Files, which contain names of ctest-tests controling
whether they should be inverted, or ignored.
We have two such files ATM: revertedTests + ignoredTests
These tests load the .lyx files to see if there are
any parsing errors or other LyX errors/warnings. The
tests fail if LyX writes a line to STDERR that does not
match any of the regexes stored in filterCheckWarnings.
Thanks to Kornel for the CMake expertise and corrections.
This patch was written jointly with him.
a) test export/templates/ectaart_pdf5 removed, because
of incompatibility between ectart.cls and luatex.sty
b) renamed some tests to reflect their purpose
tex2lyx2lyx/roundtrip/ => tex2lyx/cmplyx/
# the tests are comparing files written by lyx (not by tex2lyx)
autotests/ => keytest/
# we are testing reactions of lyx to some key strokes
c) add tests for lyx2lyx. This is rather rudimental, in that it only
checks for created output, error codes and error output.
d) use correct environment variable to set up the userdir for testing
Some export test are known to fail. Checking them every time is cumbersome.
Now, the tests marked in file revertedTests will invert the success condition
and mark the test as INVERTED_SEE-README.ctest.
If some of the tests in revertedTests fails, this is good, and the testname
can be removed from it.
If no libraries are found, XVFBDLIBS is not initialized and the command "list(REMOVE_DUPLICATES XVFBDLIBS)" fails. So, initialize XVFBDLIBS beforehand.
(unless it's already there, in which case it should move to the end of the next paragraph).
Change the preference setting name (mac_like_word_movement to mac_like_cursor_movement)
to better reflect its function.
Patch and description from Bennett Helm
* InsetBox and GuiBox: Use proper empty length instead of the broken -9.99col% trick
* some slight changes to the logic of GuiBox to make sure that values are set as needed.
* lengthToWidget(): handle properly the empty length case. All the other related Qt helpers did it already, it was probably an oversight. Also set the default_unit parameter as optional (not needed in this patch actually, but I got carried away :)
* allow generating LaTeX code for an empty length, since some broken code does that.
The default citation capability of LaTeX is not a true numerical
citation engine, rather it uses a mixture of labels/numbers. Thus
we now distinguish them: "numerical" always increments the bibitem
counter and uses its value as a numerical citation label, while
"default" only uses the bibitem counter when no label is provided.
LyX file format incremented to 471.
I see lot of errors like:
The following string was expected to be '.cpp' or '.h':
LyX.cpp: In member function 'void lyx::LyX::printError(const lyx::ErrorItem&)':
Warning: the error was not parsed correctly.
The following string was expected to be '.cpp' or '.h':
LyX.cpp: In function 'void lyx::error_handler(int)':
These should be used if any new style needs to be introduced in the stable
2.1 series: If the ForceLocal flag of the style is set, it will always be
written to the document header, so that even older 2.1 versions can read
and correctly output the document.
The script does the following:
All .cpp and .h files in the current directory and subdirectories
are checked to see which include statements could be omitted without
causing a build error.
Many of these omissions would not be desired. For example, currently
if you don't include Undo.h in Undo.cpp, there is no error because
Undo.h is included in Cursor.h which is included in Undo.cpp. But
clearly we do want to include Undo.h in Undo.cpp.
See #6305.
- fileformat change
- it was a pity that LyX did not yet support a simple rectangular frame without a defined width but LyX did this for e.g. oval frames
- \fbox and \mbox often occur in TeX files and can now be imported
* Powerdot now also uses the native overlay item arguments
* a list option argument is finally available
* \pause natively supported (like in beamer)
* support for \onslide (via InsetFlex)
* support for \twocolumn
File format change.
With this commit, old beamer frames are converted to new ones. The old styles are removed (including the infamous \lyxframe).
This should be tested with as much beamer documents as possible (I have already done so), also, tex2lyx now probably produces invalid LyX files.
