we got a consensus on this on the list.
Some calls of haveSelection are still missing, but we need to decide the
"persistent selection" question before those can be implemented properly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16572 a592a061-630c-0410-9148-cb99ea01b6c8
* src/lyxtext.h
* src/text3.C
(pasteString): Change argument to bool
* src/text3.C
(LyXText::dispatch): (LFUN_PASTE): Paste plain text as paragraphs,
not as lines
(LyXText::dispatch): Adjust to pasteString change
* lib/bind/cua.bind:
* lib/bind/sciword.bind:
* lib/bind/mac.bind: Move shortcuts from "clipboard-paste paragraph"
and "primary-selection-paste paragraph" to "primary-selection-paste"
and "clipboard-paste", since the "paragaph" versions are used in
LFUN_PASTE and middle-mouse-button paste. Now "primary-selection-paste"
has the same shortcut it always had, and "clipboard-paste" has the
shortcut that was originally assigned to
"primary-selection-paste paragraph".
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16553 a592a061-630c-0410-9148-cb99ea01b6c8
the status quo fixes, I'll send a proposal how to proceed soon.
* src/CutAndPaste.[Ch]
(copySelection): Split into copySelection and copySelectionToStack
* src/text3.C
(LyXText::dispatch): Use copySelectionToStack instead of LFUN_COPY
to copy the selection to the cut buffer for two reasons:
- LFUN_COPY did not work (probably because bv.cursor() was not yet set)
- If it would work it would put the selection to the system clipboard
which is clearly wrong.
Document why we put the selection to the stack.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16534 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C
(InsetTabular::doDispatch): Only paste the tabular clipboard if the
system clipboard is not newer, else let the current cell paste the
system clipboard
(InsetTabular::getStatus): Only decide whether to enable LFUN_PASTE
if the tabular clipboard is not empty and the system clipboard is
not newer, else let the current cell decide.
* src/mathed/InsetMathGrid.C
(InsetMathGrid::doDispatch): Use the system clipboard for LFUN_PASTE
if it is newer.
* src/mathed/InsetMathNest.C
(InsetMathNest::doDispatch): Use the system clipboard for LFUN_PASTE
if it is newer.
* src/text3.C
(doInsertInset): Add a "0" argument to LFUN_PASTE, because we always
want to use the internal clipboard here
(LyXText::dispatch): ditto (when handling mouse button 2 press)
(LyXText::dispatch): Use the system clipboard for LFUN_PASTE if it
is newer.
(LyXText::getStatus): Also enable LFUN_PASTE if the system clipboard
is owned by another application
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16498 a592a061-630c-0410-9148-cb99ea01b6c8
The use of top-level lyx::dispatch() ensure that the CoordCache is OK at each step.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16348 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXText::cursorPrevious(): Implement the same check for safety reason.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16092 a592a061-630c-0410-9148-cb99ea01b6c8
* text2.C
- LyXText::cursorUp(): ensure that BufferView::FitCursor() is tested.
- LyXText::cursorDown(): ditto
- LyXText::cursorRight(): ditto
- LyXText::cursorLeft(): ditto
* text3.C
- LyXText::dispatch(): add FIXME and ensure that update flag is at least equal to FitCursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16072 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer.h: changed() signal do not have an argument now.
* BufferView.C:
- setBuffer(): changed update() call to updateMetrics().
- update(): sanitize how the flags are used.
- scrollDocView(): add a call to updateMetrics() at the end.
* LyXFunc::dispatch(): adjust changed() signal emission.
* LyXText/text3.C:
- cursorPrevious(): delete BufferView::update call; adjust cursor flag.
- cursorNext(): ditto.
* frontends/LyXView.C: adjust Buffer::changed() signal connection.
* frontends/WorkArea.[Ch]:
- redraw(): no need to re-update the metrics if we don't change views.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15997 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView:
- update(): returns a pair of bools in order to inform for singlePar cases.
- workAreaDispatch(): ditto and simplify the logic by using cursor update flags.
* text.C
- breakParagraph(): change the cursor update flag as needed.
- insertChar(): ditto.
- erase(): ditto
- redoParagraph(): now returns true if there is a height change.
* text3.C: dispatch():
- initialize the cursor flag at the beginning
- LFUN_MOUSE_PRESS: no need to update.
- LFUN_MOUSE_RELEASE: ditto.
- add some FIXMEs and comments.
* LyXFunc::dispatch(): simplify the BufferView update.
* insets/insetcollapsable.C: clarify and simplify the logic in doDispatch().
* WorkArea::dispatch(): redraw only if needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15958 a592a061-630c-0410-9148-cb99ea01b6c8
labelstring_appendix in layout files
* src/text2.C
(LyXText::setLayout): Translate labelwidthstring for paragraph
(LyXText::getStringToIndex): labelwidthstring is now a docstring
* src/buffer.[Ch]
(Buffer::translateLabel): New method for translating a label if it
is not already translated by the user in the layout file
* src/lyxtext.h
(setParagraph): labelwidthstring is now a docstring
* src/support/lstrings.[Ch]
(bool isAscii): New utility function: Determine whether a docstring
contains only pure ascii
* src/text3.C
(LyXText::dispatch): setParagraph() now takes a docstring
* src/lyxlayout.C
(LyXLayout::read): Don't use from_ascii when reading labelstring_,
endlabelstring_ and labelstring_appendix_
* src/buffer_funcs.C
(setLabel): labelwidthstring is now a docstring
(setLabel): Use Buffer::translateLabel instead of Buffer::B_ to
translate labels
(expandLabel): ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15855 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXText
- bv(), bv_owner, : deleted.
