The current code is not able to unset an environment variable, only to set it to an empty value. This patch refactors a bit the Message class and uses a new EnvChanger helper class that allows to change temporarily an environment variable and that is able to unset variables if needed.
The patch also adds new functions hasEnv and unsetEnv in environment.cpp.
Open issues:
* there may be systems where unsetenv is not available and putenv("name=") does not do the right thing;
* unsetenv may lead to leaks on some platforms.
* when using unsetenv, we may need to remove strings from the internal map that setEnv uses.
This file documents which tests are expected to fail. It can be used
to quickly tell if a regression has occurred. This is also useful when
first running tests to get an idea of whether some tests are failing
because of missing dependencies.
keytest.py now only prints one time the command that it is executing for
an assert. The command is already printed in the function responsible
for executing it, so it is not necessary to print the command before
calling that function.
* some functionality is in new modules now
new header locations and library names: QtConcurrent and QtWidgets
* method setResizeMode is renamed to setSectionResizeMode
* deprecated QAbstractItemModel::reset() is dropped now
* platform specific code like QApplication::syncX() is not common anymore
* QString::fromAscii() is dropped now
* some QDesktopServices methods has been moved to QStandardPaths
This test should fail because #7673 is not yet fixed in trunk.
Note that it is fixed in branch.
This is the first autotest that uses an existing .lyx file,
bug-7673.lyx.
If the test opens an existing .lyx file and crashes, it will leave
around a .emergency file. If a test with that same name is run again,
LyX will try to recover the .emergency file, which could throw
off the test.
This is implemented for both CMake and autotools.
LyX 2.0.x supports currently 147 LaTeX-packages. When LyX is first installed on a PC it took therefore about 10 minutes to install all supported and required packages. With the new installation method the installation speed only depends on the Internet speed and lasts with an average bandwidth now only 3.5 minutes.
(chkconfig.ltx asks LaTeX for each package separately and after each package installation the file name database of LaTeX was rebuild. And that cost a lot of time/CPU power)
To reproduce some bugs, tests need to open an existing LyX file. This
is now possible with CMake and is consistent with testing under
autotools in the sense that the .lyx file is referred to in the test
by being in the parent directory.
If the test is named bug-XXXX-in.txt and there exists a file
bug-XXXX.lyx, that file will be copied to the parent directory of
out-home in the build directory.
LaTeX.nsh:
- fix a MiKTeX configuration Problem on 64bit Windows issue discovered in #8417
- don't overwrite MiKTeX's package repository the user might have set purposely
- remove some unused code and simplify some code
- update to JabRef 2.9.2
- LaTeX.nsh: fixe http://nsis.sourceforge.net/Download
- settings.nsh: adapt path so that one needs to adapt less when using the installer source zip file
- add a readme how to build the installer
Some macros defined by wasysym.sty work only in text mode: They either
produce an error in math mode, or wrong output. These symbols are now marked
as text symbols, so that no \ensuremath is created for LaTeX export if they
appear inside \text{}, and the correct images are created.
development/tools/generate_symbols_images.py now checks for each symbol in
lib/symbols whether its image is listed in lib/Makefile.am and whether it has
a toolbar entry in lib/ui/stdtoolbars.inc.
- LaTeX.nsh: assure that if MiKTeX is installed for all users also the missing packages will be installed during the configuration for all users
- configure.nsh: run configure.py twice to assure that really all missing packages are checked/installed
- LaTeX.nsh: fix bug that installer stopped working if LyX was installed the first time on a computer
- init.nsh:
- fix failing installation of Slovakian spellcheck dictionary
- expand list of available dictionaries as requested by users
- dictionaries.nsh: prevent case that the installer could run an infinite loop if the installation of dictionaries was interrupted
- settings.nsh: use a HTTP repository for MiKTeX instead of FTP because many companies deny FTP access by default in their firewalls
The old layouts are still there (marked as deprecated). The new ones are more or less correctly reverted (polishment required), but the old ones not yet converted to the new. Once this is done, a further file format change should be made.
The fix is basically mechanical, the additional code for fraction like insets
with three arguments was stolen from \unitfrac. As any math package,
stackrel.sty needs a buffer parameter to switch it off.
I also added the two stackrel flavours to the toolbar.
The \frametitle command is less convenient to use than the \frame argument, but it provides more options (overlay/action and short title). We thus provide this additionally to the option, like beamer itself does.
This has a list-like structure (with \onslide item commands). The previous implementation was rather useless, since it required lots of ERT. Since the new implementation is so different, we use ERT for conersion/reversion.
The lyx2lyx routines are not yet perfect, though.
