so we can write a limited amount when using this for TOC and
tooltip output.
This should solve the problem with slowness that Kornel noticed,
which was caused by our trying to write an entire plaintext
bibliography every time we updated the TOC. We did that because
he had a bibliography inside a branch, and we use plaintext for
creating the tooltip that goes with the branch list.
Other related bugs were fixed along the way. E.g., it turns out
that, if someone had an InsetInclude inside a branch, then we would
have been writing a *plaintext file* for that inset every time we
updated the TOC. I wonder if some of the other reports of slowness
we have received might be due to this kind of issue?
This restores \input@path handling, which turns out to be necessary, as
the TEXINPUTS mechanism is not used with relative paths. It turns out
that both methods must be used, because \input@path does not work in all
cases (most notably with tikz).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39918 a592a061-630c-0410-9148-cb99ea01b6c8
Read the comment of odocstream in src/support/docstream.h if you want to
know why this fix is correct.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38335 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
all types requiring the exact same code, as suggested by Tommaso.
This allows to simply add a single-line instantiation declaration
if there's the need of adding another type requiring the same code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37366 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
// std::numpunct has a hardcoded dllimport in definition, but we wanna it with 32 bit
// so we can't import it and must define it but then the compiler complains.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34262 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::bind for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34257 a592a061-630c-0410-9148-cb99ea01b6c8
tex2lyx woes under windows. It may also help chktex under windows
(does it works currently?)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29361 a592a061-630c-0410-9148-cb99ea01b6c8
- odocfstream: properly fix plaintext output by getting rid of ctor with std::string argument as this can be mixed up with std::ofstream(std::string) ctor where the argument is a file. UTF8 is now the default encoding.
- PreviewLoader::Impl::startLoading(): catch another potential iconv exception.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22332 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstream.{cpp,h}:
Move insertion operator for char types from docstream.h to
docstream.cpp and compile it only when USE_WCHAR_T is not defined.
* src/support/strfwd.h:
Implement forward declarations in standard C++ way.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21513 a592a061-630c-0410-9148-cb99ea01b6c8
encodings) more fine grained: From paragraph level to individual character
level. The inputenc package supports that since at least 2000.
* src/insets/insetbase.h
(latex): Document the differences between output to a string stream
and a file stream
* src/buffer.h
(writeLaTeXSource): ditto
* src/output_latex.h
(latexParagraphs): ditto
(switchEncoding): new function to change the encoding of a stream
(and output \inputencoding commands)
* src/paragraph_pimpl.C
(Paragraph::Pimpl::simpleTeXSpecialC): Adjust to latexWriteEndChanges
changes
* src/support/docstream.[Ch]
(setEncoding, operator<<): New stream modifier that changes the
encoding of file streams
* src/lyxfont.[Ch]
(LyXFont::latexWriteStartChanges): Change stream encoding if needed
(LyXFont::latexWriteEndChanges): Change stream encoding if needed
* src/lyxfont.h
(public:):
* src/paragraph.C
(Paragraph::simpleTeXOnePar): Adjust to latexWriteStartChanges and latexWriteEndChanges changes
(bool Paragraph::simpleTeXOnePar):
(bool Paragraph::simpleTeXOnePar):
(bool Paragraph::simpleTeXOnePar):
(bool Paragraph::simpleTeXOnePar):
(bool Paragraph::simpleTeXOnePar):
* src/output_latex.C
(TeXOnePar): Remove the ugly hack to for wencoding changes and use
switchEncoding instead. A nice side effect is that the old hack would
not work if the main language encoding is latin1 and a character
would be mapped to a cedilla in the "fake ucs4" encoding, because
iconv refuses to convert such a character to latin1, although it
exists in latin1 (it wants to attach it to a base character).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16633 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.h
(encoding_table): remove, this is no longer needed with unicode
(iconvName_): new member: name of the encoding in iconv syntax
* src/exporter.C
(Exporter::Export): Use return value of Buffer::makeLaTeXFile
* src/buffer.[Ch]
(Buffer::makeLaTeXFile): return whether the file has been created
successfully
* src/buffer.C
(Buffer::makeLaTeXFile): Use a docstream that converts to the correct
encoding
Display an error dialog is something went wrong
* src/bufferparams.C
(BufferParams::writeLaTeX): Undo the utf8 inputenc hack
* src/frontends/qt4/QDocumentDialog.C: Add some FIXMEs
* src/support/unicode.[Ch]
(eightbit_to_ucs4): New conversion function
(ucs4_to_eightbit): New conversion function
* src/support/docstream.[Ch]
(utf8_codecvt_facet_exception): Move to header and rename to
iconv_codecvt_facet_exception
(odocfstream): Take the encoding as argument
* src/support/docstream.C
(utf8_codecvt_facet): Generalize to other encodings than utf8 and
rename to iconv_codecvt_facet
* src/encoding.C: Remove obsolete tables
* src/output_latex.C
(TeXOnePar): Convert the paragraph to different encoding if needed
* lib/encodings: Remove obsolete tables
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15564 a592a061-630c-0410-9148-cb99ea01b6c8
export (e.g. the ToC) and the navigate menu.
* src/insets/insetbase.h
(InsetBase::plaintext): output to a docstream
(InsetBase::textString): ditto
* src/mathed/TextPainter.h
(TextPainter::show): ditto
* src/support/docstream.[Ch] New file and string streams for
docstring. The file streams convert to UTF8 on the fly.
* many more files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15301 a592a061-630c-0410-9148-cb99ea01b6c8
