otherwise no Makefile is generated in the po dir and compilation fails.
Once the empty file served the purpose, remove it in order to
immediately trigger its regeneration, which would only happen after
updating one of the Makefile.am files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20527 a592a061-630c-0410-9148-cb99ea01b6c8
xft-fonts package is still required. However, on *nix there seem
to be no way to tell fontconfig to prefer our fonts instead of
others matching the requirements, so, in case of conflict, the
fontconfig files should be manually adjusted, or some existing
font package used (note that the quality of the bakoma fonts is
better than that of the xft ones). There is no such problem on
Windows where our private fonts are always preferred over the
installed ones (and I hope the same holds true for Mac).
* src/LyX.cpp
(LyX::exec): don't call addFontResources() and restoreFontResources()
anymore, as the frontend code will do the job.
* src/frontends/qt4/GuiFontLoader.{cpp,h}
(GuiFontLoader::GuiFontLoader): register math fonts with Qt.
(GuiFontLoader::~GuiFontLoader): unregister math fonts.
* src/support/os.h
* src/support/os_unix.cpp
* src/support/os_win32.cpp
* src/support/os_cygwin.cpp:
remove code dealing with fonts.
* configure.ac: don't check for fontconfig headers anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20128 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/os_unix.cpp
(addFontResources): add the system fonts dir to the paths
scanned by fontconfig.
(restoreFontResources): remove the system fonts dir from the
fontconfig configuration.
* configure.ac:
add check for the fontconfig devel headers.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20034 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/tempname.cpp: move code about HAVE_MKSTEMP here (only user)
* src/pch.h:
* src/Buffer.cpp:
* configure.ac: remove all traces of utime.h and HAVE_UTIME
* config/lyxinclude.m4: remove WITH_WARNING define (which be rendered useless in
a future commit from christian)
* development/scons/SConstruct: try to update.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19395 a592a061-630c-0410-9148-cb99ea01b6c8
put LIBICONV in LIBS.
* src/Makefile.am:
* src/client/Makefile.am: update accordingly.
* config/qt4.m4: do not try to run pkg-config tests when pkg-config
is not installed.
* INSTALL.MacOSX: advise to use pkg-config; remove -lz from LDFLAGS;
remove --with-frontend=qt4 from configure line; in the svn case, remove
also --disable-stdlib-debug and --disable-concept-checks (and explain
why --disable-stdlib-debug may be needed).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19056 a592a061-630c-0410-9148-cb99ea01b6c8
preferences file with \use_converter_cache true. It is disabled by default,
and no GUI support for changing the preferences is yet implemented.
* src/insets/insetgraphics.C
(InsetGraphics::prepareFile): Use image file cache
* src/insets/ExternalSupport.C
(updateExternal): Use image file cache
* src/exporter.C
(Exporter::Export): Do not use image file cache
* src/graphics/GraphicsCacheItem.C
(CacheItem::Impl::imageConverted): Add the converted file to the
image file cache
(CacheItem::Impl::convertToDisplayFo): Use image file cache
* src/converter.C
(Converters::convert): Use image file cache if the caller allowed that
* src/converter.h
(Converters::convert): Adjust arguments
* src/Makefile.am: Add new files
* src/support/lyxlib.h
(chmod): new function
(copy): add mode argument
* src/support/copy.C
(chmod): new function
(copy): implement mode argument
* src/support/mkdir.C
(lyx::support::mkdir): Add warning if permissions are ignored
* src/lyxrc.[Ch]: Add new settings \converter_cache_maxage and
\use_converter_cache
* src/ConverterCache.[Ch]: New image file cache
* src/importer.C
(Importer::Import): Do nut use the image file cache
* src/lyx_main.C
(LyX::init): Initialize the image file cache
* src/mover.[Ch]
(Mover::do_copy): Add mode argument
(SpecialisedMover::do_copy): ditto
* configure.ac: Check for chmod
* development/cmake/ConfigureChecks.cmake: ditto
* development/cmake/config.h.cmake: ditto
* development/scons/SConstruct: ditto
* development/scons/scons_manifest.py: Add new files
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15897 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer.C
(Buffer::insertStringAsLines): Uncomment isPrintable test
* src/support/lstrings.C
(compare_no_case): Use char_type and not int for the docstring version
(ascii_tolower): Convert to a template
(compare_ascii_no_case): Do not use a template anymore, because we
need int for the string version and char_type for the docstring
version as intermediate type
(lowercase): Use towlower if possible
(uppercase): Use towupper if possible
* src/support/textutils.h
(isLetterChar): Use iswalpha if possible
(isPrintable): Use iswprint if possible
(isPrintableNonspace): Use iswprint and iswspace if possible
(isDigit): Use iswdigit if possible
* src/paragraph.C
(Paragraph::asString): remove obsolete FIXME
(Paragraph::transformChar): add FIXME
* configure.ac: Add definition of LIBC_WCTYPE_USES_UCS4 to config.h
* development/cmake/config.h.cmake: ditto
* development/scons/SConstruct: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15893 a592a061-630c-0410-9148-cb99ea01b6c8
* configure.ac: avoid the cygwin test for setting USE_BOOST_FORMAT
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15228 a592a061-630c-0410-9148-cb99ea01b6c8
No scons and cmake support! scons and cmake need to find out the size of
wchar_t and define this macro in config.h (example for 32bit wchar_t):
* The size of a `wchar_t', as computed by sizeof. */
#define SIZEOF_WCHAR_T 4
* configure.ac: Test size of wchar_t
* src/support/types.h: don't include docstring.h anymore.
