* src/buffer.C
(Buffer::makeLaTeXFile): move code from here ...
* src/bufferparams.[Ch]
(BufferParams::encoding): .. to this new method
* src/ispell.C
(to_iconv_encoding): new, convert from ucs4 to the encoding used by
ispell
(from_iconv_encoding): new, convert from the encoding used by ispell
to ucs4
(ISpell::ISpell): store buffer encoding
(ISpell::nextMiss): use from_iconv_encoding instead of from_utf8
(ISpell::check): use to_iconv_encoding instead of to_utf8
(ISpell::insert): ditto
(ISpell::accept): ditto
* src/ispell.h
(encoding): new member, store the buffer encoding
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16230 a592a061-630c-0410-9148-cb99ea01b6c8
needsUpdate() in src/lyx_main.C).
toFilesystemEncoding() is now used in all places where it is needed if I did
not forget anything.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16184 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer.C
(Buffer::save): Only try to make a backup if the buffer file already
exists. The try ... catch mechanism is fine, but when it was
introduced ot was overseen that copying a file could not only fail
because the destination dir does not exist, but also because the
source does not exist.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16121 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer.C
(Buffer::insertStringAsLines): Uncomment isPrintable test
* src/support/lstrings.C
(compare_no_case): Use char_type and not int for the docstring version
(ascii_tolower): Convert to a template
(compare_ascii_no_case): Do not use a template anymore, because we
need int for the string version and char_type for the docstring
version as intermediate type
(lowercase): Use towlower if possible
(uppercase): Use towupper if possible
* src/support/textutils.h
(isLetterChar): Use iswalpha if possible
(isPrintable): Use iswprint if possible
(isPrintableNonspace): Use iswprint and iswspace if possible
(isDigit): Use iswdigit if possible
* src/paragraph.C
(Paragraph::asString): remove obsolete FIXME
(Paragraph::transformChar): add FIXME
* configure.ac: Add definition of LIBC_WCTYPE_USES_UCS4 to config.h
* development/cmake/config.h.cmake: ditto
* development/scons/SConstruct: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15893 a592a061-630c-0410-9148-cb99ea01b6c8
labelstring_appendix in layout files
* src/text2.C
(LyXText::setLayout): Translate labelwidthstring for paragraph
(LyXText::getStringToIndex): labelwidthstring is now a docstring
* src/buffer.[Ch]
(Buffer::translateLabel): New method for translating a label if it
is not already translated by the user in the layout file
* src/lyxtext.h
(setParagraph): labelwidthstring is now a docstring
* src/support/lstrings.[Ch]
(bool isAscii): New utility function: Determine whether a docstring
contains only pure ascii
* src/text3.C
(LyXText::dispatch): setParagraph() now takes a docstring
* src/lyxlayout.C
(LyXLayout::read): Don't use from_ascii when reading labelstring_,
endlabelstring_ and labelstring_appendix_
* src/buffer_funcs.C
(setLabel): labelwidthstring is now a docstring
(setLabel): Use Buffer::translateLabel instead of Buffer::B_ to
translate labels
(expandLabel): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15855 a592a061-630c-0410-9148-cb99ea01b6c8
- new pimpled TocBackend member and associated accessors.
* toc.[Ch]: delete all toc related methods except outline.
* TocBackend:
- goTo(): deleted, this gets rid of the LyXView dependency
- made all accessors const.
* ControlToc:
- rework the controller to work exclusively with TocBackend.
- goTo(): now call LyXView::dispatch() directly
all other files: update with the TocBackend or ControlToc API changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15852 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.[Ch]
(getEncoding): rename to getFromLyXName
(getFromLaTeXName): new, it does what the name says
* src/buffer.C
(Buffer::makeLaTeXFile): Fix crash by using getFromLaTeXName instead
of getFromLyXName.
Avoid crash for unknown encodings.
