defined there, also while using the dialog from the Adv F&R WAs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38866 a592a061-630c-0410-9148-cb99ea01b6c8
Added accompanying regression tests for displayed math and numbered equations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38860 a592a061-630c-0410-9148-cb99ea01b6c8
viewer to give us sensible information, but that information may be out-
generated. So we need to check and make sure the values we get are
valid.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38859 a592a061-630c-0410-9148-cb99ea01b6c8
This allows to pick and search for citations present in the main document.
This was started to be discussed in a relatively unrelated bug #7581, then the patch
was proposed here: http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg169277.html
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38847 a592a061-630c-0410-9148-cb99ea01b6c8
For example, before this footnotes were not correctly found.
Added also accompanying regression test.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38846 a592a061-630c-0410-9148-cb99ea01b6c8
the same document could not be rendered.
Problem was that we were using children_positions to deal with the
included documents. That structure only includes each child once.
We need to use position_to_children, instead.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38842 a592a061-630c-0410-9148-cb99ea01b6c8
the macros declared in the parent do not work. This is because we were
cloning only the child, which then didn't have a parent.
The solution is to clone the whole structure, starting with the master
document. As a side effect, we only clone each child once.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38837 a592a061-630c-0410-9148-cb99ea01b6c8
Thus, we can't rely on the returned timestamp being -1 if a pdf doesn't exist.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38835 a592a061-630c-0410-9148-cb99ea01b6c8
from the main document WA to the find/replace WAs (in addition
to the language, as required for addressing #6560).
I'm not cloning the whole BufferParams because we learned
from
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg168175.html
that, for example, if we inherit the default master by mistake,
then we may run into problems.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38819 a592a061-630c-0410-9148-cb99ea01b6c8
2.) Read the PATCH_VERSION from configure.ac too
3.) Ident-text in script
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38804 a592a061-630c-0410-9148-cb99ea01b6c8
BufferView::dispatch(), and the screen update is done properly there.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38779 a592a061-630c-0410-9148-cb99ea01b6c8
in LyXRC::write(), i.e., by listing RC_LAST as the first item in the switch.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38738 a592a061-630c-0410-9148-cb99ea01b6c8
Always wondered why I had to restart LyX after changing the PATH prefix.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38736 a592a061-630c-0410-9148-cb99ea01b6c8
by Jan Paul Imhoff. The problem was that we were assuming (as we still
do in some places) that there are always at least two cells.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38717 a592a061-630c-0410-9148-cb99ea01b6c8
multicell inset, where we now export all of the cells
separated by "\t", instead of only the first cell.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38712 a592a061-630c-0410-9148-cb99ea01b6c8
Otherwise, we were asking to construct strings of random size at a
certain point, e.g., two 2GB strings, in one case I saw.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38704 a592a061-630c-0410-9148-cb99ea01b6c8
This was an attempt to fix#2743 without re-working the InsetBibitem
mess. It didn't work, so we have to do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38702 a592a061-630c-0410-9148-cb99ea01b6c8
variable. This is done in the preferences, much like as the PATH prefix.
A single '.' in the paths will get replaced with the current document dir
and also non-absolute paths will be prefixed with that dir.
The default semantics of TEXINPUTS apply, such that, for example, if a
path is terminated with a double slash, all subdirectories will be also
searched by both the TeX engine and ancillary programs such as dvi
previewers or dvips. As an example, if the prefix is set to ".:figs", the
TEXINPUTS variable will be set as ".:<docdir>:<docdir>/figs:$ORIGTEXINPUTS",
where <docdir> is the document directory.
The initial '.' is necessary to address the actual current dir (this will
be the temp dir at preview time), while if TEXINPUTS was initially unset,
such that $ORIGTEXINPUTS is empty, a colon (or semicolon on Windows) will
end the path list. This is very important, because we don't want to replace
the system directories but to complement them and, in order to do that, an
empty element has to be present in the list. Indeed, according to the
TEXINPUTS semantics, an empty element means the standard search path.
This works whether TEXINPUTS is originally set or not, because if the
original TEXINPUTS starts with a colon (meaning that the standard search
path is wanted there) we will have an empty element at that point,
otherwise the final colon will simply serve as a path separator.
