It seems we realized the font in the wrong order. If the layout font specifies "Font Size Small", we should be able to make it large if we want to.
see:
http://thread.gmane.org/gmane.editors.lyx.devel/122682
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32129 a592a061-630c-0410-9148-cb99ea01b6c8
If the first character is a separator, we are in RTL text. This character will not be painted on screen and thus we should not count it and skip to the next.
This bug pretty much destroyed cursor placement in RTL text on a row with large gaps.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32116 a592a061-630c-0410-9148-cb99ea01b6c8
Math manual loads and save correctly it seems but expect some instability period.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31898 a592a061-630c-0410-9148-cb99ea01b6c8
If we correct the row where we put the cursor after a PgDn or PgUp command, then we should also adjust the y-coordinate that is used later for checkInsetHit and inset->editXY.
However, this code doesn't function like it should, but that is bug #4382.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31007 a592a061-630c-0410-9148-cb99ea01b6c8
TextMetrics::drawParagraph(): really check the whole row and not only the first word.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30971 a592a061-630c-0410-9148-cb99ea01b6c8
Now inline SpellChecker is faster than ever. Now, I honestly think that we blow out all the competitors (thunderbird, OO, MSWord, etc) :-)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30970 a592a061-630c-0410-9148-cb99ea01b6c8
In the computation of the row width, the last space on a row was included. However, this space is not drawn on screen and shouldn't contribute to the width. As a result all rows in a paragraph were painted slightly too far to the left, except the last on.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30967 a592a061-630c-0410-9148-cb99ea01b6c8
The row in editXY is corrected when we're scrolling with PgUp and PgDwn to make sure that the row where the cursor is places, is completely in the view.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29752 a592a061-630c-0410-9148-cb99ea01b6c8
http://www.lyx.org/trac/ticket/4067
If we are in the first pos, we are never in the body and always in the label.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29033 a592a061-630c-0410-9148-cb99ea01b6c8
This is in preparation of some changes to be made in this function, now the change will only have to be done once...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27656 a592a061-630c-0410-9148-cb99ea01b6c8
1. When a listing is inserted in a bit of text, the line above the listing is not drawn over the full width like it is done for lines above other insets. This is because InsetListing has a AlignLeft alignment. Now, if you start selecting downwards with the mouse in this empty area, strange selection drawings appear (see attachment).
This is caused by the fact that starting your selection at such a place, causes beg.boundary() to be true in TextMetrics::drawRowSelection(..). This is correct, but this value is true for _all_ selected lines. Now, the selection acts as if it is RTL text. Therefore, just like for end.boundary, this value needs to be reset for every line.
2. Starting your selection in an end margin often causes the selection in this end margin to be painted later. This is because when starting your selection in an end margin, you may have set a (possible empty) selection before really selecting the end margin. The problem is that the checksum (computed later) is the same for this empty selection and for the end margin selection. Therfore, we need a call to cur.setSelection() before evaluating cur.selection().
3. In the following two lines, it is assumed that there is only an end margin to be painted if the selection extends to the next paragraph. This is not true for the above described case of an AlignLeft Inset. Then, the margin has also be drawn within a paragraph
4. The end and begin margins are only painted when the selection extends into the following or previous paragraph. This difference is not resembled in the checksum if you first select a row completely and then procede to the next or previous paragraph as the selection remains at the end of a row. This also holds for the AlignLeft case. Therefore I added a term to the checksum to monitor whether the end and begin margins need to be drawn.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26399 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Inset.h:
- new member content Alignment that indicates whether the content
of text insets should be displayed with a specific alignment
* src/TextMetrics.cpp:
- handle inset's contentAlignment
* src/insets/InsetTabular.{cpp,h}:
- set contentAlignment for tabular cells.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26380 a592a061-630c-0410-9148-cb99ea01b6c8
there is still one issue which is related (or so i think) to the pit is not being updated when extending a selection to a new row with cursor right/left. i left a FIXME in the code
i put this in since it is a uniform improvement on the current situation...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24089 a592a061-630c-0410-9148-cb99ea01b6c8
The need for a LayoutPtr arises from the fact that (a) we do not want to give our clients a Layout &, since we do not want them to be able to change our Layout; but (b) we also need to be able to change which layout is ours. So we cannot store a Layout const &. Or so it seems to the compiler.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23522 a592a061-630c-0410-9148-cb99ea01b6c8
Sorry, Andre, but this broke not only the modules stuff but the general handling of TextClasses. I'm not opposed to doing this sort of thing, but it's going to be a little more complicated. I'll do it when I get a bit of time, or I can explain what the issue is here if you want to do it.
I'll separately re-commit some of the cleanup here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23189 a592a061-630c-0410-9148-cb99ea01b6c8
Also a few cosmetical changes where I xould not resist.
