* BufferView:
- update(): returns a pair of bools in order to inform for singlePar cases.
- workAreaDispatch(): ditto and simplify the logic by using cursor update flags.
* text.C
- breakParagraph(): change the cursor update flag as needed.
- insertChar(): ditto.
- erase(): ditto
- redoParagraph(): now returns true if there is a height change.
* text3.C: dispatch():
- initialize the cursor flag at the beginning
- LFUN_MOUSE_PRESS: no need to update.
- LFUN_MOUSE_RELEASE: ditto.
- add some FIXMEs and comments.
* LyXFunc::dispatch(): simplify the BufferView update.
* insets/insetcollapsable.C: clarify and simplify the logic in doDispatch().
* WorkArea::dispatch(): redraw only if needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15958 a592a061-630c-0410-9148-cb99ea01b6c8
* src/text.C
(LyXText::dissolveInset): Reset language to buffer language if the
dissolved inset is an ERT inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15888 a592a061-630c-0410-9148-cb99ea01b6c8
- LyXText::breakParagraph(): Redo paragraphs before setCursor()
- LyXText::insertChar(): ditto
* lyxfunc.C: take into account BufferView::update() returned value for WorkArea redrawing.
* BufferView::update(): we also need a second step in singlePar mode.
* WorkArea.C
- startBlinkingCursor(): also show the cursor
- stopBlinkingCursor(): also remove the visible cursor
- processKeySym(): stop and start the cursor blinking instead of merely hide and show it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15884 a592a061-630c-0410-9148-cb99ea01b6c8
deleting empty paragraphs even when keepempty is true. Do not rely
on dEPM, since this was silly (bugs 2587 and 2882)
(Delete): simplify also and avoid calling backspace.
(backspace): small tweak.
(patch by Jean-Marc)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15801 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXText
- bv(), bv_owner, : deleted.
- These methods now need a (Buffer const &) argument: getFont(), applyOuterFont(), getLayoutFont(), getLabelFont(), setCharFont(), setLayout(), singleWidth(), leftMargin(), rightMargin(), computeRowMetrics(), isMainText(), spacing(), isRTL(), cursorX(), rowBreakPoint(), setRowWidth(), labelFill(), labelEnd().
- These methods now need a (BufferView const &) argument and are propably candidates for future removal when 1.6 is opened for development: redoParagraph(), x2pos(), getRowNearY(), getColumnNearX(), checkInsetHit(), setHeightOfRow().
- recUndo(): now need a LCursor argument.
* CoordCache::get(LyXText const *, pit_type):
- now const.
- use const_iterator instead of iterator.
* FontIterator:
- add (Buffer const &) argument to ctor
- buffer_: new const reference to applicable BufferView.
* InsetBase
- xo(), yo(), covers() and neverIndent() are now const.
* InsetText::setViewCache(): deleted
All other changes are due to the LyXText and InsetBase API changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15618 a592a061-630c-0410-9148-cb99ea01b6c8
Better change time handling. Quote from Changes.C:
Class Change has a changetime field that specifies the exact time at which
a specific change was made. The change time is used as a guidance for the
user while editing his document. Presently, it is not considered for LaTeX
export. To avoid that every keystroke results in a separate change, a
tolerance interval of 5 minutes is used. That means if there are two adjacent
changes that only differ in their change time with abs(ct1 - ct2) < 300 sec,
they will be merged (and the later change time is preserved).
Technically, the check for equality (or similarity) is made in
operator==(...). The merging of similar changes happens in method merge().
Resolve FIXMEs for LyX & LaTeX output.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15569 a592a061-630c-0410-9148-cb99ea01b6c8
* src/*.C:
* src/insets/*.C: implement rejectChanges() in analogy to
acceptChanges();
* src/paragraph_pimpl.C: add assertions for pos, start, and
end parameters
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15542 a592a061-630c-0410-9148-cb99ea01b6c8
seems. ChangeTracking responsible please verify all
erase/eraseChar where we added false or where it is
called without changetracking bool (jug).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15456 a592a061-630c-0410-9148-cb99ea01b6c8
* paragraph.h: remove setChar(...); all text changes
must be expressed as erase and insert operations in
order to support change tracking
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15440 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
theCoords is now a thing of the past and all CoordCache accesses are done via BufferView::coordCache() now. I had to modify a number of methods to pass BufferView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15324 a592a061-630c-0410-9148-cb99ea01b6c8
export (e.g. the ToC) and the navigate menu.
* src/insets/insetbase.h
(InsetBase::plaintext): output to a docstream
(InsetBase::textString): ditto
* src/mathed/TextPainter.h
(TextPainter::show): ditto
* src/support/docstream.[Ch] New file and string streams for
docstring. The file streams convert to UTF8 on the fly.
* many more files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15301 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, I replaced all methods in the font_metrics namespace by a proper virtual interface FontMetrics. The FontLoader is _the_ container for FontMetrics.
This patch should also bring some optimizations in a number of place in the code. This is because we do not need any more to search for the LyXFont at each font_metrics call. In effect, the speed advantage is not as sensible and this is a bit deceiving considering that this was my primary motivation behind the patch. But I like the patch anyway as it cleans up the relation and interfacing between fonts, metrics and frontends.
