Now backspace and delete in text will select non-empty math and text insets
before deleting them. This is consistent with what happens in math already.
This is implemented for InsetText as well but can be disabled in case of
negative feedback.
This can be set for any sort of inset with the new virtual method
Inset::confirmDeletion.
New option "force" for the LFUN_*_DELETE_* commands, that bypasses the
confirmDeletion check.
The special mode used by macros where the macro name is displayed as
grey text in a box is now one of the possible marker types for any
inset. The new code puts the macro name below the text, which means
that only the text below the current line will be moved. This makes
edition much more comfortable.
The marker_type enum has been moved from Inset to InsetMath.
A new BOX_MARKER enum value has been added and is taken care of in
afterMetricsMarkers (renamed from metricsMarkerVertical) and
drawMarkers.
The InsetMath::marker() macro now takes a BufferView pointer as
argument, so that the marker type can depend on editing state.
MathRow::metrics now makes changes to the MathRow object when needed.
The specific metrics/draw code in MathMacro has been removed and
replaced by assertions. Code in addToMathRow and marker is adapted to
reflect the cases where linearization is possible.
From now on \kern and \mkern remain as ERT as long as the length is invalid.
Fixes#10539 (regression at 10c8d51b).
The only way to produce an InsetMathKern now is via parsing (i.e. file opening
or copy-paste). This is because there has never been any sensible way to input a
valid InsetMathKern, but this is another issue.
Since in InsetMathNest::cursorPos we do not know what is the value of
the row element before value of a given BOX, it does not make sense to
set the cursor at a given offset from the start of the MathData
object.
Therefore here we set the cursor in the middle of the MathData object,
which unfortunately may or may not be visually centered wrt the BOX.
The best solution would be to use the MathRow data here, but
unfortunately this is not completely trivial.
This patch replaces 7917ebcc4.
Horizontal space is now added for linearized macros too.
Vertical space handling is done in a separate method.
This is in preparation for handling of 'box' macro editing mode in
MathRow.
The current version was wrong for non-English dialogs, and even for
the English one, due to the translator commands that were not removed
for calculation (as in "Formats[[output]]").
Candidate for stable.
This adds support for the chapterbib package, but also adds ways to
produce this sort of multibib with biblatex and bibtopic (which are
both incompatible with chapterbib).
File format change.
InsetMathDelim does not need markers because the delimiters are
visually enough.
CommandInset (like InsetMathRef) does have cells, but they are hidden
(only for storage). Therefore the default InsetMath::markers() method
mistakenly added markers. In practice, the markers were never active
(since the cursor cannot go into the inset), but some space was
reserved for them.
This allows to somewhat simplify the text and avoid some uses of
Paragraph (in the long term, RowPainter should not have to access
these things).
At the same time do a small cleanup to RowPainter: rename
text_metrics_ to tm_, remove pm_ and width_.
The enum values BEG_MACRO/END_MACRO and BEG_AR/END_AR are replaced by a
single BEGIN/END pair.
The MathRow code now only knows about insets and math arrays.
New hooks (before|after)(Metrics|Draw) are run by the MathRow code
as needed. They are actually also used internally by the MathMacro
code.
The gain is that most traces of explicit macro handling (and
the MathRow::Element::macro member) have been removed from MathRw.cpp.
The next step will be to extend the tokenizing process to allow for
linearizing insets other than macros.
* Convert the kerning into a proper right margin for mathnormal, mathscr and
mathcal (fonts with \fontdimen2 == 0 as per rule 17 from TeXBook).
* Simulate the fact that characters in mathnormal fonts have a 0-width left
bearing.
* Implement subscript positioning in the case of rule 17 using negative italic
correction (kerning_).
File format change.
This allows for the relevant InsetCommand-based dialogs (such as
citation text before/after, Bibitem label, hyperlink name etc.)
to provide both the input of verbatim code or text that is transformed
to proper LaTeX code.
Some dialogs (Nomencl, Href) already had some methods (although they
could not be toggled), which are now centralized and streamlined.
The initial work of this patch has been done by Georg Baum (see
http://www.lyx.org/trac/attachment/ticket/2751/x.diff)
Fixes: #2751, #8227.
When using Qt stuff in breakAt, it may happen that the row is broken
after an hyphen (whereas the old code would only consider spaces).
The fact that we abuse the Row::right_boundary() property to detect when
a row should be flushed broke justification when a row is cut at an
hyphen.
