* Convert the kerning into a proper right margin for mathnormal, mathscr and
mathcal (fonts with \fontdimen2 == 0 as per rule 17 from TeXBook).
* Simulate the fact that characters in mathnormal fonts have a 0-width left
bearing.
* Implement subscript positioning in the case of rule 17 using negative italic
correction (kerning_).
File format change.
This allows for the relevant InsetCommand-based dialogs (such as
citation text before/after, Bibitem label, hyperlink name etc.)
to provide both the input of verbatim code or text that is transformed
to proper LaTeX code.
Some dialogs (Nomencl, Href) already had some methods (although they
could not be toggled), which are now centralized and streamlined.
The initial work of this patch has been done by Georg Baum (see
http://www.lyx.org/trac/attachment/ticket/2751/x.diff)
Fixes: #2751, #8227.
When using Qt stuff in breakAt, it may happen that the row is broken
after an hyphen (whereas the old code would only consider spaces).
The fact that we abuse the Row::right_boundary() property to detect when
a row should be flushed broke justification when a row is cut at an
hyphen.
Fix this by introducing a new Row::flushed() property and set it as needed.
The code that tries to decide whether it is worth splitting a given
text row element had a shortcoming: it did not take into account the
left margin of the new row that would be created.
The problem is that this left margin is not the same as the left
margin of the current row, because there can be for example
indentation effects.
To fix this problem, we pass the amount of available space on the
next row as a parameter of Row::shortenIfNeeded.
Note that there is no need to care about RtL row elements at this
point, since the bidi algorithm will be applied to the row
subsequently.
This avoids some duplicate code. Note that the return value of
Paragraph::getAlign had to be changed. I suspect it was set to char to
avoid reading one header file in Paragraph.h.
Whenever an argument delimiter is used inside the argument, the argument
needs to be grouped, that is
\cites({text (text) text})
or
\cite[{text [text] text}]
This fixes the original case reported in #2751 which is independent
from the general issue that the pre- and postnote field take literal
code.
Starting with Qt 5.6, setting the environment variable QT_SCALE_FACTOR
makes everything accordingly bigger. So, if QT_SCALE_FACTOR=1.2, all
text and GUI elements are rendered 20% bigger. However, if an application
does not account for this, everything will also look "blocky".
With this commit, all text and images will be scaled remaining sharp.
This works whether a HiDpi screen is used or not, but is mostly useful
with a HiDpi screen, as all GUI elements are more spaced apart and one
can use the mouse for selecting things without requiring a high precision.
These are biblatex-specific multicite commands that allow for multiple
pre- and postnotes, as in:
\cites(pre)(post)[pre1][post1]{key1}[pre2][post2]{key2}...
with an optional general pre- and postnote, which applies to the whole
list (like [][] in normal cite commands) and an optional pre- and
postnotes for each item, so that pagination can actually be specified in
multi-cite references, as in:
(cf. Miller 2015, 2; furthermore Smith 2013, 23-23; Jenkins 2012, 103,
also refer to chapter 6 in this book)
See the biblatex manual, sec. 3.8.3., for details.
File format change.
It seems that QTextLayout does not handle properly a single character
with 0 width. This breaks drawing of things like \not.
Actually the problem had been worked around already in lib/symbol. The
work around can therefore by removed now.
[additionally, remove extra spacing from \mapsto, \Mapsto]
Add a pixel gap around boxes.
When a box is invisible, its width should be null (but keep the weight
to avoid drawing problems (think empty sqrt in a macro).
Fixes missing outliner names in various situations. Now if the warning "Missing
outliner name" appears in the console, this correctly hints at an actual issue
with the layout.
Biblatex can be used with Japanese, but then, biber (not pbibtex) should
be used as processor.
I this context, bring the jbibtex UI in line with bibtex, allowing for
a selection of alternatives.
This is now set as default. It selects biber for Biblatex (with
fall-back to first bibtex8, then bibtex, if the former is not
installed), and bibtex for BibTeX-based engines.
With this, users do not normally need to care for the processor when
they switch cite engines.
The goal of this patch is to be able to properly remove the space
needed for markers in the case of insets that are inside macros and do
not need these markers. This was attempted at 9a9a6a8, but did not
work reliably.
To this end, the following simplifications are made:
* instead of drawing its own markers, each inset has a virtual method
marker() which prescribes either NO_MARKER, MARKER (normal bottom
marker) or MARKER2 (top and bottom marker). All explicit calls to
(draw|metrics)Markers(|2) are removed.
* the space necessary for the markers is now counted in the
before/above margins in the row structure. Therefore painting will
not happen at (x + 1, y), but just (x,y).
