* src/insets/insetgraphics.C
(findTargetFormat): return pdf for vector graphics
* src/format.h
(Flags): new enum describing format flags
(flags_): new member variable for format flags
(vectorFormat): new, tell whether a format can contain vector graphics
* src/format.C: adjust to flags changes
* src/frontends/qt[34]/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new vector flag
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt3/ui/QPrefFileformatsModule.ui
* src/frontends/qt4/ui/QPrefFileformatsUi.ui
(vectorCB): new checkbox for vector flag
* src/lyxrc.C
(LyXRC::read): read vector flag
(LyXRC::write): write vector flag
* lib/doc/Customization.lyx: document format flags
* lib/configure.py
(checkFormatEntries): Add vector flag to some formats
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15205 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiView.C
(setGeometry): replace test for Q_OS_WIN32 with Q_WS_WIN
* src/support/fontutils.C:
If X_DISPLAY_MISSING is defined, compile the code for Win32
on cygwin, too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15201 a592a061-630c-0410-9148-cb99ea01b6c8
A trivial (looking) patch to correct inset behavior, which is broken
with revision 15068. Without this patch, it is not possible to modify
an existing inset. All modifications processed as new index. (see
lyxfunc.C:1420)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15199 a592a061-630c-0410-9148-cb99ea01b6c8
These font related functions were identical for qt3 and qt4. They are not Qt dependent at all and could also apply to an eventual Win32 or MacOSX gtk port.
Jen-Marc says: It would be nice to convince fontconfig to do the same for linux.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15196 a592a061-630c-0410-9148-cb99ea01b6c8
* gtk/qt3/qt4/GuiApplication: createView() method deleted
* LyXView:
- init(): is now a pure virtual method. autoSave code transferred to constructor and updates to the frontends.
- setGeometry(): new pure virtual method
* gtk/GView, qt3/QtView, qt4/GuiView: adapted to above change
- setGeometry(): code transfered from GuiApplication
* lyx_main.C: call LyX::ref().addLyXView() in there instead of in Application::createView()
*
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15183 a592a061-630c-0410-9148-cb99ea01b6c8
addWithStatus(). It also replaces LyXView uses with BufferView as none of the LyXView feature were used.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15181 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
(only on windows).
* src/frontends/Dialogs.C
(Dialogs::hide): Don't send the signal if we are quitting
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15116 a592a061-630c-0410-9148-cb99ea01b6c8
Most of qt3 and gtk should stay compilable except for LyXView.h because the LyXFunc instance has been transferred to Application.
* frontends/Application: new class aimed to be the one unique interface between the frontend and the kernel. Contains one global pointer to the unique instanciation theApp.
* frontends/qt4/GuiApplication: renamed from qt4/Application, the qt4 specialisation of the Application class. Contains one global pointer to the unique instanciation guiApp (equal to theApp but pointing to a GuiApplication instead).
* frontends/qt4/lyx_gui.C: most of the code has been moved to Application and GuiApplication
All other file: adapted to new API.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15114 a592a061-630c-0410-9148-cb99ea01b6c8
The associated WorkArea is then responsible to connect these signals to its LyXView parent.
* BufferView:
- showDialog, showDialogWithData, showInsetDialog: new boost signals
* LyXView:
- connectBufferView(), disconnectBufferView(): new method in charge of the connection/disconnection of the above signal to associate private methods (showDialog(), etc).
* WorkArea
- setBufferView(): will connect/disconnect the BufferView to its LyXView parent.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15068 a592a061-630c-0410-9148-cb99ea01b6c8
No scons and cmake support! scons and cmake need to find out the size of
wchar_t and define this macro in config.h (example for 32bit wchar_t):
* The size of a `wchar_t', as computed by sizeof. */
#define SIZEOF_WCHAR_T 4
* configure.ac: Test size of wchar_t
* src/support/types.h: don't include docstring.h anymore.
Use wchar_t as lyx::char_type if it is 32 bit wide.