Would be nice if the 'modules people' could verify that their baby
is strill alive...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23154 a592a061-630c-0410-9148-cb99ea01b6c8
* completion support for mathed
* experimental completion support for text
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23104 a592a061-630c-0410-9148-cb99ea01b6c8
from the one posted to the list.
The basic idea has two parts. First, we hard code an "empty layout"
(called PlainLayout, for want of a better name) in TextClass and read it
before doing anything else. It can therefore be customized by classes,
if they want---say, to make it left-aligned. Second, InsetText's are
divided into three types: (i) normal ones, that use the "default" layout
defined by the text class; (ii) highly restrictive ones, such as ERT and
(not quite an inset) table cells, which demand the empty layout; (iii)
middling ones, which default to an empty layout and use the empty layout
in place of the default. (This is so we don't get the same problem we
had with ERT in e.g. footnotes.) The type of inset is signaled by new
methods InsetText::forceEmptyLayout() and InsetText::useEmptyLayout().
(The latter might better be called: useEmptyLayoutInsteadOfDefault(),
but that's silly.) The old InsetText::forceDefaultParagraphs() has been
split into these, plus a new method InsetText::allowParagraphCustomization().
A lot of the changes just adapt to this change.
The other big change is in GuiToolbar: We want to show LyXDefault and
the "default" layout only when they're active.
There are a handful of places where I'm not entirely sure whether we
should be using forceEmptyLayout or !allowParagraphCustomization() or
both. The InsetCaption is one of these. These places, and some others,
are marked with FIXMEs, so I'd appreciate it if people would search
through the patch and let me know whether these need changing. If they
don't, the FIXMEs can be deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22966 a592a061-630c-0410-9148-cb99ea01b6c8
paragraph relayout happens (e.g. when inserting a InsetBranch, the
InsetText inside was not processed by any updateLabels call), and
hence the macrocontext is not always set. This should not happen often
in fact. So we update the labels in that case explicitely when we see
an empty macrocontext.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22807 a592a061-630c-0410-9148-cb99ea01b6c8
avoidable ~5% overhead when loading the UserGuide. This is an attempt on
rectifying the situation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22532 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
* ParagraphMetrics::computeRowSignature(): Integrate row's dimensions and selection status in the row signature.
* TextMetrics::drawParagraph(): compute the row signature here and rely on that to decide if a redraw is needed or not.
* BufferView::Private: get rid of the ViewMetricsInfo member. Just keep the ScreenUpdateStrategy.
* BufferView::draw(): full screen update even for singlePar case because the row signature will detect if something needs to be redrawn.
* Text3.cpp: get rid of hack following architecture update.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21650 a592a061-630c-0410-9148-cb99ea01b6c8
* Painter.h: move isDrawingEnabled() to public Area.
* TextMetrics::drawParagraph(): backup and restore original drawing state of the Painter.
* InsetTabular::draw(): ditto.
* InsetMathNest::drawSelection(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21471 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
This is the first patch in a series meant to remove LTR bias from the code.
Currently, there are many places in the code where "right" and "left" are used,
but where we actually mean "forward" and "backwards" --- which is the same
thing in LTR text, but not in RTL/Bidi text.
See full details in http://permalink.gmane.org/gmane.editors.lyx.devel/97550.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21128 a592a061-630c-0410-9148-cb99ea01b6c8
- Move Changes.h out of Paragraph.h
- pimpl the inset list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21033 a592a061-630c-0410-9148-cb99ea01b6c8
In the future, when Cursor has been fixed to work correctly with multiple views of the same Buffer, we could transfer the Undo owner from Buffer to Cursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21031 a592a061-630c-0410-9148-cb99ea01b6c8
(maily move layout related enums into a header of there own to remov
include dependencies, alos rename a few things)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20598 a592a061-630c-0410-9148-cb99ea01b6c8
- get rid of the cached Dimension. Text inset dimensions are saved in ParagraphMetrics and mathed maintain their own dimension where needed.
- width(), ascent(), descent(): deleted.
- dimension(): now needs a valid BufferView.
- metrics(): now void.
* BufferView::getCoveringInset(): simplify.
* ParagraphMetrics(): now cache inset dimensions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20420 a592a061-630c-0410-9148-cb99ea01b6c8
- first() and last(): change return type because std::pair of reference didn't work (i.e. bug)
* BufferView::workAreaDispatch(): re-enable and fix 'mouse hover' feature.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20372 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView:
- new scroll(), scrollDown() and scrollUp() method for pixel scrolling.
- new LFUN_SCREEN_UP/DOWN handling.
* TextMetrics: new helper and access methods.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20283 a592a061-630c-0410-9148-cb99ea01b6c8
* ParagraphMetrics::position_: new private member (and associated access method).
* TextMetrics:
- origin_: new screen position cache.
- use origin_ and ParagraphMetrics::position() instead of the parPos cache.