Of course, on Windows a ';' has to be used as a path separator. LyX will
take care of transforming the platform path list into one understandable
by the TeX engine. For example, this will be the case for a Cygwin version
of LyX using a native Windows TeX engine or viceversa. I tested all of
this and it works for me.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38681 a592a061-630c-0410-9148-cb99ea01b6c8
We clear the refernce cache so that we won't get conflicts with labels
that get pasted into the buffer. We should update this before its being
empty matters. If not (i.e., if we encounter bugs), then this should
instead be:
cur.buffer().updateBuffer();
But we'll try the cheaper solution in trunk.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38680 a592a061-630c-0410-9148-cb99ea01b6c8
It must have been wrong before the updateBuffer() refactoring, too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38676 a592a061-630c-0410-9148-cb99ea01b6c8
We are missing the updateBuffer() call when we go through
mouseEventDispatch(). A consequence of the massive updateBuffer()
refactoring. Wish it had been caught before...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38667 a592a061-630c-0410-9148-cb99ea01b6c8
a number of unforeseen issues (like the inheritance of the default master, as
pointed out in http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg168225.html),
now we simply set the language into the search & replace buffers.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38647 a592a061-630c-0410-9148-cb99ea01b6c8
layout to the current format.
This probably isn't needed for branch, since local layout was a
"hidden feature" prior to 2.0, and one can update local layout by:
(a) copying to a file
(b) running layout2layout on that file
(c) pasting back into LyX
So we should probably just leave this in trunk.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38622 a592a061-630c-0410-9148-cb99ea01b6c8
inset to know that the BibTeX data had changed. So we introduce a
Buffer-wide variable that we can query for that information.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38619 a592a061-630c-0410-9148-cb99ea01b6c8
calls into the file writing routines and out of doExport(). They were in
both places before: Called once in doExport, and then again in the e.g.
writeLaTeXSource()---and then again, actually, in validate().
It is possible this will reveal some missing updateBuffer() calls
somewhere. But it should somewhat speed up View>Source, since we now do
not do an extra set of such calls in that routine. Rather, we rely upon
the Buffer's having been made up to date first, by the updateBuffer()
call after dispatch.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38596 a592a061-630c-0410-9148-cb99ea01b6c8
Now it is no longer needed to use a tree that was never used for building
for remerging .po files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38585 a592a061-630c-0410-9148-cb99ea01b6c8
assure to switch to math mode if needed. This helps avoiding latex
errors (see http://thread.gmane.org/gmane.editors.lyx.general/69580)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38579 a592a061-630c-0410-9148-cb99ea01b6c8
Something went wrong with a script while previewing a document and now
I have to wait for 30 minutes for quitting LyX without killing it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38578 a592a061-630c-0410-9148-cb99ea01b6c8
As the bug report notes, you do NOT get this crash if you move up or
down in the table a bit before you do the rest. The reason is that
moving up and down sets the cursor's x_target_, and it is because that
is not set that we enter the other code at all and eventually crash.
That is, in InsetTabular's dispatch, we have:
(*) cur.pos() = tm.x2pos(cur.pit(), pm.rows().size()-1, cur.targetX());
You can see the potential for trouble here already. cur.pit() is in the
NEW cell, i.e., the one to which we are moving; it was changed a few
lines previously, and cur.idx() points to the new cell, too. But we are
trying to calculate cur.pos(), which means that cur.pos() is currently
the one from the OLD cell. So the cursor is in an inconsistent state.
Calling cur.targetX() leads us to call Cursor::getPos(), and that is
what causes the crash.
We fix the problem by making sure we call targetX() on the original
cursor. The same problem clearly exists in the DOWN stuff, so we fix
that, too.
By the way, should we be setting x_target_ here once we have calculated
it?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38530 a592a061-630c-0410-9148-cb99ea01b6c8
http://www.mail-archive.com/lyx-
for the reason it needs to be here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38497 a592a061-630c-0410-9148-cb99ea01b6c8
If a class has already loaded hyperref (i.e., if \hypersetup is already defined),
immediately issue \hypersetup to prevent a LaTeX error (bug #7459).
This still assures that \hypersetup is called \AtBeginDocument if hyperref is loaded by
a class \AtBeginDocument (such as modernCV, see #7048).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38438 a592a061-630c-0410-9148-cb99ea01b6c8
use it to translate the message. (Note that this is presently used only
for XHTML output.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38405 a592a061-630c-0410-9148-cb99ea01b6c8
The one remaining question is whether we should also call resetAnchor()
at the end of setCursor().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38388 a592a061-630c-0410-9148-cb99ea01b6c8
documents and graphics were not copied to the export directory, since
the format passed to addExternalFile() was wrong.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38378 a592a061-630c-0410-9148-cb99ea01b6c8
Read the comment of odocstream in src/support/docstream.h if you want to
know why this fix is correct.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38335 a592a061-630c-0410-9148-cb99ea01b6c8
- set again bind_textdomain_codeset before calling gettext.