The stmaryrd package adds support for lots of math symbols, using a font
designed to accompany the computer modern fonts. The changes in detail:
- Fix generate_symbols_list.py to work with stmaryrd.sty. It loooks like it
was automatically translated from a perl version and never used.
- Generate the new symbols in lib/symbols using generate_symbols_list.py and
add some manual adjustments
- Generate stmary10.ttf by a simple ttf export from stmary10.sfd with fontforge
- Add license info for stmary10.ttf
- Create a test file with all symbols from stmaryrd.sty. Actually it would be
nice to have this for the other fonts as well.
- The mechanics: lyx2lyx, tex2lyx, font machinery etc.
This patch puts all projects into subfolders (at least for MSVS). In this
way, there is a better overview (especially if the number of test projects
will be increasing).
Many test are not running, but if changed the '-dbg xxx' to '-dbg any'
then all of sudden they pass ...
(The buffered output of lyx is often disrupted too early with 'kill -9',
so the expected data are not available for the appropriate test)
Now that we have module support for literate programming, it is possible to do a noweb cleanup. This is basically a patch from Kayvan Sylvan:
- get rid of literate-xxx classes
- rename Scrap to Chunk, since this is the name noweb doc uses (Scrap is from nuweb)
- update lyx file format and add lyx2lyx support for gettting rid of literate-xxx classes
- update documentation
On the top of it, update tex2lyx to
- avoid creating files with literate-xxx class
- fix conflict between parsing << as a quote and parsing it as a Chunk
- create Chunk layouts instead of Scrap ones.
This is already done by the program pdfview every time it is called. This additionally fixes the bug that viewing PDF files could fail if Acrobat was not the default PDF viewer of the system while LyX was installed, but became later the default PDF viewer.
- to be able to support Adobe Reader/Acrobat XI I had to use new binaries for opening/closing PDFs. That way I found the solution for a long standing and super annoying PDF viewing bug (not 100% perfect but works for more than 95% of the cases, while formerly the view failed for all cases where LaTeX run more than once when updating a PDF view)
- avoid doubled semicolon in LaTeX editor path list
- correct path to the JabRef installation folder in LyX's PATH
- updated to JabRef 2.8.1
- rename the installer executables from LyX-205-x-Bundle.exe
- fix uninstallation of Metafile2EPS pinter
- fix un/installation of JabRef if the bundle version is executed without admin privileges
- some whitespace fixes
- dictionaries.nsh: code documentation and simplification
- lyx.nsi: comment out currently unused code
- init.nsh: some corrections and fix bug that info that JabRef and MiKTeX were installed together with LyX was deleted before the uninstaller was really run
- LaTeX.nsh: documentation and fix a bug (for an unknown reason SHCTX can be used to read and delte but not to write in the registry)
- gui.nsh: enable descriptions
- detection: move dictionary code to dictionaries
- detection.nsh:
- fixed detection of the LaTeX source file editors
- removed support for obsolete LaTeX source file editors
- init.nsh:
- don't allow to install an older LyX version over a newer one
- support dictionaries for new languages that will be supported by LyX 2.1
- remove registry entries of current LyX version when installing a newer version over it
- remove the error-prone method of finding dictionaries by renaming some
- add new dictionaries for future LyX 2.1 (more to come)
- update and correct some dictionary sizes
- fix detection of the possible 64bit programs jedit, Gimp, GhostScript and GSview
- remove detection of old Vim version
It is possible to install a newer lyX over an existing older LyX installation, but we cannot allow to install over the same lyX version. Therefore output the version number if this error message is shown
- settings.nsh: update to LyX 2.0.5
- thesaurus.nsh:
- don't download already existing dictionaries when installing over an existing LyX installation
- the list of available dictionaries is 120
- detection:
- detect existing dictionaries
- fix detection of Gimp and Photoshop
- init.nsh: detect existing dictionaries and modify the list of available dictionaries accordingly in the installer sections
Creating LYX_DATE dynamically at configure-time caused unwanted recompilation
of the whole directories (src + src/tex2lyx) because all the relevant objects
were dependent of a common file (flags.make in case of "Unix makefiles") which changed
accordingly.
There is now a new include (lyx_date.h, with only one definition)
Nothing changes for automake, since in this case LYX_DATE is defined in config.h
Just some comments on the patch:
- The executable name has to match the information in Info.plist (development/MacOSX/Info.plist.in and CMakeLists.txt). The autoconf config/lyxinclude.m4 file has been modified to make it work with autotools.
