* MathStream{.cpp, h}:
- replace bool dryrun() by enum output that also knows whether the stream is for instant preview
* InsetMathHull.cpp:
- tell the stream whether we use it for instant preview.
* MathString.cpp (write):
- gracefully catch encoding exception for instant preview.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30895 a592a061-630c-0410-9148-cb99ea01b6c8
6047: Lyx 1.6.3 unable to typeset the third chemical equation of the
file mhchem.lyx (package mhchem)
4043: mhchem support
5394: support for the mhchems's \ce command
The \ce and \cf insets are text mode environments that allow entering
spaces and mathmode commands. LyX leaves them alone and doesn't try to
be smart, i.e., the behaviour is exactly the same we had in the old days
with text-in-math mode environments, before the introduction of the
\ensuremath and \lyxmathsym macros. This means that in those environments
one has to know what he is doing, as LyX will not offer any protection.
The hack of enclosing \ce and \cf in a \text{} environment in order to
be able to enter spaces is no longer necessary.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30338 a592a061-630c-0410-9148-cb99ea01b6c8
LyX crashes when backward selecting during formula writing
The problem is basically that the anchor is not set (because there is no
selection going on) and BufferView::mouseSetCursor does not handle this.
* Cursor.cpp (anchor): return immediately when there is no selection.
* BufferView.cpp (mouseSetCursor): reset anchor before setting cursor
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30245 a592a061-630c-0410-9148-cb99ea01b6c8
Revert the previous fix and fix the DEPM regression.
This reverts r28910.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29248 a592a061-630c-0410-9148-cb99ea01b6c8
Make sure we jump to the next or previous change when we switch search direction. Without this patch, the same Change will be found and only the cursor is moved from the end (or begin) to the begin (or end) of the selection.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29115 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=5435
The code for this was already present, but was never reached.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28910 a592a061-630c-0410-9148-cb99ea01b6c8
[visual cursor] Crash when cutting a figure caption and moving the cursor.
Avoid negative positions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28629 a592a061-630c-0410-9148-cb99ea01b6c8
[visual cursor] Crash when moving left in table in an RTL document
Avoid negative positions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28626 a592a061-630c-0410-9148-cb99ea01b6c8
The problem was that, if the master is not opened, no respective guiDelegate exists, and the functions that update the toc do not trigger. The fix is to update the child's toc backend and toc items directly in such cases.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28551 a592a061-630c-0410-9148-cb99ea01b6c8
The setting of boundary need to take the paragraph's direction (LTR/RTL) into
account.
This bug was discovered by Vincent, while trying to solve bug #5061.
While this fixes the original manifestation of bug #5061, it doesn't really
solve the underlying issue, which is that on a boundary, after typing
Ctrl-Enter, the cursor is painted on the same line as the newline symbol
rather than on the new line. See bugzilla for further discussion of this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27225 a592a061-630c-0410-9148-cb99ea01b6c8
* Buffer: new updateTocItem() signal (with Delegates and GuiView associates).
* TocBackend: take care of the signal emission instead of the Cursor::checkBufferStructure()
* TocModel: new updateTocItem() method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26636 a592a061-630c-0410-9148-cb99ea01b6c8
anchor is incorrectly set to be equal to the cur. This is because comparing two
CursorSlices does not take into account the boundary property (because the
CursorSlice does not know this).
Patch by Vincent.
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg143572.html
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26393 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=5173
* Undo.cpp (beginUndoGroup, endUndoGroup): new methods.
(UndoElement): add group_id member
(UndoElementStack): when removing old undo entries, make sure to
remove whole groups.
(Undo::Private): add group_id and group_level (for nesting) members.
(doTextUndoOrRedo): new method. Apply _one_ UndoElement.
(textUndoOrRedo): call doTextUndoOrRedo on each element of the current
group.
(recordUndoFullDocument): put inside an undo group
* Cursor.cpp (beginUndoGroup, endUndoGroup): new methods.
* LyXFunc.cpp (dispatch): add calls to (begin|end)UndoGroup.
