This avoids some duplicate code. Note that the return value of
Paragraph::getAlign had to be changed. I suspect it was set to char to
avoid reading one header file in Paragraph.h.
LyX assumes that everything in \lyxdeleted is struck out by ulem
and increases the corresponding counter. However, deleted display
math material is struck out using tikz. As we also take into
account the deletion of underlined display math (in order to
properly position such material vertically), we have to take
care that the count is correct.
It should be now possible underlining or striking out any kind
of math inset containing any math construct indigestible to ulem.
While this was already possible for inline math insets, they could
have break if an aligned environment was used, for example.
This is now possible also for diplay math. Even if this can be
nonsensical and not visually perfect, at least no latex errors
should be generated if one tries to.
Font changes are brought inside the \lyxdeleted macro, just before
outputting the latex code for the math inset. The inset writes a
signature before itself and this is checked by \lyxsout for recognizing
a display math. So, the font changes confuse \lyxsout, which also
swallows the first macro at the very start of \lyxdeleted. The result
is that the font changing command is not seen by latex and \sout is also
used to further strike out the formula already striked out by tikz.
This commit makes sure that the expected signature actually appears
just after the opening brace of \lyxdeleted. It also accounts for a
paragraph break occurring just before the math inset, in order to not
introduce too much vertical space, which is noticeable when using
larger font sizes.
Showing deleted display math by enabling "Show Changes in Output" was
only possible with dvi (through dvipost). Although LyX strikes out
such formulas on screen, it was impossible obtaining an output
directly using pdflatex (or other engines producing pdf) because
ulem cannot cope with display math material and gives errors.
The solution is to strike out by ourselves such deleted formulas.
I took into account several options. One of them would produce
an output similar to dvipost (which strikes out each element), but
would have required much more changes in the output routines.
Eventually, I opted for using tikz, which gives a more clean
output (as it requires to simply adding a preamble and a postamble
to the latex code of any displayed math, instead of a mark up
tailored to each particular math construct). The look of the pdf
output is similar to the way LyX strikes out the equations on screen.
This enables error reporting for the preamble, provided the preamble is written
using the new InPreamble layouts.
In the future, I find it preferable to deprecate the usual preamble in favour of
InPreamble layouts rather than implementing error reporting for the usual
preamble. This requires some improvements to code editing in the buffer view
first (line breaking behaviour, syntax highlighting).
texstring is a pair of a docstring and a corresponding TexRow. The row count in
the TexRow has to match the number of lines in the docstring.
otexstringstream is an output string stream that can be used to create
texstrings (i.e. it's an odocstringstream that records the TexRow information
and let us extract a texstring from it).
texstrings can be passed around and output to otexstream and otexrowstream,
which produces an accurate TexRow information by concatenating TexRows.
dealing properly with the paragraph separator tag.
We really need to use that tag as a kind of general marker for which
tags we're responsible for in a given paragraph and which tags we are
not. So the changes to InsetText.cpp use the tag as that kind of marker.
Note that, as of this commit, the User Guide again exports without any
kind of error. I haven't yet checked the other manuals.
This fixes bug #8022.
The initial values for maxasc and maxdes (renamed from maxdesc) is obtained as a maximum of max ascents/descents of all row elements.
This allows to get rid of Paragraph::highestFontInRange and FontList::highestInRange.
Some auxilliary variables declarations are also moved to where they are needed.
(#8738)
For efficiency, we add a new flag to the buffer indicating when changes are
present. This flag is updated at each buffer update, and also when explicitly
requested via a dispatch result flag.
This was a regression of 8aa37c43. I did not take into account that end_pos
could be -1, so the code that checked whether a pair of braces needs to be
inserted between two hyphens did not work for that case. Now we check for
the length of text_, which should be done anyway, and only take end_pos into
account when it is not -1.
