This makes the script usable on windows and speeds it up by an order of
magnitude, since no new process needs to be forked for each layout file.
It also does not conevrt .old files again.
FileName::tempName() created a new temp file name by using qt to create a
temporary file with a unique name, and then deleting that file and returning
the name. This was unsafe, since other processes or even other threads of the
running LyX could create files with the same name between deletion and then
using the temp name.
This is fixed by using the TempFile class instead. As a side effect, a few
cases where the temp files were not deleted after usage were fixed as well.
The only place that is still unsafe is createTmpDir().
This is needed so that the new format number is actually used. Since the
conversion is a noop I did not update the layout files (more updates will
come).
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
This makes the defaults of Inset::inheritFont() and Inset::resetFontEdit()
compatible. There is no user visible change except for the Chunk inset which
does not produce invalid LaTeX after editing operations anymore.
This is the safe version for 2.1.0, for later there are still open questions:
- All insets with ResetsFont true should be audited: Is this really needed,
or do they show similar editing problems as the Chunk inset?
- Does inheritFont() need to be customizable in the layout file as well?
- Is resetFontEdit() != !inheritFont() needed at all?
I did not use change tracking for the docs, since I updated all existing
translations.
The default citation capability of LaTeX is not a true numerical
citation engine, rather it uses a mixture of labels/numbers. Thus
we now distinguish them: "numerical" always increments the bibitem
counter and uses its value as a numerical citation label, while
"default" only uses the bibitem counter when no label is provided.
LyX file format incremented to 471.
These should be used if any new style needs to be introduced in the stable
2.1 series: If the ForceLocal flag of the style is set, it will always be
written to the document header, so that even older 2.1 versions can read
and correctly output the document.
each failure.
There are several places I was not sure what to do. These are marked
by comments beginning "LASSERT:" so they can be found easily. At the
moment, they are at:
Author.cpp:105: // LASSERT: What should we do here?
Author.cpp:121: // LASSERT: What should we do here?
Buffer.cpp:4525: // LASSERT: Is it safe to continue here, or should we just return?
Cursor.cpp:345: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:403: // LASSERT: Is it safe to continue here, or should we return?
Cursor.cpp:1143: // LASSERT: There have been several bugs around this code, that seem
CursorSlice.cpp:83: // LASSERT: This should only ever be called from an InsetMath.
CursorSlice.cpp:92: // LASSERT: This should only ever be called from an InsetMath.
LayoutFile.cpp:303: // LASSERT: Why would this fail?
Text.cpp:995: // LASSERT: Is it safe to continue here?
objects. The problem that led to the leak is that these objects can be held in
memory long after the Buffer that created them is gone, mostly due to their
use in the CutStack. So they were previously held in a storage facility, the
DocumentClassBundle. Unfortunately, they were now being created too often,
especially by cloning. It's not really a leak, because they're accessible, but
we weren't ever destroying them.
This new approach uses a shared_ptr instead.
Thanks to Vincent for pointing out const_pointer_cast.
While cppcheck did not turn out any suspicious error messages, using
the "performance" flag highlighted several nitpicks in three categories
* do not use it++ for iterators, ++it is better
* do not use size() to test for emptyness, empty() is here
* do not use "const T" as a function parameter, "const & T" is better
I doubt that any of these is a real performance problem, but the code is cleaner anyway.
The listings inset and include inset of type listings use two english terms
that are not localized yet: "Listing" for the caption and "Listings" for the
list of listings (not supported natively by LyX yet). The existing layout
translation mechanism has been extended to translate these terms as well:
1) Support [[stuff]] context in lib/layouttranslations
2) Support BabelPreamble and LangPreamble in InsetLayout
3) Use a InsetLayout for InsetInclude of type listings
4) Define BabelPreamble and LangPreamble in the layouts for InsetInclude
and InsetListings
Add a new layout syntax CiteEngine to define the citation commands
available for a given citation engine.
Also extend the CiteFormat syntax to allow more customization. This
mechanism, previously used to produce bibliography entries in the
citation GUI based on the BibTeX entrytype, is now also used to
produce the textual labels for citation insets in the buffer view.
Thus citation styles are almost completely customizable by modules.
Modules for the basic, jurabib and natbib engines are implemented.
Layout format incremented to 37.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40820 a592a061-630c-0410-9148-cb99ea01b6c8
It's amazing we haven't seen problems with this before. The basic problem is that buf.errorList("whatever") would always return the same global, static error list, if it did not already exist. So, to a significant extent, there was only one global error list!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38978 a592a061-630c-0410-9148-cb99ea01b6c8
layout to the current format.