* src/support/docstring.h: Use lyx::char_type for defining docstring
* src/metricsinfo.h: include support/docstring.h instead of
support/types.h
* src/lyxlex.h: ditto
* src/frontends/font_metrics.h: ditto
* src/frontends/qt4/qt_helpers.h: ditto
* src/frontends/Painter.h: ditto
* src/errorlist.h: ditto
* src/support/lstrings.h: ditto
* src/lyxfunc.h: ditto
* src/LaTeX.h: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14991 a592a061-630c-0410-9148-cb99ea01b6c8
(QLPopupMenu::populate): Don't append a lyx::char_type to a qstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14988 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlMath.C
(latex_misc): Add intop and ointop
* lib/images/math/intop.xpm: New
* lib/images/math/ointop.xpm: Ditto
* lib/images/math/int.xpm: Add box to make the difference to intop clear
* lib/images/math/oint.xpm: ditto
* lib/Makefile.am: add new files
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14924 a592a061-630c-0410-9148-cb99ea01b6c8
* Dialogs::disconnect(string const & name): check if the dialog is an inset before resetting open_insets_
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14889 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/qt_helpers.[Ch]
(toqstr): add variant for docstring
(qstring_to_ucs4): Use docstring and port from qt4 to qt3
* Many other files: Many std::string -> lyx::docstring conversions
* src/support/lstrings.[Ch]
(subst): Add variant for docstring and char_type
(externalLineEnding): std::string -> lyx::docstring
(internalLineEnding): std::string -> lyx::docstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14871 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.[Ch]
(from_ascii): new conversion function
(from_utf8): new conversion function
(to_utf8): new conversion function
(operator==) new, compare docstring and ASCII C string
(operator!=) new, compare docstring and ASCII C string
* src/support/Makefile.am: add new file docstring.C
* development/scons/scons_manifest.py: ditto
* src/funcrequest.[Ch]
(argument): change name to argument_ and type to docstring,
add an accessor
(FuncRequest): Add two new constructors taking a docstring argument
* all other files: adjust to the FuncRequest changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14861 a592a061-630c-0410-9148-cb99ea01b6c8
* qfont_metrics.C: make use of above methods instead of those in unicode.[Ch]
* QLPainter.C: ditto
* QLyXKeySym.C: ditto + simplification and a BOOST_ASSERT that verifies that the event is one char only.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14852 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/GuiWorkArea.C
(GuiWorkArea::dropEvent): Use toLocalFile instead of toString,
because toString omits the first backslash of UNC paths.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14846 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXView: save two setLayout() calls that are done in updateLayoutChoice() anyway.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14833 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* lyxfunc.C:
- LyXFunc::dispatch(): put some save guards before using
BufferView::cursor() and sendDispatchMessage().
* BufferView_pimpl.C
- BufferView::Pimpl::setBuffer(): return before if exiting.
* WorkArea.C:
- WorkArea::redraw(): update the toolbar when greying out.
* LyXView.C:
- LyXView::setBuffer(): sanitization
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14815 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/Action.C (Action): do not set entry to
checkable by default; invoke update() to set it up.
(update): only set checkable property if needed.
* src/frontends/qt4/QLPopupMenu.C (populate): in the case of
a Command menu item, let Action set itself up.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14811 a592a061-630c-0410-9148-cb99ea01b6c8
* config/lyxinclude.m4: reset release date for development versions.
* src/version.C.in: make lyx_release_date a placeholder.
* src/lyx_main.C (parse_version):
* src/frontends/controllers/ControlAboutlyx.C (getVersion): change a
bit the display of LyX release date.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14712 a592a061-630c-0410-9148-cb99ea01b6c8
* src/CutAndPaste.C (setSelectionRange, replaceWord): remove.
(replaceSelectionWithString): select the new string after
replacement; add a bool parameter indicating in which sense the
selection is made.
* src/lyxfind.C (replace): adapt to above changes.
(find): comment out debug message.
* src/frontends/controllers/ControlSpellchecker.C (isLetter):
rename parameter.
(nextWord): take a LCursor as parameter; set the selection over
the word that has been found.
(check): adapt to changes above (the length of the word is not
necessarily the length of the selection -- fixes bug 2068).
(replace): use cap::replaceSelectionWithString
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14708 a592a061-630c-0410-9148-cb99ea01b6c8
Log:
* BufferView/pimpl:
- scrollDocView(): call to BufferView::update() deleted.
- scrollDocView(): second part is now in setCursorFromScrollbar()
- setCursorFromScrollbar(): new method.
