we will be cautious, of course). The problem was that we were issuing
the Buffer::changed() signal before we did updateBuffer(), and this
caused an inconsistency. The idea here is to defer issuing this signal
until we call processUpdateFlags(). We know we need a redraw if we've
deleted a whole paragraph.
This should work properly, so long as checkDepm is called from within
the dispatch mechanism. There may, however, be other paths, and I've
noted one explicitly with a FIXME in Text2.cpp. I've tested a few
different variations, however, and I haven't seen any problems. But if
we do run into problems, we can go ahead and do the update there that we
were previously doing in checkDepm itself.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40352 a592a061-630c-0410-9148-cb99ea01b6c8
- Interpret argument of LFUN_SPACE_INSERT correctly
- Use InsetMathSpace instead of InsetMathSpecialChar for "\ " (bug # 7728)
- Use InsetMathSpace instead of InsetMathChar for ~ (bug # 7728).
This fixes also the display in LyX (previously a literal ~ was displayed).
Using InsetMathSpace enables also the "Insert Formatting" menu entries.
No file format change is needed, since the LaTeX export is unchanged.
Note that there are still some bugs related to spaces in math:
#7746, #7747, #7749, #7842
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39947 a592a061-630c-0410-9148-cb99ea01b6c8
resetFontEdit(). The former is used for on-screen and export formatting,
and the latter is used for interactive editing.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37761 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
Move isFullyDeleted() to static function in CutAndPaste.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30956 a592a061-630c-0410-9148-cb99ea01b6c8
I also updated InsetMathMBox so that it remains compilable, even if not used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30940 a592a061-630c-0410-9148-cb99ea01b6c8
- issue setLabelWidthStringToSequence only once for a selected range of paragraphs
of the same layout and depth. This fixes an assertion reported here:
http://marc.info/?l=lyx-devel&m=124774758211589
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30752 a592a061-630c-0410-9148-cb99ea01b6c8
Fix the rest of the code, whih implies fixing a few potential bugs where the appendix status was not taken in account.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30524 a592a061-630c-0410-9148-cb99ea01b6c8
- new member setLabelWidthStringToSequence
* Text2.cpp (setParagraphs):
- use that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29839 a592a061-630c-0410-9148-cb99ea01b6c8
* Remove the EDITABLE enum,
* add functions hasSettings() for all insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29375 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=5088
After executing DEPM to remove a double space, the position of the cursor was only 'fixed' if the cursor remained in the same par. This patch corrects this
to fix the position of the cursor also when the cursor is in a nested inset which is in the same par. This is needed because otherwise the cursor would not
point to the inset but one pos after it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27715 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=4836
reset_language was not correctly handled.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24674 a592a061-630c-0410-9148-cb99ea01b6c8
Specifically, moved the functions which actually move left or right from Text
into Cursor, and changed the semantics so that they now return whether or not
the cursor has moved. The functions in Text now use the new functions in Cursor.
This change is being made in preparation of the Word-level visual movement.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24601 a592a061-630c-0410-9148-cb99ea01b6c8
The need for a LayoutPtr arises from the fact that (a) we do not want to give our clients a Layout &, since we do not want them to be able to change our Layout; but (b) we also need to be able to change which layout is ours. So we cannot store a Layout const &. Or so it seems to the compiler.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23522 a592a061-630c-0410-9148-cb99ea01b6c8
Sorry, Andre, but this broke not only the modules stuff but the general handling of TextClasses. I'm not opposed to doing this sort of thing, but it's going to be a little more complicated. I'll do it when I get a bit of time, or I can explain what the issue is here if you want to do it.
I'll separately re-commit some of the cleanup here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23189 a592a061-630c-0410-9148-cb99ea01b6c8
Only when an LTR paragraph *ends with* an RTL chunk of text, movement was
incorrect in two ways:
1. After moving into the pargraph from the end, and then trying to move towards
the beginning of the paragraph, the cursor would immediately jump to the
previous pargraph.
2. If the cursor were placed inside the RTL text, and then we would move left
towards the beginning of the paragraph, upon reaching the end (beginning?) of
the RTL chunk, cursor would jump to the end of the paragraph, and then continue
as in (1).
(Same thing, of course, with the reverse situation, i.e., RTL paragraph ending
with LTR text).
We now deal with both of these cases correctly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23173 a592a061-630c-0410-9148-cb99ea01b6c8
Also a few cosmetical changes where I xould not resist.
