The computation of length on screen depend in particular of the computation of the size of an em. Many places of the code used to rely on the width of the M character, which is not really correct:
http://en.wikipedia.org/wiki/Em_%28typography%29
In digital typography, the best value to use is the point size of the font.
* Implement FontMetrics::em(), which returns the value in pixels of the EM unit.
Convert code to use it.
* Introduce Length::inPixel(MetricsBase const &), which takes the textwidth and em information from the MetricsBase object. Convert code to use it.
* Fix several places where Length::inPixel is used without a proper em value.
* add mathed_font_em() helper function. It should eventually be removed like some other functions in MathSupport.
* Add dummy implementation of FontMetrics to tex2lyx for linking purposes.
This is the rersult of a discussion on the list. Now all special characters
have meaningful names, and it is clear that the LyX file syntax is not LaTeX.
tex2lyx did not use the InsetLayout for the script insets, so it did not know
that it had to use Plain Layout. However, there is still a possible pitfall:
InsetScript uses a hard coded plain layout for the InsetText constructor, so
if anybody would remove ForcePlain 1 and MultiPar false from the InsetLayout
then LyX would still write script insets with plain layout, but tex2lyx would
output standard layout again.
Previously, LyX did replace some words with typeset logos, and there was no
way to prvent this except putting them, in ERT (bug #4752). Now we have
special insets for these words, and standard text is left alone.
Previously, tex2lyx did not remove the \protect which is output by LyX in
front of \nobreakdash- if needed. Now tex2lyx removes it unconditionally (like
it does elsewhere), because LyX will add it if needed.
Previously, consecutive dashes in .lyx files were combined to endash and emdash
in some cases, and in other cases they were output as is. This made the code
complicated, and resulted in inconsitencies ((bug #3647).
Now, a dash in a .lyx file is always a dash in the output, for all flavours.
The special handling is moved to the input side, so that you still get an
endash if you type two hyphens. If needed, this can be changed or made
customizable without the need to update the file format again. Many thanks
for the fruitful mailing list dicsussion, which contributed significantly to
the final version.
The textcyr test did not work anymore, since the output of
"CYRILLIC SMALL LETTER VE" changed from \textcyr{\char226} to \textcyr{\cyrv}.
The the old version is now converted to ERT. In theory it could also be
converted to "CYRILLIC SMALL LETTER VE", but this would mean to maintain an
extra list, which is not worth the effort.
This is needed since src/support calls lots of qt code, and some parts of it
(e.g. QFileInfo) require a running event loop. This fixes bug #4917 which is
a symptom of the problem.
The fix is to create a QCoreApplication for tex2lyx, lyxclient and LyX running
without GUI. In the future this could be extended, i.e. to split up the
frontend Application class in a GUI and a console class, and having the
console class use LyXConsoleApp in the same way as Application now uses
GuiApplication. If that is done, one could also think of moving
support/ConsoleApplication to frontend/console/ConsoleApplication.
This is the first part of bug #8553. \textgreek was interpreted as the
polyglossia version even if polyglossia was not used. Now it is not recognized
at all and converted to ERT, but this ensures at least correct LaTeX output.
Previously tex2lyx did ignore table columns if the column specifier was
unknown. This can lead to data loss, and now it does not ignore these columns,
but assumes that the column specifiers use only once character. This can still
lead to data loss, but less often.
If the user gave the -fixednec argument to tex2lyx then set that encoding as
LaTeX input encoding in the generated LyX file. Otherwise, included .bib files
could be interpreted using a wrong encoding.
Now we can handle all types of captions defined in layout files or modules.
This does also mean that \captionabove and \captionbelow are only recognized
in KOMA-classes and not always anymore, but this is correct, since these
captions would not work in other document classes anyway.
This fixes the tex2lyx test test-refstyle-theorems.tex. It seems that the
intent of the fix was to remove a \protect in front of a \caption,
\captionabove or \captionbelow, but the implementation did not really do that.
Furthermore, it is not clear in which cases a \protect in front of a caption
needs to removed, and in which cases it needs to be kept: After looking at the
LyX sources I could not see that caprions are always output with \protect.
These are now in version.cpp. The build machinery should therefore make sure
that version.cpp is recompiled at every compilation.
These variables are now referred to by the other places that made use of __DATE__ and __TIME__.
If we are testing tex2lyx the first time, then the userdir
is empty. We call now configure.py to initalize in case it is needed.
The algorithm to detect if reconfigure is needed mimics the lyx behaviour.
The option --enable-qt5 allows configuring for Qt5. The default is Qt4.
Nothing special is done with respect to Qt4, apart from pulling in the
correct libraries. Indeed, other than the core and gui libraries, now
also the concurrent and widgets libraries are needed.
This is a follow-up of bug #8967. The implementation is self-explaining, the
only part which needs a comment is lyx2lyx: Since a 100% correct solution is
not possible, it has been decided not to switch amsmath off in the forward
conversion if no other ams command than \smash[t] and \smash[b] is used, but
to consider it a bug that older versions do not load amsmath automatically for
these commands. In the backward direction it is easy to keep the document
compilable, so just do that.
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
In C++98 std::istream does not use an operator bool(), but an operator
void*() instead, which prevents some unwanted conversions (this is one
possible implementation of the safe bool idiom).
In C++11 std::istream uses explicit operator bool, which prevents the unwanted
conversions using a new language feature.
This change does not have any effect on correct code, but prevents some
mistakes.
* remove unused class TexStream.
* remove unused virtual method Inset::cellXOffset
* remove second argument of FileDialog constructor, which was actually
not used
* remove some dead local code
* remove some unused private members of classes
* in InsetMathNest::updateBuffer, fix the logic of a test
This patch improves the cmake bundling process:
- reworked bundle handling for OS X: only when installing resources are copied, otherwise
only the smallest bundle is built
- on OS X, the utility programs (tex2lyx) are now installed in the right location
- it removes some unneeded BUNDLE DESTINATION
- it provides a basic support for QT plugins inclusion
- it properly builds a disk image on OS X (only the background image is missing)
- it fixes the library paths for all executables (not only LyX)
- Use the COPYING file for cmake install license
writer2latex surrounds quotes by braces which we skip to avoid useless ERT.
I broke this in 25fe87e5 which made Parser::next_next_token() not recognize
that it needed to parse one more token. If we had a unit test for the Parser
class it would probably have detected that. Now we have at least a test for
the special quote.
If we call tex2lyx on a temporary file created from the clipboard, the
file is always in utf8 encoding, without any temporary changes, even if it
contains encoding changing LaTeX commands. Therefore, we must tell tex2lyx
to use a fixed utf8 encoding for the whole file, and this is done using the
new latexclipboard format. Previously, tex2lyx thought the encoding was
latin1.
As a side effect, the -e option is now also documented in the man page.
The tests are now more robust if ctest uses '-j' (number of threads) parameter.
a.) keytests are running in sequence and in one thread only, no other thread running
b.) tex2lyx tests are locking in respect to each other
c.) Test gets one or more labels, so that we can select
ctest -L url
to run tests labeled url
d.) New macro settestlabel() to add labels to a test
When comparing the contents of two lyx-files, we should not care about the specific version. Later, this can be extended to also not care whether the file is produced by tex2lyx, lyx2lyx, or LyX.
Modified-By: Vincent van Ravesteijn <vfr@lyx.org>
LyX, lyx2lyx and tex2lyx produce now all the same version indicator consisting
only of the major and minor version. It is not decided yet whether future
development versions will add a -dev suffix, but for 2.1.0 this change fixes
the inconsistencies.
