so we can write a limited amount when using this for TOC and
tooltip output.
This should solve the problem with slowness that Kornel noticed,
which was caused by our trying to write an entire plaintext
bibliography every time we updated the TOC. We did that because
he had a bibliography inside a branch, and we use plaintext for
creating the tooltip that goes with the branch list.
Other related bugs were fixed along the way. E.g., it turns out
that, if someone had an InsetInclude inside a branch, then we would
have been writing a *plaintext file* for that inset every time we
updated the TOC. I wonder if some of the other reports of slowness
we have received might be due to this kind of issue?
Reordering citations is one case where catching "Citation undefined
on page ..." doesn't catch the need for a bibtex rerun. This patch
ensures the proper ordering is obtained in pdf output without having
to resort to closing and reopening the LyX document.
Add a new layout syntax CiteEngine to define the citation commands
available for a given citation engine.
Also extend the CiteFormat syntax to allow more customization. This
mechanism, previously used to produce bibliography entries in the
citation GUI based on the BibTeX entrytype, is now also used to
produce the textual labels for citation insets in the buffer view.
Thus citation styles are almost completely customizable by modules.
Modules for the basic, jurabib and natbib engines are implemented.
Layout format incremented to 37.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40820 a592a061-630c-0410-9148-cb99ea01b6c8
inset to know that the BibTeX data had changed. So we introduce a
Buffer-wide variable that we can query for that information.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38619 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
- Functions that inherit from the same baseclass are grouped together with a command;
- Functions that inherit should not have a doxy entry;
- Other functions are also grouped together as much as possible;
- Some function don't need to be implemented if they return the same as the baseclass;
- and more.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35873 a592a061-630c-0410-9148-cb99ea01b6c8
as to allow us to call the routine when we are preparing for output and
so to do certain things we might not want to do every time.
This is an abuse of updateLabels(), in a way, but updateLabels() long
ago became the general recurse-through-the-Buffer routine, and to
implement the sort of thing I want to do here in validate(), say, much
of the code in updateLabels()---in particular, the counter-update
code---would have to be duplicated. So I believe this is the best, and
easiest, way to go.
Actual use of the new argument will follow.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32318 a592a061-630c-0410-9148-cb99ea01b6c8
routines, one that allows us to "defer" certain material, e.g., a float
that ought to appear in a div but can't simply be put into the middle
of a paragraph.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30079 a592a061-630c-0410-9148-cb99ea01b6c8
* Remove the EDITABLE enum,
* add functions hasSettings() for all insets.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29375 a592a061-630c-0410-9148-cb99ea01b6c8
please check your favourite insets, I am sure I broke _something_...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24006 a592a061-630c-0410-9148-cb99ea01b6c8
This patch reworks the machinery that holds information about what parameters there are and what their values are. There's enough flexibility here that true keyval support ought to be fairly easy at this point. I'll have a peek at that shortly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23168 a592a061-630c-0410-9148-cb99ea01b6c8
(i) The file format is changed, so that command insets are represented as:
\begin_inset CommandInset insetype
LatexCommand command
...
\end_inset
This involves some lyx2lyx and changes to the readInset() routine in factory.cpp
(ii) The InsetCommand and InsetCommandParams classes also have to be changed, as the command name was used in these classes for various purposes for which the inset type ought really to be used.
Further clean-up to come.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20544 a592a061-630c-0410-9148-cb99ea01b6c8
