The old hyphen replacement code did not convert hyphens if the condition
style.pass_thru || runparams.pass_thru
was met. style.pass_thru got set from inset owner (isPassThru()). Therefore
we have to consider this for the new replacement code as well.
Previously, consecutive dashes in .lyx files were combined to endash and emdash
in some cases, and in other cases they were output as is. This made the code
complicated, and resulted in inconsitencies ((bug #3647).
Now, a dash in a .lyx file is always a dash in the output, for all flavours.
The special handling is moved to the input side, so that you still get an
endash if you type two hyphens. If needed, this can be changed or made
customizable without the need to update the file format again. Many thanks
for the fruitful mailing list dicsussion, which contributed significantly to
the final version.
lyxfind.cpp(findNextChange, findPreviousChange, findChange, selectChange): factor the change-selection part out of the change-finding part
Text.cpp (acceptOrRejectChanges): call only selectChange
The real problem is the encoding of latex_language: It is hardcoded to latin1,
but InsetListig uses the currently active encoding. Therefore, we cannot tell
whether any given character wil be encodable or not, and we should not prevent
non-ACII characters.
In the future, we need to make the encoding of latex_language dynamic, so that
it always represents the currently active encoding. Then, we could do the
correct check both for listings and ERT. For now, I simply disabled the
encoding check for listings, which also means that bug 9012 might occur in
other cases for listings, but this is less important than bug 9102.
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
In the current code each paragraph contains a map<Language,
WordList*>, which means that it contains a full copy of the language
object. Since these objects contain translation tables nowadays, this
is a very bad idea.
This patch simply replaces the Language key by a string.
When loading the Userguide on linux/x86_64, the total memory
consumption decreases from 36.27MB to 31.50MB.
Currently you can easily create an uncompilable document if you insert
non-ASCII characters in a pass-through paragraph (e.g. ERT inset or verbatim
style). This commit prevents entering these characters directly, but of
course they can still be inserted via tricks, e.g. changing a standard
paragraph to verbatim. A complete fix would handle this case as well,
and also change the fixed latin1 encoding of latex_language to a dynamic one,
so that a verbatim paragraph can contain any character that is encodable in
the encoding of its environment.
(unless it's already there, in which case it should move to the end of the next paragraph).
Change the preference setting name (mac_like_word_movement to mac_like_cursor_movement)
to better reflect its function.
Patch and description from Bennett Helm
This is mostly unused private class members.
There are also a few unused functions that got #if'ed out. I never know in this case whether the code should be nuked.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
Provide functions for translating to the LyX name
of an encoding from either a LaTeX name or an Iconv
name, with the possibility to specify the package.
This is in anticipation of changing to use the LyX
name of the encoding in the .lyx file format and
allowing multiple lib/encodings entries to have
the same LaTeX name (but different packages!).
The tex2lyx parser needs to worry about the iconv
name of the input encoding, so store that instead
of the latex name.
Only the first paragraph in those sequences goes into the TOC, since the environment is merged.
This is needed to handle the forthcoming beamer environments properly in the outliner.
In the existing code for setting layout of pragraph parameters,
Text::undoSpan is used to "guess" which paragraphs should be saved in Undo.
With this patch the approach is more precise: before every explicit change
to a paragraph, a Cursor::recordUndo call is inserted. This is much more robust than trying to guess.
In particular, we do not look at depth changes at all, since they are now
handled in updateBuffer since #8159 has been fixed.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
Text::outerFont looks recursively for paragraphs before the current one
which has a lower depth. If such a paragraph cannot be found, depthHook
and outerHook return the current paragraph. As such, we end up in an
infinite loop. So, if we find a par_depth that was the same as the
previous one, we apparently can't find a suitable paragraph and we should
quit the loop.
- Interpret argument of LFUN_SPACE_INSERT correctly
- Use InsetMathSpace instead of InsetMathSpecialChar for "\ " (bug # 7728)
- Use InsetMathSpace instead of InsetMathChar for ~ (bug # 7728).
This fixes also the display in LyX (previously a literal ~ was displayed).
Using InsetMathSpace enables also the "Insert Formatting" menu entries.
No file format change is needed, since the LaTeX export is unchanged.