- The process to build OS X bundle is to first add all the files to be included to the bundle when calling add_executable (src/CMakeLists.txt) and then by calling setting the source file property of each of these files (development/cmake/Install.cmake, l.14) so that the files are properly located into the bundle. This is also why Install.cmake has to be included two times in src/CMakeLists.txt (once to build the list of files, once to set the location of the list of files).
- in CMakeLists.txt there is a line
install(CODE "set(BU_CHMOD_BUNDLE_ITEMS 1)")
What it does is to fix the owner permissions within the bundle - this is necessary because some libraries are copied within the bundle and might be owned by root
- An empty qt.conf is included in the bundle so that QT does not try to link to other QT libraries (which will not be included in the bundle)
- In development/cmake/Install.cmake, some OS X specific files (*.sdef, qt.conf, *.icns) have to be included in the bundle
Benjamin
Handle option "LYX_DEVEL_VERSION" to add the preprocesor definition of DEVEL_VERSION
The effect should be alike the configure parameter "--enable-build-type=dev"
With non-TeX fonts, you can select a 'Non-TeX Font Default' math font, which simply loads unicode-math without actually selecting a math font, this then uses the default math otf font, currently Latin Modern. Other fonts still need to be set manually in the preamble, via \setmathfont.
The implementation suppresses unneeded package requests from unicodesymbols, but the output still uses macros instead of full unicode (both is possible with unicode-math).
The whole thing is a proof of concept, and it needs to be tested. I have tested it with the math manual, which compiles and seems to display correctly if I remove some hardcoded package loadings. OTOH I have not much experience with math.
This addresses #7449 partly.
This addresses #6543 by adding an option to prevent fonts such as Palatino and Times to automatically adapt the math font (IOW it lets you load the text font only for a bunch of fonts where this is easily possible).
Furthermore it adds an interface to select a specific math font, which is defined in latexfonts. Currently, this is only euler (the only one I know), but if there are other math-only tex fonts, they can be added easily (but note that this changes the file format).
Non-TeX math fonts are not yet supported. Eventually, unicode-math support can use the existing UI, but this is not on my agenda.
In order to interact with native osx applications, AppleScript support is a plus.
Here is a patch that makes LyX respond to a simple command (run) and that allows to communicate with LyX as with the LyX client.
Example of use:
tell application "LyX" to run "server-get-filename" with argument ""'
returns
message:/Users/bpiwowar/newfile1.lyx, code:0
with a message and the error code
The LaTeX font information are now centralized and outsourced. This removes a lot of hardcoding and duplication and makes it easier to support new LaTeX fonts.
- the proposed install folder is now "LyX 2.0" as discussed
- promote our wiki and also our website (as almost all other programs do as well and which is quite helpful)
- uninstall.nsh: don't uninstall the user preferences by default
- configure.nsh:
- set also the .lyx file association when the user is not admin
- fix the path in which the LyX start menu shortcut is executed
- thanks to the new version of ImageMagick no longer admin permissions are required
- init.nsh: iron out 2 non-admin residues
- language files: add missing entries and remove some unused ones
Setting up .gitignore or .git/info/excludes is something that should
be done. Not doing it makes it a lot harder to see actual new files
that should be added.
Signed-off-by: Lars Gullik Bjønnes <larsbj@gullik.org>
- fix an uninstallation bug that user settings were not remove if requested
- whitespace fix
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40814 a592a061-630c-0410-9148-cb99ea01b6c8
- fix a bug in detection of Gnumeric
- update to latest third-party products
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40688 a592a061-630c-0410-9148-cb99ea01b6c8
To avoid duplicity, remove natbib_authoryear and natbib_numerical
and replace them by natbib, and keep track of the engine `type'
in the new \cite_engine_type document setting. This will make it
easier to add more citation engines.
LyX format incremented to 424.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40592 a592a061-630c-0410-9148-cb99ea01b6c8
- fix bundle installer so that MiKTeX is installed before LyX
- fix some ImageMagick settings
- cleanups and visual feedback for new installations
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40533 a592a061-630c-0410-9148-cb99ea01b6c8
This holds the name of a BibTeX style file for now. Any BibTeX inset
can set the style to "default" to use the document-wide style.
LyX format incremented to 420.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40484 a592a061-630c-0410-9148-cb99ea01b6c8
(But even with these fixes, the script fails, see my mail.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40190 a592a061-630c-0410-9148-cb99ea01b6c8
The init_package before easyParse is necessary to initiate the default
values for userdir and sysdir, which are now part of the help message.
This step would be necessary anyway if we ever internationalize tex2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39799 a592a061-630c-0410-9148-cb99ea01b6c8