* lyxfind.cpp (replaceAll): use several recordUndo instead
of one recordUndoFullDocument.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26178 a592a061-630c-0410-9148-cb99ea01b6c8
Specifically, moved the functions which actually move left or right from Text
into Cursor, and changed the semantics so that they now return whether or not
the cursor has moved. The functions in Text now use the new functions in Cursor.
This change is being made in preparation of the Word-level visual movement.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24601 a592a061-630c-0410-9148-cb99ea01b6c8
The need for a LayoutPtr arises from the fact that (a) we do not want to give our clients a Layout &, since we do not want them to be able to change our Layout; but (b) we also need to be able to change which layout is ours. So we cannot store a Layout const &. Or so it seems to the compiler.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23522 a592a061-630c-0410-9148-cb99ea01b6c8
first argument after finalizing the macro. This also works with real
math macros.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23449 a592a061-630c-0410-9148-cb99ea01b6c8
* Inset::validate(): renamed to initView()
* InsetCommand:
- get rid of unneeded refresh() and updateButtonLabel_
- setParams(): call initView()
* InsetRef:
- implement initView()
- screenLabel(): transfer code to updateLabels()
- addToToc(): prefix name with BROKEN if the reference is broken.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23417 a592a061-630c-0410-9148-cb99ea01b6c8
Only when an LTR paragraph *ends with* an RTL chunk of text, movement was
incorrect in two ways:
1. After moving into the pargraph from the end, and then trying to move towards
the beginning of the paragraph, the cursor would immediately jump to the
previous pargraph.
2. If the cursor were placed inside the RTL text, and then we would move left
towards the beginning of the paragraph, upon reaching the end (beginning?) of
the RTL chunk, cursor would jump to the end of the paragraph, and then continue
as in (1).
(Same thing, of course, with the reverse situation, i.e., RTL paragraph ending
with LTR text).
We now deal with both of these cases correctly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23173 a592a061-630c-0410-9148-cb99ea01b6c8
places, i.e.
- BufferView::setMouseCursor,
- BufferView::mouseEventDispatch
- LyXFunc::dispatch
Before it was called from several dispatch handlers in the middle of the
dispatch process. Because the cursor might get invalidated, this is
not a good idea. We had plenty of crashes and odd behaviours because
of this as nobody really understood those cases.
This fixes (at least) #2069 and #4163.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23140 a592a061-630c-0410-9148-cb99ea01b6c8
* completion support for mathed
* experimental completion support for text
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23104 a592a061-630c-0410-9148-cb99ea01b6c8
in any case does not make sense. It's not an index in the sense of DocIterator.
* cosmetics
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22908 a592a061-630c-0410-9148-cb99ea01b6c8
avoidable ~5% overhead when loading the UserGuide. This is an attempt on
rectifying the situation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22532 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Cursor.cpp (selHandle):
- handle mark()
* src/Text.cpp (dissolveInset):
- switch mark off before using selHandle, just in case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22204 a592a061-630c-0410-9148-cb99ea01b6c8
"The idea of the beforeDispX/Y_ variables in the Cursor is to hold the position
of the cursor on screen before the lyxfunc is dispatched. But to get this the
metrics must be valid. It's updated in Cursor::dispatch before the dispatch
loop.
After inserting/deleting stuff (like when deleting the selected text before
inserting the alpha) the metrics are invalid. But the handler for the alpha
calls Cursor::dispatch after the deletion and hence the crash with your second
patch.
Here is a patch fixing that:
The beforeDispatchXY variable do not belong into the Cursor::dispatch because
Cursor::dispatch is often called "manually" by many handlers to some followup
action. So this logic must go somewhere else where it is sure that is not
updated after the metrics got invalidated."
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22193 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
* fixed some other unreported bug when the cursor is not inside or near the macro during fold/unfold
* fixed the bug that the cursor jumped into the first parameter when pasting a macro. This should only happen when the macro was entered interactively
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21611 a592a061-630c-0410-9148-cb99ea01b6c8
* split up the MathData::updateMacro method into the optional and normal parameter part
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21334 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
In the future, when Cursor has been fixed to work correctly with multiple views of the same Buffer, we could transfer the Undo owner from Buffer to Cursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21031 a592a061-630c-0410-9148-cb99ea01b6c8
* ParagraphMetrics::position_: new private member (and associated access method).