- the installer does nw the job of replacing the magyar.ldf with the fixed version [http://wiki.lyx.org/Windows/Hungarian]
- install the Mongolian hyphenation pattern to MiKTeX
- update eLyXer
- update to new MiKTeX installer that fixes a bug with updating Packages
- don't ship cbgreek because it is so huge that its download would last 10 minutes or more
The xhtml format is always tested, regardless of the default format.
Without this, if the default format is xhtml, CMake gives an error
when trying to add the xhtml test because it was already added.
- the installer will now recognize an already installed 64bit MiKTeX
- the installer will still install 32bit MiKTeX for new installations because biblatex does not yet work with 64bit MiKTeX
- Use the LyX name of encodings instead of the LaTeX names.
The LyX name must be unique, while the name used by LaTeX
not necessarily, e.g. different packages might implement
support for the same encoding.
- Rename koi8 to koi8-r, so that the LyX and LaTeX names match.
- Rename euc-jp-plain to euc-jp-platex, jis-plain to jis-platex
and shift-jis-plain to shift-jis-platex.
- Add utf8-platex encoding (fixes#8408).
LyX file format incremented to 463.
Now all export tests can be run with:
ctest -R "export"
Only export tests for manuals can be run with:
ctest -R "export/doc"
And only export tests for examples can be run with:
ctest -R "export/examples"
Instead of 'autotests/export/doc/' export tests are prefixed
with 'export/doc/'. This has the advantage of the name better
reflecting the test (export tests are not autotests), but has a
disadvantage in that the old name gave a better idea of where the
export test scripts are located (in the autotests directory).
The current code is not able to unset an environment variable, only to set it to an empty value. This patch refactors a bit the Message class and uses a new EnvChanger helper class that allows to change temporarily an environment variable and that is able to unset variables if needed.
The patch also adds new functions hasEnv and unsetEnv in environment.cpp.
Open issues:
* there may be systems where unsetenv is not available and putenv("name=") does not do the right thing;
* unsetenv may lead to leaks on some platforms.
* when using unsetenv, we may need to remove strings from the internal map that setEnv uses.
This file documents which tests are expected to fail. It can be used
to quickly tell if a regression has occurred. This is also useful when
first running tests to get an idea of whether some tests are failing
because of missing dependencies.
keytest.py now only prints one time the command that it is executing for
an assert. The command is already printed in the function responsible
for executing it, so it is not necessary to print the command before
calling that function.
* some functionality is in new modules now
new header locations and library names: QtConcurrent and QtWidgets
* method setResizeMode is renamed to setSectionResizeMode
* deprecated QAbstractItemModel::reset() is dropped now
* platform specific code like QApplication::syncX() is not common anymore
* QString::fromAscii() is dropped now
* some QDesktopServices methods has been moved to QStandardPaths
This test should fail because #7673 is not yet fixed in trunk.
Note that it is fixed in branch.
This is the first autotest that uses an existing .lyx file,
bug-7673.lyx.
If the test opens an existing .lyx file and crashes, it will leave
around a .emergency file. If a test with that same name is run again,
LyX will try to recover the .emergency file, which could throw
off the test.
This is implemented for both CMake and autotools.
LyX 2.0.x supports currently 147 LaTeX-packages. When LyX is first installed on a PC it took therefore about 10 minutes to install all supported and required packages. With the new installation method the installation speed only depends on the Internet speed and lasts with an average bandwidth now only 3.5 minutes.
(chkconfig.ltx asks LaTeX for each package separately and after each package installation the file name database of LaTeX was rebuild. And that cost a lot of time/CPU power)
To reproduce some bugs, tests need to open an existing LyX file. This
is now possible with CMake and is consistent with testing under
autotools in the sense that the .lyx file is referred to in the test
by being in the parent directory.
If the test is named bug-XXXX-in.txt and there exists a file
bug-XXXX.lyx, that file will be copied to the parent directory of
out-home in the build directory.