* src/language.C
(Languages::read): Adjust to name change above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15703 a592a061-630c-0410-9148-cb99ea01b6c8
* src/encoding.h
(encoding_table): remove, this is no longer needed with unicode
(iconvName_): new member: name of the encoding in iconv syntax
* src/exporter.C
(Exporter::Export): Use return value of Buffer::makeLaTeXFile
* src/buffer.[Ch]
(Buffer::makeLaTeXFile): return whether the file has been created
successfully
* src/buffer.C
(Buffer::makeLaTeXFile): Use a docstream that converts to the correct
encoding
Display an error dialog is something went wrong
* src/bufferparams.C
(BufferParams::writeLaTeX): Undo the utf8 inputenc hack
* src/frontends/qt4/QDocumentDialog.C: Add some FIXMEs
* src/support/unicode.[Ch]
(eightbit_to_ucs4): New conversion function
(ucs4_to_eightbit): New conversion function
* src/support/docstream.[Ch]
(utf8_codecvt_facet_exception): Move to header and rename to
iconv_codecvt_facet_exception
(odocfstream): Take the encoding as argument
* src/support/docstream.C
(utf8_codecvt_facet): Generalize to other encodings than utf8 and
rename to iconv_codecvt_facet
* src/encoding.C: Remove obsolete tables
* src/output_latex.C
(TeXOnePar): Convert the paragraph to different encoding if needed
* lib/encodings: Remove obsolete tables
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15564 a592a061-630c-0410-9148-cb99ea01b6c8
Known problems:
- No space is output after a \hfill. I probably broke this with the
InsetCommand patch. I'll have a look later.
- Although the encoding is now UTF8 the arguments of the inputenc package
are still the old ones, so LaTeX will not run.
- Labels and references with non-ASCII characters are broken. This needs to
be fixed in lyx::support::escape(), but this is a file format change.
- Something seems to be wrong with index entries, but this is probably also
due to the InsetCommand changes.
Have fun!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15378 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer:
file format incrementation to 251
* src/insets/insetcharstyle.[Ch]:
- make show_label a param and save its state
- let all-insets-toggle togle the label in charstyles
* development/FORMAT:
document file format change
* lib/lyx2lyx/LyX.py:
add new file format
* lib/lyx2lyx/lyx_1_5.py:
remove char style label param on reversion to 250.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15345 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.[Ch] (changeRefsIfUnique): extend to handle bibitems
as well (the function takes a InsetCode argument now);
clean up by using InsetIterator.
* InsetMathHull.C (doDispatch): changeRefsIfUnique needs a
InsetCode argument now (bug 2744).
* insetlabel (doDispatch): changeRefsIfUnique needs a
InsetCode argument now.
* insetbibitem (doDispatch): use changeRefsIfUnique
(actual fix for bug 2744).
* insetcommand.[Ch]:
* insetcite.[Ch]: implement replaceContents, which is
used by changeRefsIfUnique.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15289 a592a061-630c-0410-9148-cb99ea01b6c8
* rename output_changes to outputChanges
* rename tracking_changes to trackChanges
* add FIXMEs for later revision
* remove trackChanges(); the CT data structure will always be set up
* decouple LFUNs changes-output/change-accept/change-reject/
all-changes-accept/all-changes-reject from LFUN changes-track
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15261 a592a061-630c-0410-9148-cb99ea01b6c8
* src/frontends/qt[34]/qt_helpers.[Ch]
(toqstr): add variant for docstring
(qstring_to_ucs4): Use docstring and port from qt4 to qt3
* Many other files: Many std::string -> lyx::docstring conversions
* src/support/lstrings.[Ch]
(subst): Add variant for docstring and char_type
(externalLineEnding): std::string -> lyx::docstring
(internalLineEnding): std::string -> lyx::docstring
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14871 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/docstring.[Ch]
(from_ascii): new conversion function
(from_utf8): new conversion function
(to_utf8): new conversion function
(operator==) new, compare docstring and ASCII C string
(operator!=) new, compare docstring and ASCII C string
* src/support/Makefile.am: add new file docstring.C
* development/scons/scons_manifest.py: ditto
* src/funcrequest.[Ch]
(argument): change name to argument_ and type to docstring,
add an accessor
(FuncRequest): Add two new constructors taking a docstring argument
* all other files: adjust to the FuncRequest changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14861 a592a061-630c-0410-9148-cb99ea01b6c8
catch exception thrown by boost::filesystem if copying to the
backup directory fails (fixes bug 2740: crash and dataloss if
the backup dir was invalid or not writeable).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14849 a592a061-630c-0410-9148-cb99ea01b6c8
