encodings in the preferences dialog
* src/LaTeXFeatures.C: special treatment for tis620-0 encoding
* src/bufferparams.C: ditto
* src/output_latex.C: ditto
* src/encoding.[Ch]: Add the possibility to iterate over all encodings
* src/paragraph_pimpl.C: Add latin10 and cp858 to Euro treatment
* src/buffer.C: Update format number
* src/frontends/qt4/QDocumentDialog.C: Don't hardcode available
encodings
* lib/lyx2lyx/LyX.py,
lib/lyx2lyx/lyx_1_5.py: implement conversion from 256 to 255
* lib/encodings: Add some encodings, fix all "unknown" entries
* development/FORMAT: Document file format change
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16418 a592a061-630c-0410-9148-cb99ea01b6c8
codepoint > 255.
I decided that this is no file format change: We already had the change to
format 249 that allowed unicode in .lyx files. The output to .tex of
non-ascii characters is now different than before (even for those that were
supported previously, e.g. german umlauts in latin1), but this is only
relevant if people referenced a label in ERT. Since we cannot detect this
anyway we don't need a file format change.
* src/support/lstrings.C
(escape): Extend the escaping algorithm from 8 bit to 24 bit.
* src/support/lstrings.h
(escape): Update comment
* lib/lyx2lyx/lyx_1_4.py
(lyx_support_escape): Update comment
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15883 a592a061-630c-0410-9148-cb99ea01b6c8
Now we can parse all commands that could be parsed in the old
InsetCommandParams
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15551 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer:
file format incrementation to 251
* src/insets/insetcharstyle.[Ch]:
- make show_label a param and save its state
- let all-insets-toggle togle the label in charstyles
* development/FORMAT:
document file format change
* lib/lyx2lyx/LyX.py:
add new file format
* lib/lyx2lyx/lyx_1_5.py:
remove char style label param on reversion to 250.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15345 a592a061-630c-0410-9148-cb99ea01b6c8
(dist_pkgdata_PYTHON): and put it here
(dist_scripts_DATA): rename to dist_scripts_PYTHON; this invokes
automake's built-in python support.
(install-data-hook): adapt to above change.
* lib/lyx2lyx/Makefile.am (dist_lyx2lyx_DATA): rename to dist_lyx2lyx_PYTHON;
this invokes automake's built-in python support.
(install-data-hook): new target: sets executable bit on lyx2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14592 a592a061-630c-0410-9148-cb99ea01b6c8
Support all lyx files (support goes to lyx-0.6 the first public available lyx version).
Fine tune the guessing of the lyx version used to produce the document (only useful for 2.10 and 2.15 documents).
Support to convertion to utf-8 encoding was added but it is not (yet) active.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14558 a592a061-630c-0410-9148-cb99ea01b6c8
as a python dictionary, ready to be used by other python modules.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14557 a592a061-630c-0410-9148-cb99ea01b6c8
The calls are now made to string methods, the advantage being that they work with
unicode strings.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14537 a592a061-630c-0410-9148-cb99ea01b6c8
Add a documentation string to each module.
Add a documentation string to every function in the modules.
file is a python reserved word => s/file/document/g as variable
add a new property to modules, supported_versions that holds
the versions supported by that module
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14534 a592a061-630c-0410-9148-cb99ea01b6c8
lyx_0_10.py
LyX.py: add support for UserGuide convertion from lyx-0.8 (and 0.7).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14532 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_1_1_5.py
* lyx_1_2.py
* lyx_1_3.py
* lyx_1_4.py
* lyx_1_5.py
* parser_tools.py: remove functions that are not generic, i.e.
assume a specific pattern for the file format, and move them to the
places where they are used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14503 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/os.[Ch]
(python): new function, return the python command
* lib/lyx2lyx/lyx_1_5.py
(revert_font_settings): replace tabs with spaces
The rest is simply s/python/python -tt/ and
s/"python"/lyx::support::os::python()/ where appropriate.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14270 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/lyx2lyx/LyX.py (format_relation): add file format 247 (from Georg BAUM).
* lib/lyx2lyx/lyx_1_5.py: add convert_font_settings, revert_font_settings (from Georg BAUM).
* lib/chkconfig.ltx: Test for newly supported font packages
* lib/doc/LaTeXConfig.lyx.in: document newly supported font packages
* lib/doc/UserGuide.lyx: document new UI.
* lib/doc/Extended.lyx: update PostScript font documentation
* development/FORMAT: document file format change 246->247.
* src/tex-strings.[Ch]: new strings tex_fonts_roman, tex_fonts_sans,
tex_fonts_monospaced (with GUI equivalents).
* src/buffer.C: Format up to 247.
* src/bufferparams.C:
new params fontsRoman, fontsSans, fontsTypewriter, fontsDefaultFamily,
fontsSC, fontsOSF, fontsSansScale and fontsTypewriterScale
(LyXFont const BufferParams::getFont): consider switch of default family.
(string const BufferParams::loadFonts): new method to get all the LaTeX
font stuff done.
* src/paragraph.C
(LyXFont const Paragraph::getFont):
(LyXFont const Paragraph::getLabelFont):
(LyXFont const Paragraph::getLayoutFont): user buffer's not textclass's
default font
* src/text.C
(int LyXText::leftMargin):
(int LyXText::rightMargin): user buffer's not textclass's default font
* src/text2.C
(LyXFont LyXText::getFont):
(LyXFont LyXText::getLayoutFont):
(LyXFont LyXText::getLabelFont): check if the family of the default document
font has been customized.
* src/frontends/gtk/GDocument.[Ch]: implement new font ui (from Georg BAUM).
* src/frontends/gtk/glade/document.glade: implement new font ui (from Georg BAUM).
* src/frontends/qt3/Makefile.dialogs: add new FontModuleBase
* src/frontends/qt3/ui/FontModuleBase.ui: new File
* src/frontends/qt3/ui/TextLayoutModuleBase.ui: remove font widgets
* src/frontends/qt3/QDocument.C
* src/frontends/qt3/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/Makefile.dialogs: add new FontUi
* src/frontends/qt4/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/ui/FontUi.ui: new File
* src/frontends/qt4/ui/TextLayoutUi.ui: remove font widgets
* src/frontends/qt4/ui/compile_uic.sh: add new FontUi
* src/frontends/xforms/FormDocument.[Ch]: implement new font ui
* src/frontends/xforms/forms/form_document.fd: add new font tab.
* src/frontends/controllers/ControlDocument.[Ch]
(char ControlDocument::fontfamilies):
(char ControlDocument::fontfamilies_gui):
(bool ControlDocument::isFontAvailable):
(bool ControlDocument::providesSC):
(bool ControlDocument::providesOSF):
(bool ControlDocument::providesScale): new methods, providing font info.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14143 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/lyx2lyx/lyx2lyx_version.py.in
* lib/lyx2lyx/Makefile.am
Add lyx2lyx_version.py to distribution.
* lib/lyx2lyx/LyX.py
Use lyx version as the same version of lyx2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13626 a592a061-630c-0410-9148-cb99ea01b6c8