This probably isn't needed for branch, since local layout was a
"hidden feature" prior to 2.0, and one can update local layout by:
(a) copying to a file
(b) running layout2layout on that file
(c) pasting back into LyX
So we should probably just leave this in trunk.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38622 a592a061-630c-0410-9148-cb99ea01b6c8
- Have InsetFlex::layoutName() report "Flex:" + the inset name.
- Do some layout2layout work so that user insets that do not have
the "Flex:" prefix get it.
Note that this will break some CopyStyle stuff, but we do not have any
decent way to do that, so users will have to make that change for
themselves. I guess we should add that to the release notes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38112 a592a061-630c-0410-9148-cb99ea01b6c8
IsPredefined.
The point of this is that the current tag is doing both of these jobs,
and they are different. The achemso class shows this, since it uses
float.sty to define three different kinds of floats internally. We have
to set NeedsFloatPkg to false to prevent LyX from trying to redefine
them, but then we complain that there is no list command defined and so
do not enter it in Insert>List/TOC.
The new tag is not yet functional, just there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37430 a592a061-630c-0410-9148-cb99ea01b6c8
if a float writes to the same auxfile as an existing float. E.g., in the
aguplus classes, we have a plate float that writes to lof and so is just
treated as a figure, for TOC purposes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37427 a592a061-630c-0410-9148-cb99ea01b6c8
noticed that article, for example, still has a counter "chapter". This
surprised me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37193 a592a061-630c-0410-9148-cb99ea01b6c8
the OptionalArgs tag does and is implemented by the now misnamed
InsetOptArgs, except that its content gets wrapped in "{}" rather than
"[]". Required arguments do not actually have to be provided, but they
are always output.
This will allow e.g. beamer's Block environment to be implemented
without ERT.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34591 a592a061-630c-0410-9148-cb99ea01b6c8
elsewhere, but I actually don't know why I put them here in the first
place.
The tex2lyx stuff allows us not to wrap the calls to
frontend::Alert::warning in "#ifdef TEX2LYX" blocks.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34192 a592a061-630c-0410-9148-cb99ea01b6c8
allows for layout- or module-level customization of the display in the
citation dialog and of the XHTML bibliography output.
There is more of this to come, by the way. The next step is to allow
macros. That will make it easier to deal with translation issues, which
ought to be the final step.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33920 a592a061-630c-0410-9148-cb99ea01b6c8
class that is unavailable.
In addition, add some explanations about this kind of thing to the User
Guide, to which we can direct the user in the error message. This kind
of question comes up often enough that we need something right up front
about it. It isn't enough to have it in the other manuals.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33864 a592a061-630c-0410-9148-cb99ea01b6c8
indicates what prefix to use when constructing formatted references.
Documentation to follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33784 a592a061-630c-0410-9148-cb99ea01b6c8
This patch introduces a "ListCommand" tag for Float layout. This tag
defines the command used to generate a list of such floats, in the cases
where float.sty is not used (i.e., where NeedsFloatPkg is true). We were
previously hardcoding the commands \listoftables and \listoffigures. But
in other cases, such as achemso.layout, which defines lists of schemes,
charts, etc, we could not output such lists.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33633 a592a061-630c-0410-9148-cb99ea01b6c8
list revealed that the former is confusing to people. The latter
indicates more clearly what the tag does.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33626 a592a061-630c-0410-9148-cb99ea01b6c8
InsetLayout, per Jurgen's suggestion, so that insets can be told to
display an abbreviated form of their content when closed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32575 a592a061-630c-0410-9148-cb99ea01b6c8
NOTE: Again, I'm not increasing the layout format, though I have added
a couple new things here. If anyone thinks I really do need to do that,
then I will. But I don't think it's necessary, as no-one ought to be using
this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30178 a592a061-630c-0410-9148-cb99ea01b6c8
only sweave is supported (for building documentation, not programs).
Layout files allow a new OutputFormat tag
Modules can be conditionned on a feature of the type from->to, indicating that
it should be possible to convert from format 'from' to format 'to'.
Layout format incremented to 15.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29874 a592a061-630c-0410-9148-cb99ea01b6c8
Don't go into an endless loop if layout2layout cannot produce the desired file format.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28529 a592a061-630c-0410-9148-cb99ea01b6c8
available to tex2lyx. The point is to move the crucial routines that
deal with modules out of BufferParams.cpp, which tex2lyx does not have,
and into TextClass.cpp, which it does.
This is all cleanup that makes a lot of sense independently.
Note that LayoutModuleList will shortly become a real class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28456 a592a061-630c-0410-9148-cb99ea01b6c8