Would be nice if the 'modules people' could verify that their baby
is strill alive...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23154 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
appendix marker if the deleted paragraph was the last one (bug 4352)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21639 a592a061-630c-0410-9148-cb99ea01b6c8
the LFUN had stopped working, because since language is no longer part of the
font, changes to the language were no longer being registered in the fontInfo,
and so we were wrongly under the impression that nothing had been changed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21305 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
This is the first patch in a series meant to remove LTR bias from the code.
Currently, there are many places in the code where "right" and "left" are used,
but where we actually mean "forward" and "backwards" --- which is the same
thing in LTR text, but not in RTL/Bidi text.
See full details in http://permalink.gmane.org/gmane.editors.lyx.devel/97550.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21128 a592a061-630c-0410-9148-cb99ea01b6c8
- Move Changes.h out of Paragraph.h
- pimpl the inset list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21033 a592a061-630c-0410-9148-cb99ea01b6c8
In the future, when Cursor has been fixed to work correctly with multiple views of the same Buffer, we could transfer the Undo owner from Buffer to Cursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21031 a592a061-630c-0410-9148-cb99ea01b6c8
(maily move layout related enums into a header of there own to remov
include dependencies, alos rename a few things)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20598 a592a061-630c-0410-9148-cb99ea01b6c8
This is related to the move of current_font from text to cursor (r19999).
Specifically, after r20261, this is necessary in order that the font not
remain in "latex_language" when exiting an ERT inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20477 a592a061-630c-0410-9148-cb99ea01b6c8
* Text2.cpp (deleteEmptyParagraphMechanism):
* paragraph_func.cpp (breakParagraph): make sure that the start of
appendix marker is not lost when deleting or breaking a paragraph
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20121 a592a061-630c-0410-9148-cb99ea01b6c8
- getFont() becomes TextMetrics::getDisplayFont()
- setCharFont() now needs a display font.
- setInsetFont() and setFont() now needs a BufferView, will be transferred to TextMetrics too.
- isRTL(): moved to TextMetrics
- isRTLBoundary(): ditto
- font_: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20014 a592a061-630c-0410-9148-cb99ea01b6c8
paragraph-params \align right
will align the paragraph right, leaving spacing, etc, as they were, whereas
paragraph-params-apply \align right
will align the paragraph right but also reset all other parameters to defaults. Note, by the way, that this means that
paragraph-params-apply
sets everything to default.
Some new arguments have also been introduced. These are:
\indent
\indent-toggle
\spacing default
Of course, none of these are found in valid LyX files, but they are useful in menu bindings, etc.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19581 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator.cpp (forwardPos, backwardPos): move the 'flat' part to...
* CursorSlice.{h,cpp} (forwardPos, backwardPos, at_end, at_begin): new methods, the first two are part of their DocIterator homonym
* Text2.cpp (setFont): receive CursorSlice arguments as the function is not recursive, adapt
* Text.cpp:
* lyxfind.cpp (findNextChange):
* insets/InsetCollapsable.cpp: adapt
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19500 a592a061-630c-0410-9148-cb99ea01b6c8
* Layout.h:
- name_, obsoleted_by_, depends_on_ are now docstrings.
All other changes results from the above string -> docstring changes. In particular, we now try to translate the layout names only if possible (i.e. if they are ASCII only).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19042 a592a061-630c-0410-9148-cb99ea01b6c8
is that we distinguish between the "Default" alignment and whatever
that default happens to be: I.e., so far as the code goes, the UI now
distinguishes LYX_ALIGN_LAYOUT from LYX_ALIGN_WHATEVER, when WHATEVER
happens to be the default. So you can explicitly force, say, left-align,
and that will stick between document classes.
* src/Paragraph.cpp:
Don't output params if alignment is the default.
* src/ParagraphParameters.cpp
Treat LYX_ALIGN_LAYOUT as its own alignment.
* src/Text2.cpp
Treat LYX_ALIGN_LAYOUT as its own alignment, and force it to be accepted
as a possible alignment.
* src/frontends/controllers/ControlParagraph.{h,cpp}
New method haveMultiParSelection().
*src/frontends/qt4/QParagraph.{h,cpp}
*src/frontends/qt4/ui/ParagraphUi.ui
UI adjustments as mentioned.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18922 a592a061-630c-0410-9148-cb99ea01b6c8