* WorkArea:
- setBufferView(): show the cursor immediately
- redraw(): call to updateScrollbar()
- updateScrollbar(): new method
- scrollBufferView(): fix it and show the cursor immediately.
* qt4/GuiWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
- paintEvent(): scrollbar related code deleted
* qt3/QWorkArea
- setScrollbarParams(): now disable the Qt scrollbar tracking.
* qt3/QContentPane
- paintEvent(): scrollbar related code deleted
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14704 a592a061-630c-0410-9148-cb99ea01b6c8
- simplify setting/unsetting of item
- consolidate 2 methods that set bulletSelected
- store character (int) instead of pointer to item
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14672 a592a061-630c-0410-9148-cb99ea01b6c8
- src/support/unicode.[Ch]: new files with functions for converting
to and fro ucs4, ucs2 and utf8.
- src/support/docstring.h: specialization of basic_string that
holds a uint32_t internally.
- Several functions changed to use char_type instead of char or unsigned char.
- Qt3 and Qt4 sends ucs2 on to core
- Gtk sends ucs4 on to core
- Read and write utf-8 .lyx files.
- font_metrics and painter updated to handle ucs4 chars as input.
- Quite a bit of ugly compability code, conversion string->docstring, etc.
- Have fun...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14661 a592a061-630c-0410-9148-cb99ea01b6c8
I had no choice but to use string for the map key. This is
because the only information that could be passed to the controller is a
string.
With this new architecture, persistent error lists are now possible.
* Buffer
- errorList_, addError(), : deleted
- std::map<std::string, ErrorList> errorLists_ : new member
- errorList(std::string const & type): associated accessors
* buffer_funcs.C
- bufferErrors(Buffer const & buf, TeXErrors const & terr): now needs a third errorList argument
- bufferErrors(Buffer const & buf, ErrorList const & el): deleted.
* Converter
- convert(): now needs an ErrorList argument instead of filling the Buffer errorList member directly.
- runLaTeX(): ditto
- scanLog(): ditto
* CutAndPaste.C
- pasteParagraphList(): ditto
- pasteSelection(): ditto
* lyxtext.h/text.C
- readParagraph(): ditto
- LyXText::read(): ditto
* importer:
- Importer::Import(): ditto
* BufferView_pimpl.C
- loadLyXFile(): send the Buffer::errors() signal instead of calling LyXView::showErrorList() directly.
* exporter.C
- Export(): send the Buffer::errors() signal instead of calling LyXView::showErrorList() directly in lyxfunc.C
* ControlErrorList.C
- initialiseParams(): translation operation transfered here from LyXView::showErrorList().
* LyXView.C
- LoadLyXFile(): add a showErrorList("Parse") call.
- showErrorList(): simplified due to code transferred to the ControlErrorList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14652 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/gtk/GWorkArea.C
(GWorkArea::onScroll): redraw the workarea
(GWorkArea::onButtonPress): Call WorkArea::dispatch instead of
BufferView::workAreaDispatch in order to redraw the workarea
(GWorkArea::onButtonRelease): ditto
(GWorkArea::onMotionNotify): ditto
* src/frontends/WorkArea.h
(dispatch): make public
* src/frontends/qt3/QContentPane.C
(QContentPane::scrollBarChanged): redraw the workarea
(QContentPane::generateSyntheticMous): Call WorkArea::dispatch instead
of BufferView::workAreaDispatch in order to redraw the workarea
(QContentPane::mousePressEvent): ditto
(QContentPane::mouseReleaseEvent): ditto
(QContentPane::mouseMoveEvent): ditto
(QContentPane::doubleClickTimeout): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14517 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/tex_helpers.h: doxyfy comment
* src/frontends/controllers/tex_helpers.C
(rescanTexStyles): Pop up a message box when TeXFiles.py fails
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14488 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyxfunc.C
(quoteArg): new, quotes arguments for the "log" dialog
(LyXFunc::dispatch): quote log filename
* src/frontends/controllers/ControlLog.C
(ControlLog::initialiseParams): parse \" as " and \\ as \ in filename
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14481 a592a061-630c-0410-9148-cb99ea01b6c8
TODO 1: All occurrences of "LyXView::showErrorList()" in the "kernel" should be replaced by a boost signal emission (Buffer::errors()). This signal is already connected to this showErrorList() slot.