- These methods now need a (Buffer const &) argument: getFont(), applyOuterFont(), getLayoutFont(), getLabelFont(), setCharFont(), setLayout(), singleWidth(), leftMargin(), rightMargin(), computeRowMetrics(), isMainText(), spacing(), isRTL(), cursorX(), rowBreakPoint(), setRowWidth(), labelFill(), labelEnd().
- These methods now need a (BufferView const &) argument and are propably candidates for future removal when 1.6 is opened for development: redoParagraph(), x2pos(), getRowNearY(), getColumnNearX(), checkInsetHit(), setHeightOfRow().
- recUndo(): now need a LCursor argument.
* CoordCache::get(LyXText const *, pit_type):
- now const.
- use const_iterator instead of iterator.
* FontIterator:
- add (Buffer const &) argument to ctor
- buffer_: new const reference to applicable BufferView.
* InsetBase
- xo(), yo(), covers() and neverIndent() are now const.
* InsetText::setViewCache(): deleted
All other changes are due to the LyXText and InsetBase API changes.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15618 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insetcommandparams.[Ch]:
(operator[]): New, access a parameter
(clear): New, clear all parameters
(info_): New, stire info about this command
(cmdname): Rename to name_
(contents, options, sec_options): Replace with params_. Parameters
are now stored as docstring.
(findInfo): New factor for command info for all commands
(read, write): Use new syntax
(parameter set and get methods): reimplemenmt for new parameter storage
* src/insets/insetcommand.h
(getParam): New, get a parameter
(setParam): New, set a parameter
(parameter set and get methods): Adjust to InsetCommandParams changes
* src/insets/insetbibitem.[Ch]
(write): Remove, not needed anymore
(directWrite): ditto
* src/insets/insetbibitem.C
(InsetBibitem::read): Use InsetCommand::read
* src/insets/insetref.C
(InsetRef::latex): Use new InsetCommandParams interface
* src/mathed/InsetMathHull.C
(InsetMathHull::doDispatch): ditto
* src/text3.C
(LyXText::dispatch): ditto
* src/factory.C
(createInset): Create InsetCommandParams with command name
(readInset): ditto
(readInset): Remove error message for bibitem, since bibitem is
now a normal command inset
* src/buffer.C: Bump file format number
* src/frontends/controllers/ControlCommand.[Ch]
(ControlCommand): take an additional command name parameter
* src/text.C
(readParToken): Remove code for \bibitem
* lib/lyx2lyx/LyX.py: Bump latest file format number
* lib/lyx2lyx/lyx_1_5.py
(convert_bibitem, convert_commandparams): new, convert to new format
(revert_commandparams): new, convert to old format
* development/FORMAT: document new format
* many other files: Adjust to the changes above
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15357 a592a061-630c-0410-9148-cb99ea01b6c8
* lyxfunc.h:
- theLyXFunc(): new function in the global namespace.
- lyx::dispatch(): new function in the lyx namespace.
- lyx::getStatus(): new function in the lyx namespace.
* bufferlist.h:
- theBufferList(): new function in the global namespace.
* Clipboard.h:
- theClipboard(): new function in the global namespace.
* Selection.h:
- theSelection(): new function in the global namespace.
* FontLoader.h:
- theFontLoader(): new function in the global namespace.
* FontMetrics.h:
- theFontMetrics(LyXFont const &): new function in the global namespace.
* Application.C: implements the functions defined above.
* LyXView.h:
- getLyXFunc(): deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15298 a592a061-630c-0410-9148-cb99ea01b6c8
* rename output_changes to outputChanges
* rename tracking_changes to trackChanges
* add FIXMEs for later revision
* remove trackChanges(); the CT data structure will always be set up
* decouple LFUNs changes-output/change-accept/change-reject/
all-changes-accept/all-changes-reject from LFUN changes-track
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15261 a592a061-630c-0410-9148-cb99ea01b6c8
* lib/ui/stdmenus.ui: move math text styles from
menu "insert" to menu "edit"
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15246 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView
- layoutChanged: new boost signal.
- LyXView owner(), owner_: deleted
* text3.C
- emit BufferView::layoutChanged instead of calling LyXView::setLayout directly
- LFUN_MOUSE_RELEASE: delete LyXView updateMenubar() and updateToolbars() direct calls.
The update is of both bars is done in WorkArea::dispatch().
* WorkArea.C
- dispatch(): add LyXView updateMenubar() call.
* LyXView
- connects to BufferView::layoutChanged directly to Toolbars::setLayout()
- setLayout(): deleted.
* qt4/GuiImplementation: modify BufferView construction (without LyXView).
All other files: cleanup header declaration of LyXView.h
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15153 a592a061-630c-0410-9148-cb99ea01b6c8
The associated WorkArea is then responsible to connect these signals to its LyXView parent.
* BufferView:
- showDialog, showDialogWithData, showInsetDialog: new boost signals
* LyXView:
- connectBufferView(), disconnectBufferView(): new method in charge of the connection/disconnection of the above signal to associate private methods (showDialog(), etc).
* WorkArea
- setBufferView(): will connect/disconnect the BufferView to its LyXView parent.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@15068 a592a061-630c-0410-9148-cb99ea01b6c8
* src/insets/insettabular.C (getStatus):
* src/insets/insettext.C (doDispatch,getStatus): remove special code
for LFUN_INSET_DISSOLVE.
* src/text.C (dissolveInset): new method.
(erase, backspace): use dissolveInset.
* src/text3.C (dispatch): use dissolveInset for LFUN_INSET_DISSOLVE.
(getStatus): disable LFUN_INSET_DISSOLVE if the inset has more than one cell.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@14940 a592a061-630c-0410-9148-cb99ea01b6c8