Fix this by introducing a new Row::flushed() property and set it as needed.
The code that tries to decide whether it is worth splitting a given
text row element had a shortcoming: it did not take into account the
left margin of the new row that would be created.
The problem is that this left margin is not the same as the left
margin of the current row, because there can be for example
indentation effects.
To fix this problem, we pass the amount of available space on the
next row as a parameter of Row::shortenIfNeeded.
Note that there is no need to care about RtL row elements at this
point, since the bidi algorithm will be applied to the row
subsequently.
This avoids some duplicate code. Note that the return value of
Paragraph::getAlign had to be changed. I suspect it was set to char to
avoid reading one header file in Paragraph.h.
Whenever an argument delimiter is used inside the argument, the argument
needs to be grouped, that is
\cites({text (text) text})
or
\cite[{text [text] text}]
This fixes the original case reported in #2751 which is independent
from the general issue that the pre- and postnote field take literal
code.
Starting with Qt 5.6, setting the environment variable QT_SCALE_FACTOR
makes everything accordingly bigger. So, if QT_SCALE_FACTOR=1.2, all
text and GUI elements are rendered 20% bigger. However, if an application
does not account for this, everything will also look "blocky".
With this commit, all text and images will be scaled remaining sharp.
This works whether a HiDpi screen is used or not, but is mostly useful
with a HiDpi screen, as all GUI elements are more spaced apart and one
can use the mouse for selecting things without requiring a high precision.
These are biblatex-specific multicite commands that allow for multiple
pre- and postnotes, as in:
\cites(pre)(post)[pre1][post1]{key1}[pre2][post2]{key2}...
with an optional general pre- and postnote, which applies to the whole
list (like [][] in normal cite commands) and an optional pre- and
postnotes for each item, so that pagination can actually be specified in
multi-cite references, as in:
(cf. Miller 2015, 2; furthermore Smith 2013, 23-23; Jenkins 2012, 103,
also refer to chapter 6 in this book)
See the biblatex manual, sec. 3.8.3., for details.
File format change.
It seems that QTextLayout does not handle properly a single character
with 0 width. This breaks drawing of things like \not.
Actually the problem had been worked around already in lib/symbol. The
work around can therefore by removed now.
[additionally, remove extra spacing from \mapsto, \Mapsto]
Add a pixel gap around boxes.
When a box is invisible, its width should be null (but keep the weight
to avoid drawing problems (think empty sqrt in a macro).
Fixes missing outliner names in various situations. Now if the warning "Missing
outliner name" appears in the console, this correctly hints at an actual issue
with the layout.
Biblatex can be used with Japanese, but then, biber (not pbibtex) should
be used as processor.
I this context, bring the jbibtex UI in line with bibtex, allowing for
a selection of alternatives.
This is now set as default. It selects biber for Biblatex (with
fall-back to first bibtex8, then bibtex, if the former is not
installed), and bibtex for BibTeX-based engines.
With this, users do not normally need to care for the processor when
they switch cite engines.
The goal of this patch is to be able to properly remove the space
needed for markers in the case of insets that are inside macros and do
not need these markers. This was attempted at 9a9a6a8, but did not
work reliably.
To this end, the following simplifications are made:
* instead of drawing its own markers, each inset has a virtual method
marker() which prescribes either NO_MARKER, MARKER (normal bottom
marker) or MARKER2 (top and bottom marker). All explicit calls to
(draw|metrics)Markers(|2) are removed.
* the space necessary for the markers is now counted in the
before/above margins in the row structure. Therefore painting will
not happen at (x + 1, y), but just (x,y).
* the methods drawDecoration are removed.
* the helper methods InsetMath::(draw|metrics)Markers(|2) are removed
and replaced by a new function drawMarkers in MathRow.cpp.
Now the marker type is kept in the MathRow::Element object (and set to
NO_MARKER in not editable context) and the marker is accounted for in
MathRow::(metrics|draw).
Moreover, the extra pixel for the marker is taken on the before/After
space if possible. The marker will only require extra space when
before/after is 0.
See comment 168 of #8883 to understand what issues are fixed.
The rewrite of macro_nesting done at 0f15dcc6 was faulty, in
particular since the information should be available also at draw
time. To this end, we revert the patch of the said commit that removes
macro nesting information from MathRow::Element. In the next commit,
we will change the marker code so that MathRow::draw does not need the
nesting information.
Actually the code is now cleaner since the macro nesting stack of
MathRow::metrics can be removed.