TODO 2: The ErrorList mechanism is used wrongly in a number of place, most notably in "Converter.C". Instead of replacing the ErrorList in the "Buffer" class, the "Converter" class should maintain its own list instead and connect directly to the LyXView::showErrorList() slot.
Buffer:
* errorList_: new private member and associated access methods.
* setErrorList(): new accessor method.
* addError(): apend an error to the errorList_.
* error(): deleted.
* errors(): new boost signal, unused for now. Shall be used instead of LyXView::showErrorList().
LyXView:
* getErrorList(), addError(), errorlist_, errorConnection_: deleted.
* errorsConnection_: new boost connection for the Buffer::errors() signal.
lyx_main.C:
* LyX::exec2(): manually print all errors.
BufferView.h: remove unneeded ErrorList forward declaration.
BufferView::pimpl::menuInsertLyXFile(): delete Buffer::error() connection and add a FIXME comment
text.C: Use Buffer::addError() instead of Buffer::error() signal emission.
ControlErrorList.C: get the ErrorList from the Buffer instead of LyXView
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14467 a592a061-630c-0410-9148-cb99ea01b6c8
With this change, the only difference between BufferView.h and BufferView_pimpl.h is "cursor.h" so I think it is time to merge the two classes at last.
BufferView:
* showErrorList(), getErrorList(): transfered to LyXView.
BufferView::pimpl
* addError(), showReadonly(), connectBuffer(), disconnectBuffer(): transfered to LyXView.
CutAndPaste.C: adapted to API changes
frontends/controllers/ControlErrorList.C: ditto
lyxfunc.C: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14458 a592a061-630c-0410-9148-cb99ea01b6c8
The performance may suffer a bit because we do the second drawing step in all cases. This could be possibly optimized out by checking the return value of the BufferView::update() method in "lyxfunc.C:1610". But it is maybe better to keep those two parts of the frontend ignorant of each other: the event handling and the drawing.
BufferView:
* needRedra(), need_redraw_: deleted.
* updateMetrics(): now public.
* update(): only do the first drawing step. Returns true if a full updateMetrics is needed before drawing on screen.
WorkArea:
* redraw(): no check on BufferView::needRedraw(), call updateMetrics() unconditionally.
* processKeySim(): uneeded "redraw()" call commented out. When/if the call to LyXView::redrawWorkArea() in "lyxfunc.C:1610" is not needed anymore, this line should be uncommented out.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14456 a592a061-630c-0410-9148-cb99ea01b6c8
* src/LyXAction.C
(LyXAction::init): handle new LFUN_CLIPBOARD_PASTE
* src/insets/insettabular.C
(InsetTabular::doDispatch): ditto
* src/insets/insetbox.C
(InsetBox::doDispatch): ditto
* src/insets/insetert.C
(InsetERT::doDispatch): ditto
(InsetERT::getStatus): ditto
* src/insets/insetcharstyle.C
(InsetCharStyle::doDispatch): ditto
* src/BufferView_pimpl.C
(BufferView::Pimpl::selectionRequest): stuff selection, not clipboard
* src/mathed/math_nestinset.C
(MathNestInset::lfunMousePress): get stuff selection, not clipboard
(MathNestInset::lfunMouseRelease): clipboard -> selection in
commented code
* src/CutAndPaste.C
(cutSelection): ditto
* src/frontends/{qt3,gtk}/GuiImplementation.C
(GuiImplementation::newWorkArea): create new selection, not clipboard,
since the clipboard is now an object
(GuiImplementation::destroyWorkArea): destroy selection, not clipboard
* src/frontends/{qt4,qt3,gtk}/GuiSelection.h: new, copied from
GuiClipboard.h
* src/frontends/{qt4,qt3,gtk}/GuiSelection.C: new, copied from
GuiClipboard.C
* src/frontends/{qt3,gtk}/GuiImplementation.h
(selection): new accessor for selection_
(selection_): new, the global selection object
* src/frontends/{qt4,qt3,gtk}/Makefile.am: add GuiSelection.C and
GuiSelection.h
* src/frontends/{qt4,qt3,gtk}/GuiClipboard.C
(GuiClipboard::get): return clipboard, not selection
(GuiClipboard::put): stuff clipboard, not selection