This works around the infamous bug #7371
Patch from Peter Kümmel.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38325 a592a061-630c-0410-9148-cb99ea01b6c8
(Sorry for not waiting for you, I wanted to enter freeze ASAP.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38317 a592a061-630c-0410-9148-cb99ea01b6c8
- unify font handling between TeX and non-TeX fonts
- show unavailable fonts as 'The Font (not installed)' in the Fonts dialog
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38316 a592a061-630c-0410-9148-cb99ea01b6c8
* updateView() should start a spell check only on first call after init
* at the end of document the dialog should hide itself when user said "no" to continue spell check
* when the last word of a note inset is misspelled forward() wrongly think it's the end of doc
* when the user clicks the buttons fast, recursive calls are possible
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38307 a592a061-630c-0410-9148-cb99ea01b6c8
when latex fails with a preview. Fixes bug #7303 (IP fails with hyperref).
Patch by Ale with suggestions from Enrico
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38243 a592a061-630c-0410-9148-cb99ea01b6c8
involves no change of functionality, due to the fall-back mechanism and
is needed for XHTML CSS output for the boxes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38225 a592a061-630c-0410-9148-cb99ea01b6c8
throwing errors in the case where we are inside a charstyle that itself
uses a font tag, e.g., strong from the logical markup module. This at
least gets rid of most of the errors, and doesn't seem to cause any
other problems.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38220 a592a061-630c-0410-9148-cb99ea01b6c8
as an image.
The math macro now exports as XHTML + MathML and can be viewed in
Firefox.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38190 a592a061-630c-0410-9148-cb99ea01b6c8
to be a set. Not that speed will really be an issue here, but....
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38178 a592a061-630c-0410-9148-cb99ea01b6c8
since plain old latex will likely choke on the generated .tex file
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38168 a592a061-630c-0410-9148-cb99ea01b6c8
New icon sets declare the normal size through an iconsize.png file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38135 a592a061-630c-0410-9148-cb99ea01b6c8
Also, if we're "undefined", then we should just continue reading.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38116 a592a061-630c-0410-9148-cb99ea01b6c8
of a flex InsetLayout, let's check for it when we hit a LyXType tag, and
refuse to honor it unless we have the right sort of name.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38115 a592a061-630c-0410-9148-cb99ea01b6c8
- Have InsetFlex::layoutName() report "Flex:" + the inset name.
- Do some layout2layout work so that user insets that do not have
the "Flex:" prefix get it.
Note that this will break some CopyStyle stuff, but we do not have any
decent way to do that, so users will have to make that change for
themselves. I guess we should add that to the release notes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38112 a592a061-630c-0410-9148-cb99ea01b6c8
preparatory to fixing #7080. Note that mathed uses the same routine, but
for a completely different purpose, so I did not rename it there. I have
seen no difference in behavior after testing, e.g., opening and
exporting Math.lyx, and also re-saving it and looking at the diff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38109 a592a061-630c-0410-9148-cb99ea01b6c8
the size of icons may be wrong when switching between sets with different
normal icon size. One needs to save the preferences, restart LyX and choose
"Normal-sized icons" from the toolbar menu to have the real normal size.
A minor glitch is that the name of the icon sets is translatable, but
currently only the translation for "Default" works. The problem is that I
don't know how to ask gettext for an inverse translation when saving the
preferences. Another possibility would be hardcoding the order of the names
in the combo box (such that to not rely on their names), but that is ugly
and prone to errors if/when other sets are added.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38041 a592a061-630c-0410-9148-cb99ea01b6c8
through the rc setting \icon_set. Preferences dialog will follow shortly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38038 a592a061-630c-0410-9148-cb99ea01b6c8
- don't assume that the exported file extension is .tex
- use converter tool chain to produce a latex file for input or include
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38025 a592a061-630c-0410-9148-cb99ea01b6c8
* Transform Spellchecker.ui into a simple QWidget
* Pimpl all we can
* Remove progress bar
* Remove Close button (as for all other dock widgets)
* Allow the dialog to stay even for empty document
* Disable the dialog when closing all documents
* always work against the current document Bufferview (as opposed to embedded bufferview).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38018 a592a061-630c-0410-9148-cb99ea01b6c8
exported documents.
