UTF8 on the fly.
* many more files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15301 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
- text(): now returns drawn text width()
* rowpainter:
- paintChars(): use the returned width from Painter::text() instead of recalculating it.
All other files: implement the API change. qt3 and gtk not 100% guaranted to compile nor work.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15294 a592a061-630c-0410-9148-cb99ea01b6c8
* controllers/Dialog.[Ch]
- View::title_ is now a docstring (ctor and access functions changed)
* controllers/ControlLog.[Ch]
- title() now returns a docstring
* controllers/ControlLog.[Ch]
- title() now returns a docstring
* qt4/*: adapted to above changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15283 a592a061-630c-0410-9148-cb99ea01b6c8
* lstrings.[Ch]: new docstring trim() function
* qt4/validators.C: PathValidator::validate() and printable_list() converted to unicode.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15281 a592a061-630c-0410-9148-cb99ea01b6c8
- getChangeAuthor() and getChangeDate(): converted to unicode.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15279 a592a061-630c-0410-9148-cb99ea01b6c8
- ucs4_to_qchar() and qchar_to_ucs4() have been inlined.
- ucs4_to_qstring(): pass a QString to avoid a copy.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15266 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, I replaced all methods in the font_metrics namespace by a proper virtual interface FontMetrics. The FontLoader is _the_ container for FontMetrics.
This patch should also bring some optimizations in a number of place in the code. This is because we do not need any more to search for the LyXFont at each font_metrics call. In effect, the speed advantage is not as sensible and this is a bit deceiving considering that this was my primary motivation behind the patch. But I like the patch anyway as it cleans up the relation and interfacing between fonts, metrics and frontends.
* frontends/FontMetrics.h: new virtual interface. Renamed from font_metrics.h
* qt4/GuiFontMetrics: corresponding qt4 implememtation. Renamed from qfont_metrics.C. The smallCaps particular case treatment has been transfered here as well as the width cache for MacOSX and Windows.
* qt4/QLPainter.C: the smallCapsText has been reworked to return the width of the drawn text.C
all other files: replace font_metric helper function call with corresponding FontMetrics method calls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15265 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/FontLoader.h: new interface class.
* frontends/Application.h: new FontLoader() pure virtual method
* frontends/lyx_gui: update_fonts() and font_available() methods deleted
* [qt3/qt4/gtk]/GuiApplication: implement the new interface
* qt4/GuiFontLoader:
- renamed from FontLoader
- now derives from FontLoader
- now in the lyx::frontend namespace
* qt3/qfont_loader
- now derives from FontLoader
* gtk/xftFontLoader
- now derives from FontLoader
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15220 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C and lyx_cb.C: use Application methods directly instead of the above functions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15211 a592a061-630c-0410-9148-cb99ea01b6c8
virtual std::string const romanFontName() = 0;
virtual std::string const sansFontName() = 0;
virtual std::string const typewriterFontName() = 0;
My goal is to transfer all of "frontends/*/lyx_gui.C" to "frontends/lyx_gui.C". When this is done, "frontends/lyx_gui.C" can go altogether as its functions will then be replaced with direct calls to theApp->XXX().
* frontends/lyx_gui.C: new file with code transfered from [qt3,qt4,gtk]/lyx_gui.C
* frontends/Application: 3 new font related pure virtual methods
* [qt3,qt4,gtk]/GuiApplication: implement the above method with code transfered from lyx_gui.C
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15208 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetgraphics.C
(findTargetFormat): return pdf for vector graphics
* src/format.h
(Flags): new enum describing format flags
(flags_): new member variable for format flags
(vectorFormat): new, tell whether a format can contain vector graphics
* src/format.C: adjust to flags changes
* src/frontends/qt[34]/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new vector flag
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt3/ui/QPrefFileformatsModule.ui
* src/frontends/qt4/ui/QPrefFileformatsUi.ui
(vectorCB): new checkbox for vector flag
* src/lyxrc.C
(LyXRC::read): read vector flag
(LyXRC::write): write vector flag
* lib/doc/Customization.lyx: document format flags
* lib/configure.py
(checkFormatEntries): Add vector flag to some formats
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15205 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiView.C
(setGeometry): replace test for Q_OS_WIN32 with Q_WS_WIN
* src/support/fontutils.C:
If X_DISPLAY_MISSING is defined, compile the code for Win32
on cygwin, too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15201 a592a061-630c-0410-9148-cb99ea01b6c8
These font related functions were identical for qt3 and qt4. They are not Qt dependent at all and could also apply to an eventual Win32 or MacOSX gtk port.