* src/frontends/{qt4,qt3,gtk}/GuiClipboard.h
(haveSelection): remove (this is now in GuiSelection)
* src/frontends/{qt3,gtk}/GuiClipboard.h
(old_work_area_): remove, since it is not needed anymore
* src/frontends/gtk/ghelpers.C
(getGTKStockIcon): handle LFUN_CLIPBOARD_PASTE
* src/frontends/Clipboard.h
(haveSelection): remove (this is now in Selection)
* src/frontends/qt4/GuiImplementation.[Ch]
(GuiImplementation::selection): new accessor for selection_
* src/frontends/Gui.h
(selection): New accessor for the global selection object
* src/frontends/Selection.h; new, copied from Clipboard.h
* src/frontends/Makefile.am: add Selection.h
* src/text3.C
(various): s/clipboard().haveSelection/selection().haveSelection/
(LyXText::dispatch): handle LFUN_CLIPBOARD_PASTE
(LyXText::getStatus): ditto
* src/lfuns.h: new lfun LFUN_CLIPBOARD_PASTE
* lib/ui/stdmenus.ui: add new lfun LFUN_CLIPBOARD_PASTE
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14408 a592a061-630c-0410-9148-cb99ea01b6c8
* rowpainter:
- paintText: take the painter as an argument
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14384 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/WorkArea:
- processKeySym(): new method that should be used by all frontends
instead of buffer_view_->workAreaKeyPress().
* frontends/qt4/GuiWorkArea:
- keyPressEvent(): call WorkArea::processKeySym() instead of
buffer_view_->workAreaKeyPress().
* frontends/gtk/GWorkArea.C:
* frontends/qt3/QContentPane.C:
- call WorkArea::processKeySym() instead of
buffer_view_->workAreaKeyPress()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14383 a592a061-630c-0410-9148-cb99ea01b6c8
* frontends/LyXView:
- redrawWorkArea(): new temporary method called from within
BufferView::pimpl::update() that calls WorkArea::redraw()
in order to do the actual screen redrawing.
* frontends/WorkArea:
- the redraw() method now check if the the attached bufferView
needs a screen redraw().
* BufferView:
- needsRedraw(): new method for WorkArea::redraw()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14381 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/controllers/ControlPreamble.[Ch]:
remove files, since this controller was only used
by the xforms frontend
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14352 a592a061-630c-0410-9148-cb99ea01b6c8
- Change unsigned -> signed
- Change signed -> unsigned
- Add a cast or two (really few of those)
- Remove/comment out unused variables
- Comment out unused arguments
- Add missing cases to switches.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14344 a592a061-630c-0410-9148-cb99ea01b6c8
* src/main.C
(main): return LyX::exec()
* src/frontends/{gtk,qt3,qt4}/lyx_gui.C
(lyx_gui::exec): Change return value to int
(lyx_gui::start): ditto
* src/frontends/qt[3,4]/lyx_gui.C
(lyx_gui::exit): Call QApplication::exit instead of ::exit, this
hack is not needed anymore
* src/frontends/lyx_gui.h
(lyx_gui::exec): Change return value to int
(lyx_gui::start): ditto
* src/lyxtextclasslist.[Ch]
(LyXSetStyle): SChange return value to bool and don't call ::exit
* src/lyx_main.C
(showFileError): Don't exit anymore
* src/lyx_main.[Ch]
(LyX::exec): Change return value to int
(LyX::priv_exec): ditto
(LyX::exec2): ditto
(LyX::init): Change return value to bool
(LyX::readRcFile): ditto
(LyX::readUIFile): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14339 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView, BufferView::pimpl:
- metrics_info_: private variable holding ViewMetricsInfo
- viewMetricsInfo(): accessor function
- updateMetrics(): renamed from metrics(), sets metrics_info_
- update(): change to use updateMetrics()
* frontends/WorkArea:
- redraw(): get the ViewMetricsInfo through accessor to BufferView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14331 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView,BufferView::Pimple:
- workArea_ removed
* frontends/LyXView:
- now contains a pointer reference to the current
WorkArea instead of the BufferView.