Note that there are still some bugs related to spaces in math:
#7746, #7747, #7749, #7842
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39947 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38978 a592a061-630c-0410-9148-cb99ea01b6c8
We clear the refernce cache so that we won't get conflicts with labels
that get pasted into the buffer. We should update this before its being
empty matters. If not (i.e., if we encounter bugs), then this should
instead be:
cur.buffer().updateBuffer();
But we'll try the cheaper solution in trunk.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38680 a592a061-630c-0410-9148-cb99ea01b6c8
It must have been wrong before the updateBuffer() refactoring, too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38676 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
In particular, it makes paragraph breaks generate single \n in latex output
when ParbreakIsNewline is true
This means that it is not necessary anymore to use newlines to break lines.
Plain paragraph breaks can be used instead, like is done now in ERT/Listings.
This is mainly aimed at sweave support.
lyx2lyx support courtesy of Richard Heck
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36163 a592a061-630c-0410-9148-cb99ea01b6c8
Computes a hash value for the authors when using change tracking.
Text.cpp, BufferParams.h, Author.h:
Change unsigned int to int because the hash values can be negative.
lyx2lyx:
Allow to convert negative author_ids.
See also: r30756.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36134 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
We need to reject the changes in when copying from a fully deleted section.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34583 a592a061-630c-0410-9148-cb99ea01b6c8
more. Worse, it was being used inconsistently. And we don't really need
it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33786 a592a061-630c-0410-9148-cb99ea01b6c8
indicates what prefix to use when constructing formatted references.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33784 a592a061-630c-0410-9148-cb99ea01b6c8
KeepEmpty is false:
* if depth>0, decrease depth
* if depth = 0 reset layout to standard
This implments a hopefully intuitive way of getting out of enumerations and
other environments.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33088 a592a061-630c-0410-9148-cb99ea01b6c8
weren't taken into account. So the paragraph id management is now going
back to Paragraph.cpp.
Sorry for the trouble.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32788 a592a061-630c-0410-9148-cb99ea01b6c8
#6415
Enrico please verify that reverse dvi is fixed.
* Text and InsetText: create two private constructors and transfer some
initialisation code from InsetText.
* Paragraph: id generation is transfered to Text. May be transfered to
Buffer in the future, we'll see.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32766 a592a061-630c-0410-9148-cb99ea01b6c8
to FontInfo.*
This allows tex2lyx to use the plain FontInfo object (via Layout), and to remove
several '#ifdef TEX2LYX' in the code
Reorder a bit the makefile in tex2lyx
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31772 a592a061-630c-0410-9148-cb99ea01b6c8
Set Buffer to Insets when reading a document. InsetSpecialChar and InsetLine are the only Insets that are instantiated in readParToken.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31238 a592a061-630c-0410-9148-cb99ea01b6c8
Move isFullyDeleted() to static function in CutAndPaste.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30956 a592a061-630c-0410-9148-cb99ea01b6c8
- perform updateLabels also after dissolving an empty inset (bug 6003).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30771 a592a061-630c-0410-9148-cb99ea01b6c8
This patch makes sure that there are minimal changes when loading and saving a file with change tracking.
- the authors are assigned a buffer_id, such that when the file is saved, they get the same id,
- the authorlist is sorted according to the buffer_id,
- the buffer_id is written to the file in the author list (file format change)
- the ids start with 1, because 0 is internally reserved for the current Author,
- when writing the file, the current author is assigned an id if he didn't already have it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30756 a592a061-630c-0410-9148-cb99ea01b6c8
accepting changes in a clipboard copy (CutAndPaste.cpp), we set the buffer
of insets (and we reset them later).
Doing this makes sense because we know this is the only operation on these
out-of-document paragraphs that will require access to a buffer.
Also, this commit gets rid of one explicit test against ERT_CODE and
LISTING_CODE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30623 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, insets in cut stack do not have a buffer, and therefore cannot
acess to buffer parameters. What is annoying here is that acceptChanges
requires this buffer params only to be able to read a font in moveItem,
in order to read the buffer language, and I doubt this is really needed...
Another change in this patch is that Inset::getLayout now returns a
plainLayout when the inset does not have a buffer_. This fixes a remaining
crash where dEPM reads isFreeSpacing() for an inset in the clipboard, but
this looks like a fragile situation. And it will not do the right thing when
doing depm in a freespacing inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30605 a592a061-630c-0410-9148-cb99ea01b6c8
* allows the selection of a whole cell with shift+key
* shift-movement between empty cells with a single keystroke
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28385 a592a061-630c-0410-9148-cb99ea01b6c8