Jen-Marc says: It would be nice to convince fontconfig to do the same for linux.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15196 a592a061-630c-0410-9148-cb99ea01b6c8
* gtk/qt3/qt4/GuiApplication: createView() method deleted
* LyXView:
- init(): is now a pure virtual method. autoSave code transferred to constructor and updates to the frontends.
- setGeometry(): new pure virtual method
* gtk/GView, qt3/QtView, qt4/GuiView: adapted to above change
- setGeometry(): code transfered from GuiApplication
* lyx_main.C: call LyX::ref().addLyXView() in there instead of in Application::createView()
*
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15183 a592a061-630c-0410-9148-cb99ea01b6c8
addWithStatus(). It also replaces LyXView uses with BufferView as none of the LyXView feature were used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15181 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
Most of qt3 and gtk should stay compilable except for LyXView.h because the LyXFunc instance has been transferred to Application.
* frontends/Application: new class aimed to be the one unique interface between the frontend and the kernel. Contains one global pointer to the unique instanciation theApp.
* frontends/qt4/GuiApplication: renamed from qt4/Application, the qt4 specialisation of the Application class. Contains one global pointer to the unique instanciation guiApp (equal to theApp but pointing to a GuiApplication instead).
* frontends/qt4/lyx_gui.C: most of the code has been moved to Application and GuiApplication
All other file: adapted to new API.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15114 a592a061-630c-0410-9148-cb99ea01b6c8
No scons and cmake support! scons and cmake need to find out the size of
wchar_t and define this macro in config.h (example for 32bit wchar_t):
* The size of a `wchar_t', as computed by sizeof. */
#define SIZEOF_WCHAR_T 4
* configure.ac: Test size of wchar_t
* src/support/types.h: don't include docstring.h anymore.
Use wchar_t as lyx::char_type if it is 32 bit wide.
* src/support/docstring.h: Use lyx::char_type for defining docstring
* src/metricsinfo.h: include support/docstring.h instead of
support/types.h
* src/lyxlex.h: ditto
* src/frontends/font_metrics.h: ditto
* src/frontends/qt4/qt_helpers.h: ditto
* src/frontends/Painter.h: ditto
* src/errorlist.h: ditto
* src/support/lstrings.h: ditto
* src/lyxfunc.h: ditto
* src/LaTeX.h: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14991 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/qt_helpers.[Ch]
(toqstr): add variant for docstring
(qstring_to_ucs4): Use docstring and port from qt4 to qt3
* Many other files: Many std::string -> lyx::docstring conversions
* src/support/lstrings.[Ch]
(subst): Add variant for docstring and char_type
(externalLineEnding): std::string -> lyx::docstring
(internalLineEnding): std::string -> lyx::docstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14871 a592a061-630c-0410-9148-cb99ea01b6c8
* qfont_metrics.C: make use of above methods instead of those in unicode.[Ch]
* QLPainter.C: ditto
* QLyXKeySym.C: ditto + simplification and a BOOST_ASSERT that verifies that the event is one char only.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14852 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiWorkArea.C
(GuiWorkArea::dropEvent): Use toLocalFile instead of toString,
because toString omits the first backslash of UNC paths.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14846 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/Action.C (Action): do not set entry to
checkable by default; invoke update() to set it up.
(update): only set checkable property if needed.
* src/frontends/qt4/QLPopupMenu.C (populate): in the case of
a Command menu item, let Action set itself up.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14811 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* BufferView/pimpl:
- scrollDocView(): call to BufferView::update() deleted.
- scrollDocView(): second part is now in setCursorFromScrollbar()
- setCursorFromScrollbar(): new method.
* WorkArea:
- setBufferView(): show the cursor immediately
- redraw(): call to updateScrollbar()
- updateScrollbar(): new method
- scrollBufferView(): fix it and show the cursor immediately.
* qt4/GuiWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
- paintEvent(): scrollbar related code deleted
* qt3/QWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
* qt3/QContentPane
- paintEvent(): scrollbar related code deleted
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14704 a592a061-630c-0410-9148-cb99ea01b6c8
- simplify setting/unsetting of item
- consolidate 2 methods that set bulletSelected
- store character (int) instead of pointer to item
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14672 a592a061-630c-0410-9148-cb99ea01b6c8
- src/support/unicode.[Ch]: new files with functions for converting
to and fro ucs4, ucs2 and utf8.
- src/support/docstring.h: specialization of basic_string that
holds a uint32_t internally.
- Several functions changed to use char_type instead of char or unsigned char.
- Qt3 and Qt4 sends ucs2 on to core
- Gtk sends ucs4 on to core
- Read and write utf-8 .lyx files.
- font_metrics and painter updated to handle ucs4 chars as input.
- Quite a bit of ugly compability code, conversion string->docstring, etc.
- Have fun...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14661 a592a061-630c-0410-9148-cb99ea01b6c8