- workArea(): temporary access method
* frontends/WorkArea:
- bufferView(): new access methods.
* GuiImplementation: updated due to above changes
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14329 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/os.[Ch]
(python): new function, return the python command
* lib/lyx2lyx/lyx_1_5.py
(revert_font_settings): replace tabs with spaces
The rest is simply s/python/python -tt/ and
s/"python"/lyx::support::os::python()/ where appropriate.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14270 a592a061-630c-0410-9148-cb99ea01b6c8
- natbib style (the combox) works
- when moving/up down the item stays selected (allowing sequential ups/downs)
- when deleting the next selected entry gets focus (allowing sequential deletes)
- the info is now shown and updated
- find subsets the available entries as you type
- no additional find dialog (removed QCitationFind.ui)
- selecting with double-click
- removal of unused: Citation class, toVector() function
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14252 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/xforms/FormSpellchecker.C (update):
* src/frontends/qt[34]/QSpellchecker.C (update_contents): fix bug
2218: Spellchecker doesn't pop up dialogue window for the first
misspelled word.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14246 a592a061-630c-0410-9148-cb99ea01b6c8
* lyx_main.C set width and height to 0
* frontends/qt3/lyx_gui.C test on 0
* frontends/qt4/lyx_gui.C test on 0
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14235 a592a061-630c-0410-9148-cb99ea01b6c8
* QLPainter::start() now re-initialize qp_
* QLPainter::end() now end qp_
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14184 a592a061-630c-0410-9148-cb99ea01b6c8
* qt4/Application.[Ch]: was not merged (GUI API cleanup merge) for an unknown reason
* qt4/clipboard.C: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14153 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/lyx2lyx/LyX.py (format_relation): add file format 247 (from Georg BAUM).
* lib/lyx2lyx/lyx_1_5.py: add convert_font_settings, revert_font_settings (from Georg BAUM).
* lib/chkconfig.ltx: Test for newly supported font packages
* lib/doc/LaTeXConfig.lyx.in: document newly supported font packages
* lib/doc/UserGuide.lyx: document new UI.
* lib/doc/Extended.lyx: update PostScript font documentation
* development/FORMAT: document file format change 246->247.
* src/tex-strings.[Ch]: new strings tex_fonts_roman, tex_fonts_sans,
tex_fonts_monospaced (with GUI equivalents).
* src/buffer.C: Format up to 247.
* src/bufferparams.C:
new params fontsRoman, fontsSans, fontsTypewriter, fontsDefaultFamily,
fontsSC, fontsOSF, fontsSansScale and fontsTypewriterScale
(LyXFont const BufferParams::getFont): consider switch of default family.
(string const BufferParams::loadFonts): new method to get all the LaTeX
font stuff done.
* src/paragraph.C
(LyXFont const Paragraph::getFont):
(LyXFont const Paragraph::getLabelFont):
(LyXFont const Paragraph::getLayoutFont): user buffer's not textclass's
default font
* src/text.C
(int LyXText::leftMargin):
(int LyXText::rightMargin): user buffer's not textclass's default font
* src/text2.C
(LyXFont LyXText::getFont):
(LyXFont LyXText::getLayoutFont):
(LyXFont LyXText::getLabelFont): check if the family of the default document
font has been customized.
* src/frontends/gtk/GDocument.[Ch]: implement new font ui (from Georg BAUM).
* src/frontends/gtk/glade/document.glade: implement new font ui (from Georg BAUM).
* src/frontends/qt3/Makefile.dialogs: add new FontModuleBase
* src/frontends/qt3/ui/FontModuleBase.ui: new File
* src/frontends/qt3/ui/TextLayoutModuleBase.ui: remove font widgets
* src/frontends/qt3/QDocument.C
* src/frontends/qt3/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/Makefile.dialogs: add new FontUi
* src/frontends/qt4/QDocumentDialog.[Ch]: implement new font ui
* src/frontends/qt4/ui/FontUi.ui: new File
* src/frontends/qt4/ui/TextLayoutUi.ui: remove font widgets
* src/frontends/qt4/ui/compile_uic.sh: add new FontUi
* src/frontends/xforms/FormDocument.[Ch]: implement new font ui
* src/frontends/xforms/forms/form_document.fd: add new font tab.