* the methods drawDecoration are removed.
* the helper methods InsetMath::(draw|metrics)Markers(|2) are removed
and replaced by a new function drawMarkers in MathRow.cpp.
Now the marker type is kept in the MathRow::Element object (and set to
NO_MARKER in not editable context) and the marker is accounted for in
MathRow::(metrics|draw).
Moreover, the extra pixel for the marker is taken on the before/After
space if possible. The marker will only require extra space when
before/after is 0.
See comment 168 of #8883 to understand what issues are fixed.
The rewrite of macro_nesting done at 0f15dcc6 was faulty, in
particular since the information should be available also at draw
time. To this end, we revert the patch of the said commit that removes
macro nesting information from MathRow::Element. In the next commit,
we will change the marker code so that MathRow::draw does not need the
nesting information.
Actually the code is now cleaner since the macro nesting stack of
MathRow::metrics can be removed.
When cloning InsetExternal, the tempname_ member of InsetExternalParams
has yet to be initialized. So, trying to remove it causes the warning
"QFile::remove: Empty or null file name".
No one seems to have been adding them `thematically', and it's too
hard to know how to do that, anyway. This at least makes it easier
to scan through the list.
I have verified, by re-generating LFUNs.lyx, that no significant
changes have been made here.
inset.
If the reference is "sec:mysec", then this will output just "mysec".
This is what is needed, e.g., to use refstyle's range commands, e.g.,
\secrangeref{mysec1}{mysec2}
You *cannot* use:
\secrangeref{sec:mysec1}{sec:mysec2}
even if those are the actual labels.
Eventually, I'd like to add native support for this, but I'm a bit
frightened of trying to make the reference dialog support multiple
selections.
This _must_ be increased for xhtml output of fullcite, else we get
fragmentary html code.
I am aware of the reason for this size limit (#8944) and have carefully
checked that this is not affected.
* ifentrytype:<type> whether we are a specific entry type (e.g. "book")
* export: export context (as opposed to dialog or workarea)
* second: whether we are in the second item of a list (useful when you
need to separate by " and " or ", and "
This entails a change of getAbbrAuthor to getAuthorList (the default is
still abbreviated with respect to MaxCiteItems, but the list can be, at
explicit request, shortened or full notwithstanding MaxCiteItems.
This will be used to transfer any single-cite related information from
anywhere to BiblioInfo (instead of the many strings and bools we use
until now).
This is a prerequisite for some forthcoming fixes and enhancements.
Copy-pasting $#\n$ from text to LyX gives the error message:
MathMacroArgument::MathMacroArgument: wrong Argument id
and it is not hard to get a crash soon after.
There are legitimate uses of # not followed by 1..9 in LaTeX and it is good to
parse them correctly when importing from LaTeX.
Following discussion on the list:
https://www.mail-archive.com/lyx-users@lists.lyx.org/msg103012.html
This defines a new behaviour for Ctrl[+Shift]+Arrow in math:
* Left/Right does not enter insets
* Left/Right jump groups of insets that have the same math class ("words")
* Enable Up/Down for consistency.
This was missing for macros defined in lib/symbols. This only affects the
equation splitting since global macros are always linearized. This fixes#10107.
Testcase: Define a math macro \AA, overriding the definition of \AA from
lib/symbols, then insert it in math mode.
* Before this commit: \text{\AA}, and \lyxmathsym{\AA} after deleting \text, but
displayed like \AA.
* After this commit: \text{\AA} is inserted, but one gets \AA after deleting
\text. The output is now consistent with the display and the meaning.
* Expected: only \AA is inserted. This is unfortuately not what one gets; for
this to work, the scope of the macros would need to be resolved upon creating
the inset.
About removing the changeEnsureMath in MathMacro::{metrics,draw} : as it is only
called in edition mode, it only happened for user macros for which no ensureMath
is needed anyway. ChangeEnsureMath should indeed be applied for global macros,
but since they are linearized there is no obvious place to call it.
Next to the cmd name, introduce optional latex names (that might differ
from the cmd name) and aliases (that are "obsoleted by" the cmd).
This enhances portability between the engines.
For biblatex, we need the file name as it was entered in the inset
(abs path, rel path, only file name) in order to resolve it properly
for the export (as in the BibTeX inset intself).
Therefore, we now store a pair<docstring, FileName>.
A FileNamePairList has been added to FileNameList for this purpose.
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg198191.html
The root of the issue is in Buffer::reload() called during "Save As". After
loadLyXFile() there, all the insets have been deleted, and therefore the Inset
pointer GuiView::documentBufferView()->cursor().inset() is dangling. Immediately
after loadLyXFile(), reload() calls updateBuffer() which causes a segfault.
