Much of the point of this is to allow us properly to handle what LyX does as:
<em>This is <strong>bold and italic</em> and now just bold.</strong>
We output:
<em>This is <strong>bold and italic</strong></em><strong> and now just bold.</strong>
which is valid.
Note how much easier this would have been if emphasis and boldness were insets
rather than ranges. ;-)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32086 a592a061-630c-0410-9148-cb99ea01b6c8
accepting changes in a clipboard copy (CutAndPaste.cpp), we set the buffer
of insets (and we reset them later).
Doing this makes sense because we know this is the only operation on these
out-of-document paragraphs that will require access to a buffer.
Also, this commit gets rid of one explicit test against ERT_CODE and
LISTING_CODE.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30623 a592a061-630c-0410-9148-cb99ea01b6c8
Basically, insets in cut stack do not have a buffer, and therefore cannot
acess to buffer parameters. What is annoying here is that acceptChanges
requires this buffer params only to be able to read a font in moveItem,
in order to read the buffer language, and I doubt this is really needed...
Another change in this patch is that Inset::getLayout now returns a
plainLayout when the inset does not have a buffer_. This fixes a remaining
crash where dEPM reads isFreeSpacing() for an inset in the clipboard, but
this looks like a fragile situation. And it will not do the right thing when
doing depm in a freespacing inset.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30605 a592a061-630c-0410-9148-cb99ea01b6c8
routines, one that allows us to "defer" certain material, e.g., a float
that ought to appear in a div but can't simply be put into the middle
of a paragraph.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30079 a592a061-630c-0410-9148-cb99ea01b6c8
Do not accept the changes in the selection, if it is completely deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29672 a592a061-630c-0410-9148-cb99ea01b6c8
- constify some parameters
- getFontSettings():
- getFirstFontSettings(): return a const ref instead of a copy. This brings a consistent 4% improvement in LateX generation. Might speedup rtl handling too.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26957 a592a061-630c-0410-9148-cb99ea01b6c8
* Paragraph::insertInset(): check if inset insertion is allowed before insertion.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26810 a592a061-630c-0410-9148-cb99ea01b6c8
Changes::addToToc(): New method to insert changes sorted by authors. The symbols 0x2702 and 0x270d are used to represent deletion and insertion.
TocBackend::item(): new method to lookup for a given item.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26639 a592a061-630c-0410-9148-cb99ea01b6c8
* development/MacOSX/lyxrc.dist.in: new variable mac_like_word_movement,
set to true on Mac OS X. There is no GUI for it now.
* src/Paragraph.cpp (isSpace): new method
(isChar): return false for a space.
* src/Text.cpp (cursorForwardOneWord, cursorBackWardOneWord): implement
mac-like cursor movement.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25413 a592a061-630c-0410-9148-cb99ea01b6c8
* Paragraph.cpp (isChar): new method; returns true when pointer is on
a character that is not a letter. Note that a footnote inset, for
example is neither a letter nor a character.
* Text.cpp (cursorForwardOneWord, cursorBackwardOneWord): rewrite by
using 3 character categories: letters, characters and others.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25373 a592a061-630c-0410-9148-cb99ea01b6c8
The need for a LayoutPtr arises from the fact that (a) we do not want to give our clients a Layout &, since we do not want them to be able to change our Layout; but (b) we also need to be able to change which layout is ours. So we cannot store a Layout const &. Or so it seems to the compiler.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23522 a592a061-630c-0410-9148-cb99ea01b6c8
dependent, we need the buffer pointer. In fact we already have a
pointer to the text inset. So as soon as inset know their buffer we
can easily switch to a buffer local word list.
* there might be missing some more places to update the words from a
buffer, like for example after backspace or more important when the
cursor leaves a paragraph.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23244 a592a061-630c-0410-9148-cb99ea01b6c8
from the one posted to the list.
The basic idea has two parts. First, we hard code an "empty layout"
(called PlainLayout, for want of a better name) in TextClass and read it
before doing anything else. It can therefore be customized by classes,
if they want---say, to make it left-aligned. Second, InsetText's are
divided into three types: (i) normal ones, that use the "default" layout
defined by the text class; (ii) highly restrictive ones, such as ERT and
(not quite an inset) table cells, which demand the empty layout; (iii)
middling ones, which default to an empty layout and use the empty layout
in place of the default. (This is so we don't get the same problem we
had with ERT in e.g. footnotes.) The type of inset is signaled by new
methods InsetText::forceEmptyLayout() and InsetText::useEmptyLayout().
(The latter might better be called: useEmptyLayoutInsteadOfDefault(),
but that's silly.) The old InsetText::forceDefaultParagraphs() has been
split into these, plus a new method InsetText::allowParagraphCustomization().
A lot of the changes just adapt to this change.
The other big change is in GuiToolbar: We want to show LyXDefault and
the "default" layout only when they're active.
There are a handful of places where I'm not entirely sure whether we
should be using forceEmptyLayout or !allowParagraphCustomization() or
both. The InsetCaption is one of these. These places, and some others,
are marked with FIXMEs, so I'd appreciate it if people would search
through the patch and let me know whether these need changing. If they
don't, the FIXMEs can be deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22966 a592a061-630c-0410-9148-cb99ea01b6c8
already set.
* src/Paragraph.cpp (changeCase): make sure to update the selection
as needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22695 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
hope there are only conforming implementaions out there ;-}
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21312 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
- remove META_INSET from Paragraph.h
- move text_ container to Private. I know this put there for performance reason but I don't see any penalty with this move. I guess this is because Buffer loading doesn't use Paragraph::getChar() anymore. I will move performance critical code to Paragraph::Private when/if we detect them.
- replace Paragraph::value_type with straight char_type: this was more noise than anything.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21163 a592a061-630c-0410-9148-cb99ea01b6c8
- simpleTeXOnePar(): renamed to latex(), beginning of de-spaghettization by truly splitting inset and character cases.
- appendChar(), appendString(): new method for buffer reading.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21117 a592a061-630c-0410-9148-cb99ea01b6c8
- Move Changes.h out of Paragraph.h
- pimpl the inset list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21033 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Changes.cpp:
* src/support/userinfo.cpp:
* src/Paragraph.cpp:
* src/Changes.h:
* src/Buffer.cpp:
* src/Paragraph.h:
* src/BufferParams.cpp: do not save the name of authors
in LyX documents, who have not made a single change in
change tracking mode
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19019 a592a061-630c-0410-9148-cb99ea01b6c8
which now returns 1 if an InsetBibitem was inserted (and the cursor needs
to be incremented) or -POS if an InsetBibitem was deleted at position POS
(and the cursor needs to be decremented if it was past POS). Otherwise, it
returns 0. Made the corresponding changes in TextMetrics.cpp.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18424 a592a061-630c-0410-9148-cb99ea01b6c8