* src/frontends/controllers/ControlDocument.[Ch]
(char ControlDocument::fontfamilies):
(char ControlDocument::fontfamilies_gui):
(bool ControlDocument::isFontAvailable):
(bool ControlDocument::providesSC):
(bool ControlDocument::providesOSF):
(bool ControlDocument::providesScale): new methods, providing font info.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14143 a592a061-630c-0410-9148-cb99ea01b6c8
Don't use multiple QPainter::begin on the same QPaintDevice.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14101 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyx_cb.C
(quitLyX): lyx_gui::exit takes now an argument
* src/frontends/{gtk,xforms}/lyx_gui.C
(lyx_gui::parse_init): rename to lyx_gui::exec and call LyX::exec2
(void lyx_gui::exit): add exit status argument
* src/frontends/qt{3,4}/lyx_gui.C
(cleanup): new function for pointer cleanup
(lyx_gui::parse_init): rename to lyx_gui::exec and call LyX::exec2,
turn static variables into automatic variables
(void lyx_gui::exit): add exit status argument
(start): Use cleanup()
(exit): ditto
* src/frontends/lyx_gui.h
(parse_init): remove
(exec): new
(exit): Take exist status argument
* src/lyx_main.[Ch]
(LyX::priv_exec): split into LyX::priv_exec and LyX::exec2
* src/lyx_main.C
(lyx_exit): New, choose the right exit function
(showFileError): call lyx_exit
(LyX::queryUserLyXDir): ditto
(LyX::init): ditto
(LyX::priv_exec): ditto
(LyX::priv_exec): Replace want_gui by lyx_gui::use_gui
(LyX::priv_exec): replace lyx_gui::parse_init by lyx_gui::exec and
exec2
(LyX::init): Replace gui argument by lyx_gui::use_gui
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14036 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/ALLFRONTENDS/lyx_gui.C: use passed width/height/posx/posy in lyx_gui::start
* src/frontends/lyx_gui.h: prototype change for lyx_gui::start
* src/lyx_main.C: determine windows size and position from lyxrc or session.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13953 a592a061-630c-0410-9148-cb99ea01b6c8
TODO: reorganize this code. In particular make sure that this advise from Qt documentation is respected:
Since the QApplication object does so much initialization, it must be created before any other objects related to the user interface are created.
Right now this is not the case. For example, "FontLoader::initFontPath()" is called before the QApplication creation. Moreover, I suspect that a number of global variables contains Qt object that are initialized before the passage through parse_init(). This might also explain the message displayed by Qt that caused the hanging:
QObject::killTimer: timers cannot be stopped from another thread
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13948 a592a061-630c-0410-9148-cb99ea01b6c8
"Don't view/edit this format", and 'auto' means "Use the default viewer/editor".
* src/format.C
(fixCommand): Change semantics: "none" is equal to "", and "auto"
is removed if canAutoOpenFile returns false.
* src/frontends/xforms/FormPreferences.C
(FormPreferences::SpellOptions::apply): "none" -> ""
* src/lyxrc.C
(LyXRC::read): "none" -> ""
* lib/doc/Customization.lyx: Document the autoopen feature
* lib/configure.py
(checkProg): add optional not_found argument, defaulting to 'none'
(checkViewer): new, equivalent to checkProg with not_found = 'auto'
(checkFormatEntries): call checkViewer instead of checkProg for
viewers and editors
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13929 a592a061-630c-0410-9148-cb99ea01b6c8
qt4/qfont_loader.h: reverted to last version and added comment about pointer reference.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13927 a592a061-630c-0410-9148-cb99ea01b6c8
(document_): new flag, telling whether this is a document format and
we want to show this format in the export and view menus
(documentFormat): accessor for document_
* src/format.h: Add some documentation
* src/frontends/qt3/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new documentCB checkbox
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt3/ui/QPrefFileformatsModule.ui: Add documentCB checkbox
* src/frontends/qt4/QPrefsDialog.C
(QPrefsDialog::QPrefsDialog): handle new documentCB checkbox
(QPrefsDialog::switch_format): ditto
(QPrefsDialog::updateFormatsButtons): ditto
(QPrefsDialog::new_format): ditto
(QPrefsDialog::modify_format): ditto
* src/frontends/qt4/ui/QPrefFileformatsUi.ui: Add documentCB checkbox
* src/frontends/xforms/FormPreferences.C
(FormPreferences::Formats::build): handle new check_document checkbox
(FormPreferences::Formats::input): ditto
(FormPreferences::Formats::Add): ditto
(FormPreferences::Formats::Browser): ditto
* src/frontends/xforms/forms/form_preferences.fd: Add check_document
checkbox
* src/lyxrc.C
(LyXRC::read): Remove compatibility code for 1.3 \format entries.