There are two regressions that are fixed here:
* empty rows at the end of a paragraph (think after newline at end of
paragraph or empty line in Verbatim) do not have an end-of-par
marker. This is fixed by removing the early return in breakRow and
letting the whole function be executed. This requires to relax an
assertion in Paragraph::fontSpan. It makes sense here to query
position at the end of the paragraph.
* a newline at the end of a paragraph will be followed by and
end-of-par marker. This is fixed by skipping the end-of-par marker
when a new row has been requested.
Unfortunately the footmisc package does not work together with hyperref:
Before 0bf8b8a1, a footnote in a section title was created as a link in pdf
outpout, after 0bf8b8a1 ist was no link anymore. For now we revert to the old
code, and wait until the footmisc and hyperref packages are made compatible.
Prevent encoding changes whenever the TeX engine is XeTeX or LuaTeX,
as XeTeX/LuaTeX use only one encoding per document:
* with useNonTeXFonts: "utf8plain",
* with XeTeX and TeX fonts: "ascii" (inputenc fails),
* with LuaTeX and TeX fonts: only one encoding accepted by luainputenc.
+1 no needless encoding switches
+1 runparams.encoding matches the correct encoding at any time
+1 less complicated code.
-1 there may still be problems with CJK (possibly impossible to
solve for Xe/LuaTeX with TeX fonts).
For LuaTeX & TeX fonts, the complete document uses the encoding
of the global document language.
See also #9740.
Actually, the changed tests were used to prevent overwriting the encoding
changed in Buffer::writeLaTeX with a language-default encoding.
This is still required for XeTeX with TeX-fonts unless a proper solution is found.
Documents with more than one encoding and TeX-fonts fail with LuaTeX,
as "luainputenc" can only handle one encoding.
With inputenc == "auto" or "default", the encoding changes with
the language and must be reset after an eventual language switch in insets
or environments (see #6216).
However, whether we need to do this does not depend on 8-bit TeX vs. LuaTeX
but on the possible use of more than one encoding for the document.
With "nonTeXFonts", the encoding is utf8,
LuaTeX with TeX fonts requires encoding handling similar to 8-bit TeX.
(Additionally, the value of "params.inputenc" could be tested: if it is
not "auto" or "default", we have just one common encoding and could skip
the reset as well.) Not sure how much time this saves, though.
Fixes output for 3 of the 4 test lyx-files.
Includes "FIXME"s at places where further action is required to get the XeTeX
export right but I don't know how.
This is preliminary work for extending the cursor<->row tracking to math.
TexRow used to associate, to each row, a location id/pos where id determines a
paragraph and pos the position in the paragraph.
TexRow now associates to each row a list of entries, text or math. A math is a
pair uid/idx where uid will determine a math inset and idx is the number of the
cell.
The analogy id/pos<->inset/idx works better than the analogy id/pos<->idx/pos,
because what matters for the TexRow algorithm(TM) is the behaviour in terms of
line breaks.
This only improves the source view and the forward search, not the error report
and the reverse search (though this could be easily added now).
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
These were all flagged by "(style) The scope of the variable 'x' can be reduced."
Narowing the scope improves readability, and if it is in a loop then the
compiler will be clever enough to produce efficient code, we do not need
manual optimization for POD types.
There is a mismatch between the way text is tokenized in Row objects
and the way it is shown on screen. When metrics are computed,
continuous spell checking has not been done yet. Yet, the row painter
explicitly breaks words at spell status boundaries. This creates
problem with a text like "PMP," (see bug #9649), where there is a
negative kerning before the comma.
This is solved by not taking in account spell status when drawing
text, and drawing spell underlines separately.
* replace Paragraph::isSameSpellRange with new method getSpellRange.
* merge RowPainter::paintChars into RowPainter::paintFromPos
* move the actual text painting code into the new paintTextAndSel.
* merge some code from paintFromPos to paintMisspelledMark
* in paintMisspelledMark, scan the string which needs to be annotated
and add dashed line below text marked as misspelled.
Fixes bug #9649.