* Cursor:
- comment out buggy bruteFind() method, will work on that later.
* BufferView::updateMetrics(): refactor and simplify to use new cache and to gather everything SinglePar related.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20214 a592a061-630c-0410-9148-cb99ea01b6c8
* Row:
- setSelection(): set selection begin and end for this row.
- sel_beg, sel_end: new public members.
* BufferView::draw()
- do not trigger a full repaint for selection.
- use TextMetrics::draw() instead of hand calling TextMetrics::drawParagraph().
* InsetText::draw(): don't call TextMetrics::drawSelection().
* InsetMathMBox::drawSelection(): remove.
* TextMetrics:
- drawSelection(): simplify a bit. Now private.
- redoParagraph(): memorize Row selection status.
- x2pos(): fix crash when selecting with PageDown.
- draw(): fill-in the ParPos cache before everything else and not in drawParagraph().
- drawParagraph(): take care of row selection painting.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20066 a592a061-630c-0410-9148-cb99ea01b6c8
- getFont() becomes TextMetrics::getDisplayFont()
- setCharFont() now needs a display font.
- setInsetFont() and setFont() now needs a BufferView, will be transferred to TextMetrics too.
- isRTL(): moved to TextMetrics
- isRTLBoundary(): ditto
- font_: ditto
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20014 a592a061-630c-0410-9148-cb99ea01b6c8
* TextMetrics::drawParagraph(): force full repaint on Insets that are within the current repainting row.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19968 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView::draw(): makes use of PainterInfo::full_repaint
* TextMetrics::drawParagraph(): ditto.
* InsetText::drawSelection(): don't fillRectangle() if there's no selection.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19918 a592a061-630c-0410-9148-cb99ea01b6c8
- paintOnlyInsets(): new public method for inset painting only in case the inset dimension didn't change within a Row.
- paintInset(): put out everything not strictly related to the inset painting itself.
- paintHfill(): new private method to cut the reduce code in paintText().
* TextMetrics::drawParagraph(): use paintOnlyInsets() when the Row text nor it's dimension changed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19912 a592a061-630c-0410-9148-cb99ea01b6c8
* TextMetrics::redoParagraph(): crop the RowList if it is too big.
* ParagraphMetrics::reset(): don't clear its RowList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19897 a592a061-630c-0410-9148-cb99ea01b6c8
^ Row:
- changed_: new boolean to inform change status at draw time.
- crc_: new crc_ signature
- inline pos() and endpos()
- replace width(), ascent() and descent() direct access with dimension().
* ParagraphMetrics
- do not maintain row_signature_ anymore
- rename calculateRowSignature() to computeRowSignature() and make it public
* TextMetrics
- redoParagraph(): don't clear the ParagraphMetrics row list, reuse and update it.
- rowHeight(), rowWidth(), rowBreakPoint(): take first/end positions instead of Row.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19895 a592a061-630c-0410-9148-cb99ea01b6c8
- move RowPainter class out of the anonymous namespace so that it can be used by TextMetrics::drawParagraph().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19848 a592a061-630c-0410-9148-cb99ea01b6c8
* Inset::dimension(): access to dim_
* TextMetrics::redoParagraph(): don't trust Inset::metrics() returned boolean as the internal dimension is changed down in the inheritance chain for InsetFoot->InsetCollapsable->InsetText.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19838 a592a061-630c-0410-9148-cb99ea01b6c8
- leftMargin, rightMargin, labelsep, labelindent, parindent are now docstring.
* TextClass.h:
- leftMargin() and rightMargin(): now return a docstring.
All other files: adapt to change above.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19633 a592a061-630c-0410-9148-cb99ea01b6c8
hence we have to set it manually.
(bug #3787: Huge fonts do not set the row height)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18731 a592a061-630c-0410-9148-cb99ea01b6c8
places now where a ParagraphMetrics::computeRowMetrics call comes
before. And this function the Bidi object is updated. So it is a
little step now to remove the Text::bidi completely and use local
Bidi objects instead without more work to do.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18706 a592a061-630c-0410-9148-cb99ea01b6c8
end (but start and end inside of the buffer limits) for the last
empty row behind a newline.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18576 a592a061-630c-0410-9148-cb99ea01b6c8
which now returns 1 if an InsetBibitem was inserted (and the cursor needs
to be incremented) or -POS if an InsetBibitem was deleted at position POS
(and the cursor needs to be decremented if it was past POS). Otherwise, it
returns 0. Made the corresponding changes in TextMetrics.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18424 a592a061-630c-0410-9148-cb99ea01b6c8
- do not insert blank line for listings content.
* src/TextMetrics.cpp (setHeightOfRow):
- don't use parkip in Listings insets (bug 3624)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18399 a592a061-630c-0410-9148-cb99ea01b6c8