To update the translations from the .po files, run
make ../lib/layouttranslations
from po.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38016 a592a061-630c-0410-9148-cb99ea01b6c8
addition to r37974: if English is used as a secondary language, we have to propose an English translation,
since the original string is in the document's main language!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37975 a592a061-630c-0410-9148-cb99ea01b6c8
- do not propose translations for bultin floats (they are translated anyway)
- only propose translations for floats if we have something different to the English source
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37974 a592a061-630c-0410-9148-cb99ea01b6c8
There are two possibilities to add an Inset to the CoordCache:
- 1), use CoordCache::add(Inset * p, int x, int y),
- 2), use CoordCache::add(Inset * p, Dimension dim).
In the latter case, the x and y are happily initialized as 0.
Also, when one call CoordCache::has(Inset * p), it will happily
return true because the cache knows something about this inset.
In #7261, LyX asked for the (x,y) position of an Inset and
received (0,0) as an answer, although that is not the position
of the Inset.
By adding some defaults for x,y in case of initializing with
dim only will give an extra check whether the cache really
"has" the position object.
In the long run, we might want to split the cache for
dimensions and positions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37968 a592a061-630c-0410-9148-cb99ea01b6c8
Two things have been fixed here:
1) the selection should not be cleared when the user right clicks a math inset that is part of the selection,
2) the type of context menu should be determined at mouse-press, because that is the moment when the cursor is set. However, we should do it after setting the cursor, because setting the cursor might change the selection status and this influences the choice for the type of context menu.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37961 a592a061-630c-0410-9148-cb99ea01b6c8
Reset to the default greyed out text color, not to the note background color
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37956 a592a061-630c-0410-9148-cb99ea01b6c8
make NOBREAKDASH isLetter()
* Paragraph.cpp (isWord separator):
handle composites with hyphens as one word (i.e., "-" is not a word separator).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37946 a592a061-630c-0410-9148-cb99ea01b6c8
Indeed, unchecking ignore format in that scenario was not matching anyway while searching.
This patch fixes that behavior.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37943 a592a061-630c-0410-9148-cb99ea01b6c8
under refstyle, since (a) the default refstyle.cfg defines \eqref itself
and (b) does NOT define it the way AMS does. So we simply output:
(\ref{label})
in this case, to match what we say in the UI.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37918 a592a061-630c-0410-9148-cb99ea01b6c8
Currently, if an inset outputs a newline, the new latex row is still
associated with a previous id/pos. Now, if a latex error occurs before
this newline, we would still highlight everything associated to that
id/pos, even if it is extraneous to the error.
This is avoided by associating the new latex row with the id/pos in
effect right before entering the inset. If an inset does not output
a newline, it is not excluded from the selection, consistent with the
fact that the text of the inset does appear in the error description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37903 a592a061-630c-0410-9148-cb99ea01b6c8
as a whole gets highlighted. Now, the error list carries information
about the starting id/pos and ending pos, but not about the ending id.
So, when computing the range to be highlighted as range = pos_end - pos_start,
if id_start != id_end, the result 1 means one inset and only the first
character in the inset would be highlighted. Thus, when id_start != id_end,
let pos_end = 0, such that the whole content will be highlighted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37900 a592a061-630c-0410-9148-cb99ea01b6c8
of the first call of TexRow::start(), rather than the last before a newline.
This is what was causing some recent grief (bug #7325, for example).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37894 a592a061-630c-0410-9148-cb99ea01b6c8
This fixes the display of sweave Chunks in sweave.lyx example, which uses parskip instead of indent.
The rest of the changes are just white space
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37881 a592a061-630c-0410-9148-cb99ea01b6c8
of a lyx document. What par.id() is associated to the line depends on the
last call of TexRow::start() before a newline is actually issued.
If the par.id() of an ert is the one associated to the exported line,
when an error occurs, that ert is always returned by Buffer::getParFromID()
(and thus would be highlighted) whether the error actually occurred there
or elsewhere in the same paragraph.
So, better highlighting the whole paragraph when the error seems to have
occurred in ert.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37870 a592a061-630c-0410-9148-cb99ea01b6c8
child, the returned list had no master and twice the child itself).
(was causing misbehavior in Advanced Find & Replace with scope=Document).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37852 a592a061-630c-0410-9148-cb99ea01b6c8
at the same line. Given that we know where the error occurred, don't
unnecessarily check the master first.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37846 a592a061-630c-0410-9148-cb99ea01b6c8