Use wchar_t as lyx::char_type if it is 32 bit wide.
* src/support/docstring.h: Use lyx::char_type for defining docstring
* src/metricsinfo.h: include support/docstring.h instead of
support/types.h
* src/lyxlex.h: ditto
* src/frontends/font_metrics.h: ditto
* src/frontends/qt4/qt_helpers.h: ditto
* src/frontends/Painter.h: ditto
* src/errorlist.h: ditto
* src/support/lstrings.h: ditto
* src/lyxfunc.h: ditto
* src/LaTeX.h: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14991 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/unicode.C
(bytes_to_ucs4): make it work on big endian machines
(bytes_to_ucs2): make it work on little endian machines
(ucs2_to_ucs4): ditto
(utf8_to_ucs4): Invoke iconv with explicit BE suffix
(ucs2_to_ucs4): ditto
(ucs4_to_ucs2): ditto
(ucs4_to_utf8): ditto
* configure.ac: Check for byte order
* development/scons/SConstruct: Ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14890 a592a061-630c-0410-9148-cb99ea01b6c8
* config/lyxinclude.m4: reset release date for development versions.
* src/version.C.in: make lyx_release_date a placeholder.
* src/lyx_main.C (parse_version):
* src/frontends/controllers/ControlAboutlyx.C (getVersion): change a
bit the display of LyX release date.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14712 a592a061-630c-0410-9148-cb99ea01b6c8
* configure.ac: removed frontends/qt4/moc compilation.
* frontends/qt4/: moc files (*_moc.cpp) are now included at the end of relevant source file (*.C)
* SConscript: adapted to "moc included in .C file" change.
* frontends/qt4/Makefile.am: adapted to "moc included in .C file" change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13860 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyx_main.C (init): call Formats::setAutoOpen.
* src/lyxrc.C (read): do not reset editor/viewer values of "none".
* src/format.C (fixCommand): helper function: tweak command depending
of the availability of OS viewer/editor.
(setAutoOpen): run fixCommand over all the formats.
* src/support/Makefile.am: under win32, link against shlwapi.dll.
* src/support/os_*.C (canAutoOpenFile, autoOpenFile): new
functions, used to let the OS handle viewers and editors it knows about.
* configure.ac: improve check for shlwapi.
* lib/configure.py: remove check for native windows viewers.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13855 a592a061-630c-0410-9148-cb99ea01b6c8
* config/Makefile.am:
* config/cygwin.m4: remove special cygwin tests
* configure.ac: check for shlwapi and gdi32 libraries (needed in
windows); do not check special cygwin features.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13841 a592a061-630c-0410-9148-cb99ea01b6c8
instead of lyxrc.defaults. Simplify the check for
chkconfig.ltx.
* configure.ac: do not run lib/configure.py
* lib/doc/Makefile.am: LaTeXConfig.lyx is not generated anymore.
* lib/configure.py (removeExtraFiles): remove.
* lib/Makefile.am: no files are generated in there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13763 a592a061-630c-0410-9148-cb99ea01b6c8
* Make sure that no source files in boost are executable
* Make sure that all boost files are marked with eol-style native
* configure.ac: setup for new iostreams boost binary lib
* config/common.am: add boost iostreams variable
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13705 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/lyx2lyx/lyx2lyx_version.py.in
* lib/lyx2lyx/Makefile.am
Add lyx2lyx_version.py to distribution.
* lib/lyx2lyx/LyX.py
Use lyx version as the same version of lyx2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13626 a592a061-630c-0410-9148-cb99ea01b6c8
(create the lib directorty if it does not exist before running the script)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13417 a592a061-630c-0410-9148-cb99ea01b6c8
