New method wrapParas() in support, deployed in various
insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29564 a592a061-630c-0410-9148-cb99ea01b6c8
* Remove the EDITABLE enum,
* add functions hasSettings() for all insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29375 a592a061-630c-0410-9148-cb99ea01b6c8
Synchronizing insets asserts with two views open
This finishes the change of http://www.lyx.org/trac/changeset/28587.
Replace the setButtonLabels functions that need a BufferView by buttonLabel functions. These functions modify the label at drawing time.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28610 a592a061-630c-0410-9148-cb99ea01b6c8
Synchronizing insets asserts with two views open
It changes the autoOpen_ member of InsetCollapsable into a map, such that an autoOpen value can be specified for each bufferView. Now, the assertion is avoided and insetCollapsable can be open in one bufferview and be closed in the other in very special cases that the cursor end up in a closed inset.
Compare with the MathMacro::editing_ member.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28573 a592a061-630c-0410-9148-cb99ea01b6c8
except when in math mode, where \boldsymbol is used instead of \mathbf.
Restore the previous binding of Ctrl-B and make sure that LFUN_FONT_BOLDSYMBOL,
now bound to Ctrl-Alt-B, can be toggled.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26418 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=4662
* InsetCollapsable.cpp (doDispatch): cleanup the handling of mouse-
related lfuns. The new behavior is as follows:
- everything that does not touch the button is sent to the insettext,
if it is visible, and delegated to enclosing inset instead
- mouse1-press is delegated to enclosing inset (which will set the
cursor)
- the rest is either acted upon or results on a mere cur.noUpdate().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26122 a592a061-630c-0410-9148-cb99ea01b6c8
There is probably a better solution somewhere, but it's not obvious what it is, and this solution doesn't do anything terrible. It leaves unaddressed the fact that the button does not get `hovered' if you open an inset via Ctrl-I, and then the mouse ends up inside it, and now the button will get `unhovered' whenver you collapse it, even if the mouse ends up over the button. But (i) my attempts to deal with these cases failed, (ii) they're not very annoying, (iii) they get `fixed' as soon as you move the mouse, and (iv) I'm not sure how complicated it's worth making this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24662 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- file format change to 324
* development/FORMAT:
- document file format change
* src/insets/InsetNewline.{cpp,h}:
- the former two separate derivates are now merged into one inset
with proper Params and Mailer. This simplifies the structure and allows for
switching between the two kinds.
* src/Text3.cpp:
- The newline insets are now being generated with
newline-insert [newline|linebreak]
* src/factory.cpp:
* src/Text.cpp:
- Newline inset is now a proper inset with opening and closing tag.
* src/FuncCode.h:
* src/LyXAction.cpp:
* src/Text3.cpp:
* src/insets/InsetCollapsable.cpp:
* src/insets/InsetTabular.cpp:
* src/mathed/InsetMathGrid.cpp:
* src/mathed/InsetMathHull.cpp:
- remove LFUN_NEW_LINE, LFUN_LINE_BREAK,
add LFUN_NEWLINE_INSERT
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_6.py:
- conversion and reversion routines for newline insets.
* lib/ui/stdmenus.inc:
* lib/ui/stdcontext.inc
- adapt menu and add context menu to switch between newpage variants.
* lib/bind/*.bind:
- adapt to new lfuns.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23966 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Buffer.cpp:
- file format change to 323
* development/FORMAT:
- document file format change
* src/insets/InsetNewpage.cpp:
- the former four separate derivates are now merged into one inset
with proper Params and Mailer. This simplifies the structure and allows for
switching between the various kinds.
* factory.cpp:
- The newpage insets are now being generated with
newpage-insert [newpage|pagebreak|clearpage|cleardoublepage]
* src/Text.cpp:
- Newpage inset is now a proper inset with opening and closing tag.
* src/FuncCode.h:
* src/LyXAction.cpp:
* src/Text3.cpp:
* src/insets/InsetCollapsable.cpp:
- remove LFUN_PAGEBREAK_INSERT, LFUN_CLEARPAGE_INSERT
and LFUN_CLEARDOUBLEPAGE_INSERT
* lib/lyx2lyx/LyX.py:
* lib/lyx2lyx/lyx_1_6.py:
- conversion and reversion routines for newpage insets.
