inset.
If the reference is "sec:mysec", then this will output just "mysec".
This is what is needed, e.g., to use refstyle's range commands, e.g.,
\secrangeref{mysec1}{mysec2}
You *cannot* use:
\secrangeref{sec:mysec1}{sec:mysec2}
even if those are the actual labels.
Eventually, I'd like to add native support for this, but I'm a bit
frightened of trying to make the reference dialog support multiple
selections.
This entails a change of getAbbrAuthor to getAuthorList (the default is
still abbreviated with respect to MaxCiteItems, but the list can be, at
explicit request, shortened or full notwithstanding MaxCiteItems.
Next to the cmd name, introduce optional latex names (that might differ
from the cmd name) and aliases (that are "obsoleted by" the cmd).
This enhances portability between the engines.
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg198191.html
The root of the issue is in Buffer::reload() called during "Save As". After
loadLyXFile() there, all the insets have been deleted, and therefore the Inset
pointer GuiView::documentBufferView()->cursor().inset() is dangling. Immediately
after loadLyXFile(), reload() calls updateBuffer() which causes a segfault.
While debugging I got other segfaults caused by the same dangling Inset pointer
in Cursor, notably: 1) a trace identical to the second one from
<http://www.lyx.org/trac/ticket/10520>, and 2) a similar segfault in the
critical path after emergency saving (call to inMathed()).
Having to "refresh" by hand the inset pointer cache in CursorSlice is very
unsatisfactory, but there does not appears to be a consistent strategy for
managing these Inset pointers in CursorSlice.
From: "Joel A. Kulesza" <jkulesza@gmail.com>
Date: Mon, 24 Oct 2016 17:37:58 -0600
Subject: [PATCH] Add "Swap & Reverse" to math delimiter dialog
When "Keep matched" is unchecked, a button becomes enabled to "Swap &
Reverse" the left and right delimiters. This is expected to be of use
with line-wrapped equations featuring one or more set of delimiters that
break across the lines. When "Keep matched" is checked, the button is
visible but disabled.
The most common use case is expected to be the user entering a pair of
unmatched delimiters on the first line of an equation (e.g., "(" and
"(None)"), entering the inner text, going to the next line, and
inserting the opposite set of delimiters (e.g., "(None)" and ")").
This button will negate the need to find the correct corresponding
combination. However, it relies on the dialog's memory of the previous
unmatched set.
This change addresses Ticket #10457
-----------
Modifications by spitz to the original patch:
* Only enable the button if an unmatched pair is selected
* Consider l7n when locating the string "(None)"
* Add an accelerator and a tooltip to the dialog
* Simplify the code a bit
* b `british' (``inner quotation'')
* w >>swedishg>> ('inner quotation') ["g" = Guillemets]
* f <<french>> (``inner quotation'')
* i <<frenchin>> (<<inner quotation>>) ["in" = Imprimerie Nationale]
* r <<russian>> (,,inner quotation``)
Rename "french" to "swiss"
Also rename "single/double" to "secondary/primary" ("inner/outer" in
the UI) and "left/right" to "opening/closing". Note that the inset
identifier string is left as is ("s/d" and "l/r")
The current char-based implementation gets increasingly unreadable,
especially if styles are added that do not follow the strict
single-double paradigm.
The QTextLayout handling is terribly slow on Qt 4.8.7, but some
caching has been added in Qt5 that makes it much faster. For some
reason, it is not that slow with Qt 4.8.1.
Caches are introduced for the three following methods
* width(doctring), controlled by CACHE_METRICS_WIDTH. This cache already
existed, but the code has been cleaned up
* getTextLayout, controlled by CACHE_METRICS_QTEXTLAYOUT (disabled by
default on Qt5, which does its own caching). This is used for pos2x
and x2pos and now for drawing of text too. The previous code used a
trivial caching scheme of the last used QTextLayout, but now they
are properly kept in a QCache. Moreover, the cacheEnabled() property
is enabled for these QTextLayout object (not sure what this does).
* breakAt, controlled by CACHE_METRICS_BREAKAT. This is the only user
of QTextLayout which did not have some kind of caching already.
For some weird reasons related to Argument-dependent look-up, the
qHash(docstring) function has to be defined in std namespace, since
lyx::docstring is actually std::basic_string<wchar_t>.
[NOTE: this version has profiling hooks, enabled by commenting out the line
#define DISABLE_PMPROF
that should eventually be removed.]
It may happen (for example with on the fly spell checking) that
GuiFontMetrics::pos2x is called with a negative pos value. Add a
special case for this situation.
