It is now possible opening documents that where manually moved to a
different location after they were saved and still produce an output.
Indeed, (hopefully) all needed included files are now still found.
When the moved document is saved again, all paths are accordingly updated.
Of course, for this to work, a document has to be saved in Format 490,
at least.
As an example, after converting the user guide to the last format, it can
be copied anywhere and opened without the need of adapting the paths of
included files or moving them to a proper place.
There is one glitch I am aware of. When moving a child document (but not
the master) the path to the master is correctly updated but it won't be
recognized as such. This is because LyX checks that the parent actually
includes this document but, of course, being the parent document not
touched, it appears not including this child. Anyway, it will also occur
when saving the child to a different location and the user is warned
on the terminal about this fact when the moved child is loaded.
However, there is no problem when it is the master that has been moved.
Previously, the format used for included pdf files was the same as for
document export via ps2pdf. This caused unwanted conversion routes, e.g.
export via odt->pdf instead of dvi->ps->pdf.
I renamed the format for included graphics and not for exported documents,
since otherwise the command line syntax for export would change. This would
require more adaptions for the users, since with the chosen solution the
custom converters are almost always changed correctly in prefs2prefs(),
so that only custom external templates need manual adjustement.
so we can write a limited amount when using this for TOC and
tooltip output.
This should solve the problem with slowness that Kornel noticed,
which was caused by our trying to write an entire plaintext
bibliography every time we updated the TOC. We did that because
he had a bibliography inside a branch, and we use plaintext for
creating the tooltip that goes with the branch list.
Other related bugs were fixed along the way. E.g., it turns out
that, if someone had an InsetInclude inside a branch, then we would
have been writing a *plaintext file* for that inset every time we
updated the TOC. I wonder if some of the other reports of slowness
we have received might be due to this kind of issue?
This commit does a bit more than fix selection, since it saves the full cursor state
in the undo stack. This means that undo now restores:
* the selection
* the current font
* transient mark (shall we keep this one?), logical position...
In order to do that, it introduces an intermediate class between Cursor and DotIterator: CursorData.
The new inheritance diagram is thus
DocIteraator -> CursorData -> Cursor
CursorData contains all the members of Cursor that define the current position, but not the stuff
related to current view of dispatch mechanism. It may make sense in the future to move members
between CursorData and Cursor and to move some member functions to CursorData.
Now UndoElement uses CursorData for cur_before and cur_after, but not for the cell. The undo API uses
also CursorData instead of DocIterator.
In this case, the inset parameters win in case there is any conflict. The only
exception is "type=eps", since I was too lazy to make the full keyval parser
of tex2lyx available to InsetGraphics in order to parse the special parameter.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40298 a592a061-630c-0410-9148-cb99ea01b6c8
file names with a proper one: Only replace dots in the base name, and only
request the lyxdot feature if it is needed. This is a partial fix of bug #7650.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40115 a592a061-630c-0410-9148-cb99ea01b6c8
(e.g., compressed dia, odg, sxd, ...). These need to be marked via the "zipped=native" flag in the RC file.
The old 'dia' configuration is automatically updated (it used to be hardcoded in the code, now it is handled
via the flag).
See also http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg170974.html
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39705 a592a061-630c-0410-9148-cb99ea01b6c8
documents and graphics were not copied to the export directory, since
the format passed to addExternalFile() was wrong.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38378 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
menus were (intentionally) missing, and it turns out they were needed.
Normally all invocations of INSET_MODIFY should trigger a recordUndo now.
Of course all cases have not been tested, but it should be working.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36770 a592a061-630c-0410-9148-cb99ea01b6c8
Refresh the file info, otherwise InsetGraphics::latex might still think that the file does not exist.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32355 a592a061-630c-0410-9148-cb99ea01b6c8
To make this really good, we'd want to be able to rotate, crop, etc, the
images, as well as convert them to suitable output formats. This should
not be too difficult, since we do this sort of thing for display,
anyway. But I don't myself know how to do it. Anyone?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32295 a592a061-630c-0410-9148-cb99ea01b6c8
At present, we do not do any sort of rotating, scaling, cropping, etc.
That should not be terribly hard to do, since we can just call ImageMagick
and get it to do it for us, but appropriate routines will have to be
written.
I'd be thrilled if someone else wanted to do that. ;-)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31975 a592a061-630c-0410-9148-cb99ea01b6c8
* Remove the EDITABLE enum,
* add functions hasSettings() for all insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29375 a592a061-630c-0410-9148-cb99ea01b6c8