* TextMetrics:
- origin_: new screen position cache.
- use origin_ and ParagraphMetrics::position() instead of the parPos cache.
* Cursor:
- comment out buggy bruteFind() method, will work on that later.
* BufferView::updateMetrics(): refactor and simplify to use new cache and to gather everything SinglePar related.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20214 a592a061-630c-0410-9148-cb99ea01b6c8
- getFont() becomes TextMetrics::getDisplayFont()
- setCharFont() now needs a display font.
- setInsetFont() and setFont() now needs a BufferView, will be transferred to TextMetrics too.
- isRTL(): moved to TextMetrics
- isRTLBoundary(): ditto
- font_: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20014 a592a061-630c-0410-9148-cb99ea01b6c8
See also http://www.lyx.org/trac/changeset/19003
* BufferView.cpp (setBuffer): save selection before switching buffer
(mouseSetCursor): save selection before resetting it
(putSelectionAt): no need to save selection
* Cursor.cpp (selHandle): save selection before resetting it
* CutAndPaste.cpp (cutSelection, eraseSelection): save selection before
deleting it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19026 a592a061-630c-0410-9148-cb99ea01b6c8
up/down to tell the insets that the cursor left them. The
notifyCursorLeaves methods can set updateFlags to trigger a redraw.
* leave mathed with cursor up/down and get the math redrawn for the
decorations
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18773 a592a061-630c-0410-9148-cb99ea01b6c8
cursor size. It should fit to the setCurrentFont function because the
cursor tells the user which font will be used when typing characters.
Especially on RTL/LTR boundaries it should fit because it is
essential for the user to see which writing direction is active. This
patch implements a simplified version of setCurrentFont's logic to
archive this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18707 a592a061-630c-0410-9148-cb99ea01b6c8
dispatchers in mathed and text only do local work, i.e. only try to
move the cursor with their local knowledge, not globally as before in
the Cursor::goUpDown function before. The old approach used one of
brutefind functions as a last way out to really move the cursor up or
down. The result was some strange behavior that the nearest inset was
selected when jumping from math to text, not one in the next line.
2. removed LFUN_FINISHED_UP/DOWN, as there seem to be no effect and it
seems to be obsolete.
3. target_x is working again, mainly by adding a textTargetOffset_
member to the Cursor which keeps the difference between the target_x
and the actual position of the cursor on screen. As long as
pos+offset=target is fulfilled the target_x is not touched and the
cursor keep the column while going up/down.
4. moved the text cursor up/down code to the Cursor class, in analogy
to the mathed code.
5. For 1 it is necessary to know the cursor position before the
dispatch. So this data is added to the Cursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18569 a592a061-630c-0410-9148-cb99ea01b6c8
* Inset: new destroyed signal (copy ctor and operator= needed because of a signal is not copiable)
* CursorSlice:
- connect to inset destructor wherever possible
- invalidate(), isValid(): new method.
- inset_: now private
* DocIterator::fixIfBroken(): new method for properly fixing cursors.
* StableDocIterator::asDocIterator(): verify cursor sanity before creating it.
* Cursor::fixIfBroken(): now a simple wrapper around DocIterator::fixIfBroken()
* BufferView::setBuffer(): verify cursor sanity before restoring it.
* WorkArea::redraw(): verify cursor sanity of concurrent BufferView display.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18516 a592a061-630c-0410-9148-cb99ea01b6c8
- do not insert blank line for listings content.
* src/TextMetrics.cpp (setHeightOfRow):
- don't use parkip in Listings insets (bug 3624)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18399 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Cursor.cpp:
- new helper function parbreak that checks whether a blank line is
to be inserted or not (currently only relevant for ERT content)
- (selectionAsString): use parbreak instead of hardcoded "\n\n"
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18220 a592a061-630c-0410-9148-cb99ea01b6c8
This is a part of the fix for bug 3043.
I got the OK from Georg, that this patch doesn't introduce conflicts as it only sets the infrastructure.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18206 a592a061-630c-0410-9148-cb99ea01b6c8