Fixes bug #10506
* endInsertRow was incorrectly placed before endResetModel, sometimes leading to
bad access by the view before it was informed that the model was empty. In
fact begin/endInsertRows were redundant with begin/endResetModel.
* Empty blocks are not supposed to be shown. This happened when moving the
cursor. A valid block is now selected intead. Due to the design/optimisation
of the model update, this requires a first update with an empty
model. Simplify the old code.
- Allow using logical values for icon sizes as the standard sizes may
differ among different icon sets
- Do not allow setting sizes smaller than smallIconSize
When the logical sizes differ and the icon set is changed, the correct
sizes are established only after a restart.
Addressing #10481.
This patch adds the new 'needauth' option for converters launching
external programs that are capable of running arbitrary code on behalf
of the user. These converters won't be run unless the user gives explicit
authorization, which is asked on-demand when the converter is about to
be run (question is not asked if the file is cached and calling the
converter is not needed).
The user prompt has a 3rd button so that he/she's not prompted again
for (any converter over) the same document (identified through
buffer->absFileName()).
Two preference options are added:
lyxrc.use_converter_needauth_forbidden disables any converter with
the 'needauth' option, which is meant to force user to an explicit
action via the preferences pane, before being able to use advanced
converters that can potentially bring security threats;
lyxrc.use_converter_needauth enables prompting the user for 'needauth'
converters, or bypasses the check if not enabled, falling back to the
previous behavior.
So, the first option is for maximum security, the second is for
maximum usability.
- Adds LFUNs for setting the icon size
- Adds icons sizes to the Toolbars menu
- Uses the Toolbars menu as application context menu
- The context menu can now be user defined in stdcontext.inc
Fixes ticket #10428.
Move math style to FontInfo and compute the font sizes for scriptstyle and
scriptscriptstyle according to standard proportions: 0.73 and 0.55.
This is simpler and more accurate. It also fixes the font size of
${\scriptscriptstyle {\textstyle A}}A$ which exposed the limitations of the
previous approach.
An overlong word containing a hyphen could be broken anywhere, instead of after
the hyphen.
Example: compare the line breaking of
aaaaa-aaaaa-aaaaa-aaaaa
with
aaa aaaaa-aaaaa-aaaaa-aaaaa
(with a very narrow window)
This also improves Chinese text in some situations (#10299)
1) Distinguish expanding characters from separators, to fit with Qt's notion of
expanding character which comes from the Unicode std. CountExpanders() is moved
to FontMetrics to fix a discrepancy with the duplicate implementation from
598f7e4a.
2) Make these expanders stretch on-screen proportionally to the em of the font.
If a row mixes large and small text, LyX let us see which spaces are set in the
bigger font.
3) Now that the stretch is defined in ems, add a limit such that an expander
never stretches more than 1.5em to avoid weird and hard to read justified lines.
4) Add a return boolean to setSeparatorExtraWidth for future use.
It turns out that Cursor::getFont() does not return a fully realized
font in some cases. This patch uses real_current_font instead, which
seems better anyway.
I suspect that all uses of getFont() should be removed, but this is
not code that I know well.
Fixes bug #10478.
This means that, when a string contains high-plane Unicode characters,
the length of a docstring and the corresponding QString will be
different: Qt will encode these characters using several 16bit
characters.
We have additionally to take into account QTBUG-25536, which implies
that sometimes qstring_to_ucs4(toqstr(s)) !=s. It is not clear whether
this bug can be a problem in other places.
Fixes bug #10443.
This fixes two particular problems
* with Qt5, it seems that QFontMetrics::width does not return the
correct value for some Arabic text; this patch uses QTextLayout
instead to compute a string width
* Likewise, the undocumented layout flags TextForceRightToLeft and
TextForceLeftToRight do not work with Arabic text; this patch uses
unicode override characters instead.
It might be that the two issues are related. In any case, they do not
happen with latin text where right-to-left direction is enforced. And
they do not happen with Qt4.
Additionally, remove some dead code in GuiFontMetrics::pos2x().
Fixes bug #10436.
This should avoid performance problems related to the window update machinery.
Moreover this fixes a crash introduced by 82808fea when closing a file.
Note that GuiWorkArea::Private already had a read_only_ member, but it
was unused.
Also rename LyXVC::vcname() to LyXVC::vcstatus() since it now contains
directly the UI string to be shown.
Now that there is a signal to inform the controller when the buffer view has
changed, it is no longer necessary to store a perishable pointer to a buffer
view in the dialog view. (Indeed, it was only really useful for checking whether
the new buffer view pointer was different from the old one.)
TODO: other dialogs should be audited for similar hazards.