* frontends/FontMetrics.h: new virtual interface. Renamed from font_metrics.h
* qt4/GuiFontMetrics: corresponding qt4 implememtation. Renamed from qfont_metrics.C. The smallCaps particular case treatment has been transfered here as well as the width cache for MacOSX and Windows.
* qt4/QLPainter.C: the smallCapsText has been reworked to return the width of the drawn text.C
all other files: replace font_metric helper function call with corresponding FontMetrics method calls.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15265 a592a061-630c-0410-9148-cb99ea01b6c8
* rename output_changes to outputChanges
* rename tracking_changes to trackChanges
* add FIXMEs for later revision
* remove trackChanges(); the CT data structure will always be set up
* decouple LFUNs changes-output/change-accept/change-reject/
all-changes-accept/all-changes-reject from LFUN changes-track
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15261 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C (getStatus):
* src/insets/insettext.C (doDispatch,getStatus): remove special code
for LFUN_INSET_DISSOLVE.
* src/text.C (dissolveInset): new method.
(erase, backspace): use dissolveInset.
* src/text3.C (dispatch): use dissolveInset for LFUN_INSET_DISSOLVE.
(getStatus): disable LFUN_INSET_DISSOLVE if the inset has more than one cell.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14940 a592a061-630c-0410-9148-cb99ea01b6c8
- src/support/unicode.[Ch]: new files with functions for converting
to and fro ucs4, ucs2 and utf8.
- src/support/docstring.h: specialization of basic_string that
holds a uint32_t internally.
- Several functions changed to use char_type instead of char or unsigned char.
- Qt3 and Qt4 sends ucs2 on to core
- Gtk sends ucs4 on to core
- Read and write utf-8 .lyx files.
- font_metrics and painter updated to handle ucs4 chars as input.
- Quite a bit of ugly compability code, conversion string->docstring, etc.
- Have fun...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14661 a592a061-630c-0410-9148-cb99ea01b6c8
I had no choice but to use string for the map key. This is
because the only information that could be passed to the controller is a
string.
With this new architecture, persistent error lists are now possible.
* Buffer
- errorList_, addError(), : deleted
- std::map<std::string, ErrorList> errorLists_ : new member
- errorList(std::string const & type): associated accessors
* buffer_funcs.C
- bufferErrors(Buffer const & buf, TeXErrors const & terr): now needs a third errorList argument
- bufferErrors(Buffer const & buf, ErrorList const & el): deleted.
* Converter
- convert(): now needs an ErrorList argument instead of filling the Buffer errorList member directly.
- runLaTeX(): ditto
- scanLog(): ditto
* CutAndPaste.C
- pasteParagraphList(): ditto
- pasteSelection(): ditto
* lyxtext.h/text.C
- readParagraph(): ditto
- LyXText::read(): ditto
* importer:
- Importer::Import(): ditto
* BufferView_pimpl.C
- loadLyXFile(): send the Buffer::errors() signal instead of calling LyXView::showErrorList() directly.
* exporter.C
- Export(): send the Buffer::errors() signal instead of calling LyXView::showErrorList() directly in lyxfunc.C
* ControlErrorList.C
- initialiseParams(): translation operation transfered here from LyXView::showErrorList().
* LyXView.C
- LoadLyXFile(): add a showErrorList("Parse") call.
- showErrorList(): simplified due to code transferred to the ControlErrorList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14652 a592a061-630c-0410-9148-cb99ea01b6c8
TODO 1: All occurrences of "LyXView::showErrorList()" in the "kernel" should be replaced by a boost signal emission (Buffer::errors()). This signal is already connected to this showErrorList() slot.
TODO 2: The ErrorList mechanism is used wrongly in a number of place, most notably in "Converter.C". Instead of replacing the ErrorList in the "Buffer" class, the "Converter" class should maintain its own list instead and connect directly to the LyXView::showErrorList() slot.
Buffer:
* errorList_: new private member and associated access methods.
* setErrorList(): new accessor method.
* addError(): apend an error to the errorList_.
* error(): deleted.
* errors(): new boost signal, unused for now. Shall be used instead of LyXView::showErrorList().
LyXView:
* getErrorList(), addError(), errorlist_, errorConnection_: deleted.
* errorsConnection_: new boost connection for the Buffer::errors() signal.
lyx_main.C:
* LyX::exec2(): manually print all errors.
BufferView.h: remove unneeded ErrorList forward declaration.
BufferView::pimpl::menuInsertLyXFile(): delete Buffer::error() connection and add a FIXME comment
text.C: Use Buffer::addError() instead of Buffer::error() signal emission.
ControlErrorList.C: get the ErrorList from the Buffer instead of LyXView
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14467 a592a061-630c-0410-9148-cb99ea01b6c8
- Change unsigned -> signed
- Change signed -> unsigned
- Add a cast or two (really few of those)
- Remove/comment out unused variables
- Comment out unused arguments
- Add missing cases to switches.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14344 a592a061-630c-0410-9148-cb99ea01b6c8