While debugging I got other segfaults caused by the same dangling Inset pointer
in Cursor, notably: 1) a trace identical to the second one from
<http://www.lyx.org/trac/ticket/10520>, and 2) a similar segfault in the
critical path after emergency saving (call to inMathed()).
Having to "refresh" by hand the inset pointer cache in CursorSlice is very
unsatisfactory, but there does not appears to be a consistent strategy for
managing these Inset pointers in CursorSlice.
We use the more comprehensive cochineal package if available and fall
back to the crimson package, if not.
Math support is provided by means of newtxmath
Fixes: #9974, #9976
From: "Joel A. Kulesza" <jkulesza@gmail.com>
Date: Mon, 24 Oct 2016 17:37:58 -0600
Subject: [PATCH] Add "Swap & Reverse" to math delimiter dialog
When "Keep matched" is unchecked, a button becomes enabled to "Swap &
Reverse" the left and right delimiters. This is expected to be of use
with line-wrapped equations featuring one or more set of delimiters that
break across the lines. When "Keep matched" is checked, the button is
visible but disabled.
The most common use case is expected to be the user entering a pair of
unmatched delimiters on the first line of an equation (e.g., "(" and
"(None)"), entering the inner text, going to the next line, and
inserting the opposite set of delimiters (e.g., "(None)" and ")").
This button will negate the need to find the correct corresponding
combination. However, it relies on the dialog's memory of the previous
unmatched set.
This change addresses Ticket #10457
-----------
Modifications by spitz to the original patch:
* Only enable the button if an unmatched pair is selected
* Consider l7n when locating the string "(None)"
* Add an accelerator and a tooltip to the dialog
* Simplify the code a bit
Fixes: #8831
This introduces
* a new inset member isPartOfTextSequence() that returns
whether the inset produces something visible at the current position
in the text flow
* an isOpenPunctuation() test that returns whether a character is in the
'Punctuation, Open' unicode class. This is used instead of just checking
for two (Western, ASCII) opening brackets
It also fixes the isChar() and isLetter() value of InsetSpecialChar,
since some types have not been assigned correctly.
* b `british' (``inner quotation'')
* w >>swedishg>> ('inner quotation') ["g" = Guillemets]
* f <<french>> (``inner quotation'')
* i <<frenchin>> (<<inner quotation>>) ["in" = Imprimerie Nationale]
* r <<russian>> (,,inner quotation``)
Rename "french" to "swiss"
Also rename "single/double" to "secondary/primary" ("inner/outer" in
the UI) and "left/right" to "opening/closing". Note that the inset
identifier string is left as is ("s/d" and "l/r")
The current char-based implementation gets increasingly unreadable,
especially if styles are added that do not follow the strict
single-double paradigm.
The QTextLayout handling is terribly slow on Qt 4.8.7, but some
caching has been added in Qt5 that makes it much faster. For some
reason, it is not that slow with Qt 4.8.1.
Caches are introduced for the three following methods
* width(doctring), controlled by CACHE_METRICS_WIDTH. This cache already
existed, but the code has been cleaned up
* getTextLayout, controlled by CACHE_METRICS_QTEXTLAYOUT (disabled by
default on Qt5, which does its own caching). This is used for pos2x
and x2pos and now for drawing of text too. The previous code used a
trivial caching scheme of the last used QTextLayout, but now they
are properly kept in a QCache. Moreover, the cacheEnabled() property
is enabled for these QTextLayout object (not sure what this does).
* breakAt, controlled by CACHE_METRICS_BREAKAT. This is the only user
of QTextLayout which did not have some kind of caching already.
For some weird reasons related to Argument-dependent look-up, the
qHash(docstring) function has to be defined in std namespace, since
lyx::docstring is actually std::basic_string<wchar_t>.
[NOTE: this version has profiling hooks, enabled by commenting out the line
#define DISABLE_PMPROF
that should eventually be removed.]
The xfrac package is the "state of the art" for "split-level" (nice) fractions.
Character replacements look consistent, scale properly and fit in the line.
Fixes#5220.
A dot in the <lang><side><times> string means: keep current value.
This expert feature allows to change arbitrary quote features in one step.
E.g.,
inset-forall Quotes inset-modify changetype f..
=> change all quote insets to French style, maintaining current side
and times setting
inset-forall Quotes inset-modify changetype ..s
=> change all quote insets to single quotes, keeping style and times
inset-forall Quotes inset-modify changetype g.s
=> change all quote insets to German single quotes, keeping left/right
setting
Any idea where to document this?