LaTeX.nsh:
- fix a MiKTeX configuration Problem on 64bit Windows issue discovered in #8417
- don't overwrite MiKTeX's package repository the user might have set purposely
- remove some unused code and simplify some code
- update to JabRef 2.9.2
- LaTeX.nsh: fixe http://nsis.sourceforge.net/Download
- settings.nsh: adapt path so that one needs to adapt less when using the installer source zip file
- add a readme how to build the installer
Some macros defined by wasysym.sty work only in text mode: They either
produce an error in math mode, or wrong output. These symbols are now marked
as text symbols, so that no \ensuremath is created for LaTeX export if they
appear inside \text{}, and the correct images are created.
development/tools/generate_symbols_images.py now checks for each symbol in
lib/symbols whether its image is listed in lib/Makefile.am and whether it has
a toolbar entry in lib/ui/stdtoolbars.inc.
- LaTeX.nsh: assure that if MiKTeX is installed for all users also the missing packages will be installed during the configuration for all users
- configure.nsh: run configure.py twice to assure that really all missing packages are checked/installed
- LaTeX.nsh: fix bug that installer stopped working if LyX was installed the first time on a computer
- init.nsh:
- fix failing installation of Slovakian spellcheck dictionary
- expand list of available dictionaries as requested by users
- dictionaries.nsh: prevent case that the installer could run an infinite loop if the installation of dictionaries was interrupted
- settings.nsh: use a HTTP repository for MiKTeX instead of FTP because many companies deny FTP access by default in their firewalls
The old layouts are still there (marked as deprecated). The new ones are more or less correctly reverted (polishment required), but the old ones not yet converted to the new. Once this is done, a further file format change should be made.
The fix is basically mechanical, the additional code for fraction like insets
with three arguments was stolen from \unitfrac. As any math package,
stackrel.sty needs a buffer parameter to switch it off.
I also added the two stackrel flavours to the toolbar.
The \frametitle command is less convenient to use than the \frame argument, but it provides more options (overlay/action and short title). We thus provide this additionally to the option, like beamer itself does.
This has a list-like structure (with \onslide item commands). The previous implementation was rather useless, since it required lots of ERT. Since the new implementation is so different, we use ERT for conersion/reversion.
The lyx2lyx routines are not yet perfect, though.
The stmaryrd package adds support for lots of math symbols, using a font
designed to accompany the computer modern fonts. The changes in detail:
- Fix generate_symbols_list.py to work with stmaryrd.sty. It loooks like it
was automatically translated from a perl version and never used.
- Generate the new symbols in lib/symbols using generate_symbols_list.py and
add some manual adjustments
- Generate stmary10.ttf by a simple ttf export from stmary10.sfd with fontforge
- Add license info for stmary10.ttf
- Create a test file with all symbols from stmaryrd.sty. Actually it would be
nice to have this for the other fonts as well.
- The mechanics: lyx2lyx, tex2lyx, font machinery etc.
This patch puts all projects into subfolders (at least for MSVS). In this
way, there is a better overview (especially if the number of test projects
will be increasing).
Many test are not running, but if changed the '-dbg xxx' to '-dbg any'
then all of sudden they pass ...
(The buffered output of lyx is often disrupted too early with 'kill -9',
so the expected data are not available for the appropriate test)
Now that we have module support for literate programming, it is possible to do a noweb cleanup. This is basically a patch from Kayvan Sylvan:
- get rid of literate-xxx classes
- rename Scrap to Chunk, since this is the name noweb doc uses (Scrap is from nuweb)
- update lyx file format and add lyx2lyx support for gettting rid of literate-xxx classes
- update documentation
On the top of it, update tex2lyx to
- avoid creating files with literate-xxx class
- fix conflict between parsing << as a quote and parsing it as a Chunk
- create Chunk layouts instead of Scrap ones.
This is already done by the program pdfview every time it is called. This additionally fixes the bug that viewing PDF files could fail if Acrobat was not the default PDF viewer of the system while LyX was installed, but became later the default PDF viewer.