* lib/ui/stdmenus.inc:
- adapt menu and add context menu to switch between newpage variants.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23942 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/InsetCollapsable.inc:
- specific context menu for conglomerate insets
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23940 a592a061-630c-0410-9148-cb99ea01b6c8
At this point, there are no simple TextClass objects in the main LyX code, and it is impossible to create them, since the TextClass constructor is protected. Only LayoutFile and DocumentClass objects can be constructed, and for the most part these are constructed only by their respective containers: BaseClassList and DocumentClassBundle. There is an exception: LayoutFile does have a public default constructor, but if anyone knows how to make it go away, please do.
There will be one or two more commits along these lines, but these will be simple renamings. For example, BaseClassList should be LayoutFileList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23343 a592a061-630c-0410-9148-cb99ea01b6c8
I've left the typedef in TextClassPtr.h. At the moment, it's kind of silly. But I've left it mostly because it helps to identify where the TextClass's stored in the TextClassBundle are used, and maybe it'd be worth having some sort of strong typedef like the one for BaseClassIndex here.
I need to check whether the textClass_ member of InsetCollapsable is needed now. I think not.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23232 a592a061-630c-0410-9148-cb99ea01b6c8
Sorry, Andre, but this broke not only the modules stuff but the general handling of TextClasses. I'm not opposed to doing this sort of thing, but it's going to be a little more complicated. I'll do it when I get a bit of time, or I can explain what the issue is here if you want to do it.
I'll separately re-commit some of the cleanup here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23189 a592a061-630c-0410-9148-cb99ea01b6c8
Also a few cosmetical changes where I xould not resist.
Would be nice if the 'modules people' could verify that their baby
is strill alive...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23154 a592a061-630c-0410-9148-cb99ea01b6c8
This one just moves the Decoration enum into InsetLayout, changing the names
to avoid possible conflicts now that it is in the lyx namespace.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23135 a592a061-630c-0410-9148-cb99ea01b6c8
Here, we move TextClass::readInsetLayout() to InsetLayout::read().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23117 a592a061-630c-0410-9148-cb99ea01b6c8
In this commit, we do the minimal amount of work necessary to protect our data.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23116 a592a061-630c-0410-9148-cb99ea01b6c8
NOTE: Some cleanup is needed here, and I'll do it shortly. Doing it properly, though, requires making InsetLayout a proper class. (At the moment, it's just a C-style struct.) That should be committed separately.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23103 a592a061-630c-0410-9148-cb99ea01b6c8
from the one posted to the list.
The basic idea has two parts. First, we hard code an "empty layout"
(called PlainLayout, for want of a better name) in TextClass and read it
before doing anything else. It can therefore be customized by classes,
if they want---say, to make it left-aligned. Second, InsetText's are
divided into three types: (i) normal ones, that use the "default" layout
defined by the text class; (ii) highly restrictive ones, such as ERT and
(not quite an inset) table cells, which demand the empty layout; (iii)
middling ones, which default to an empty layout and use the empty layout
in place of the default. (This is so we don't get the same problem we
had with ERT in e.g. footnotes.) The type of inset is signaled by new
methods InsetText::forceEmptyLayout() and InsetText::useEmptyLayout().
(The latter might better be called: useEmptyLayoutInsteadOfDefault(),
but that's silly.) The old InsetText::forceDefaultParagraphs() has been
split into these, plus a new method InsetText::allowParagraphCustomization().
A lot of the changes just adapt to this change.
The other big change is in GuiToolbar: We want to show LyXDefault and
the "default" layout only when they're active.
There are a handful of places where I'm not entirely sure whether we
should be using forceEmptyLayout or !allowParagraphCustomization() or
both. The InsetCaption is one of these. These places, and some others,
are marked with FIXMEs, so I'd appreciate it if people would search
through the patch and let me know whether these need changing. If they
don't, the FIXMEs can be deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22966 a592a061-630c-0410-9148-cb99ea01b6c8
whether the data structure outlives the pointer:
InsetLayouts are really owned by the corresponding TextClass. So
keep the TextClass alive by keeping a TextClassPtr around for the
pointers lifetime. This fixes Bug #4538.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22782 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
- fileformat change
- tex2lyx support
- rename LFUN_BREAK_LINE to LFUN_NEW_LINE because this is what the lfun does and to avoid confusions
- new menu entry
- new shortcut C-S-Return
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21778 a592a061-630c-0410-9148-cb99ea01b6c8
- rename former "pagebreak" to "newpage" since it produces a \newpage
- new LFUN
- menu entry
- tex2lyx support
- fileformat change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21732 a592a061-630c-0410-9148-cb99ea01b6c8