Read the new format flags (but don't require them for 1.4
compatibility)
(LyXRC::write): Write the new format flags
* src/MenuBackend.C
(expandFormats): Remove the hardcoded exception for image formats
and use Format::isDocument() instead
* lib/doc/Customization.lyx: Document auto viever/editor and the
"document format" flag
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13887 a592a061-630c-0410-9148-cb99ea01b6c8
* panelstack.C: automatic creation of parent category if not already created.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13886 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt4/qfontloader.C (initFontPath, ~FontLoader): add fonts in
lyxdir/fonts to system fonts in windows; remove them in destructor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13877 a592a061-630c-0410-9148-cb99ea01b6c8
atm this does not work because it depends on the order in which these entries were added.
now the order is alphabetical and things are messed up.
the attached patch adds the nr of the format/converter to the listwidgetitem as a type and uses that to get to the right details
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13864 a592a061-630c-0410-9148-cb99ea01b6c8
Can you move the SUBDIRS var back to the top of the file pleae.
Also EXTRA_DIST should be at the top.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13863 a592a061-630c-0410-9148-cb99ea01b6c8
* configure.ac: removed frontends/qt4/moc compilation.
* frontends/qt4/: moc files (*_moc.cpp) are now included at the end of relevant source file (*.C)
* SConscript: adapted to "moc included in .C file" change.
* frontends/qt4/Makefile.am: adapted to "moc included in .C file" change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13860 a592a061-630c-0410-9148-cb99ea01b6c8
* SConstruct: force the use of g++ under windows, and use the right libraries
* config/qt4.py: check QtGui4 etc as well.
* src/SConscript: link to the right libraries
* src/tex2lyx/SConscript: use the right libraries
* src/frontends/qt3/SConscript: manually moc .h files under windows
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13814 a592a061-630c-0410-9148-cb99ea01b6c8
adjust some commands according to the LyX naming conventions
(toggle-tooltip => tooltip-toggle, *-change(s) => change(s)-*)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13811 a592a061-630c-0410-9148-cb99ea01b6c8
browsebox is not build anymore and commented out in bulletsmodule
bullets are disabled in documentdialog: wasn't working before either
remove qt3support!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13809 a592a061-630c-0410-9148-cb99ea01b6c8
Index: src/frontends/qt4/QCitationDialog.C
Index: src/frontends/qt4/QCitationDialog.h
Index: src/frontends/qt4/ui/QCitationFindUi.ui
Index: src/frontends/qt4/QPrefsDialog.C
Index: src/frontends/qt4/QPrefsDialog.h
Index: src/frontends/qt4/ui/QPrefColorsUi.ui
Index: src/frontends/qt4/ui/QPrefCopiersUi.ui
Index: src/frontends/qt4/ui/QPrefFileformatsUi.ui
Index: src/frontends/qt4/ui/QPrefConvertersUi.ui
Index: src/frontends/qt4/QParagraphDialog.C
no more qt3 drag n drop:
Index: src/frontends/qt4/QWorkArea.C
as discussed on list:
Index: src/frontends/qt4/QLyXKeySym.C
Index: src/frontends/qt4/QLyXKeySym.h
bit of repair here:
Index: src/frontends/qt4/ui/QAboutUi.ui
Index: src/frontends/qt4/QAbout.C
bit of cleaning here (no separate color column, but rather icon)
Index: src/frontends/qt4/QBranches.C
got rid of this altogether:
Index: src/frontends/qt4/qcoloritem.C
Index: src/frontends/qt4/qcoloritem.h
Index: src/frontends/qt4/Makefile.am
+ filedialog to qt4 one
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@13805 a592a061-630c-0410-9148-cb99ea01b6c8
