The included iconv should not be used on Linux or OS X, but (depending on
local configuration) it might be needed for crosscompiling a mingw target
from Linux. Now the user can choose whether to use the included iconv or not.
cmake does already support that.
eilseq.m4 was taken from the original libiconv 1.14 package.
See bug 10053 for details. Without this, the package is only set correctly
for 32bit mingw.
Thanks Enrico for suggesting this fix and Shankar Giri Venkita Giri for
testing it.
The included zlib should not be used on Linux or OS X, but (depending on
local configuration) it might be needed for crosscompiling a mingw target
from Linux. Now the user can choose whether to use the included zlib or not.
cmake does already support that.
zconf.h.in was taken from the original zlib 1.2.8 package. The generation of
zconf.h was made equivalent to the one generated by cmake.
Since at least gcc 4.6 requires it, -std=c++11 has been passed to CPPFLAGS at 39717adfd. This was deemed necessary so that tests that use the preprocessor directly (AC_CHECK_HEADER) can have the right information.
It turns out that CPPFLAGS gets passed to objc compilation too (on Mac OS X) and this create compile-time errors.
Therefore we remove the -std flag from CPPFLAGS and re-add it to a separate variable cxx11_flags that is passed to LYX_CXX_USE_REGEX.
This amends commit e1938aa2, which introduced some logic
errors: regex would be enabled for gcc versions which have unusable
<regex> header.
The new code separates better special gcc handling from special C++11
handling and should be more readable.
* set -std=c++11 in AM_CPPFLAGS instead of AM_CXXFLAGS, since the
preprocessor uses this setting too.
* Before checking for header <regex>, set language to C++ and update
value of AM_CPPFLAGS too.
* Separate code that checks for regex in its own macro.
* now unknown compiler which have the <regex> header, will use std::regex in C++11 mode.
-Wno-deprecated-declarations is needed to avoid warnings about auto_ptr being obsolete.
The old code meant that the warnings would be suppressed for development builds, but active for release builds. The new code avoids that.
Only enable std::regex when the header <regex> is present (fix Mac OS X issue).
Remove support for concept checks. The page
https://gcc.gnu.org/onlinedocs/libstdc++/manual/concept_checking.html
says about concept checking:
Please note that the checks are based on the requirements in the
original C++ standard, many of which were relaxed in the C++11
standard and so valid C++11 code may be incorrectly rejected by the
concept checks. Additionally, some correct C++03 code might be
rejected by the concept checks, for example template argument types
may need to be complete when used in a template definition, rather
than at the point of instantiation. There are no plans to address
these shortcomings.
Therefore it seems reasonable to remove our support for this.
In general this would lead to an immediate runtime crash because the
runtime checks of libstdc++ change the layout of some STL objects.
Therefore, this will only work when the boost libraries have been
compiled with this same flag. At this time, it is not known whether
any linux distribution contains such libraries.
Fixes bug #9736.
When using -std=c++11, the cygwin compiler automatically defines
__STRICT_ANSI__ which is used as a guard for not declaring essential
unix standard calls such as setenv, popen, etc. As a result,
compilation stops with errors such as "xxxx has not been declared".
By undefining the guard, compilation succeeds and lyx works Ok.
Compiler that are known to support C++11 (gcc >= 4.3 and clang) are
now used in this mode by default. It is still possible to override
this choice using --(en|dis)able-cxx11.
Moreover, c++11 mode is detected from the compiler itself, not from
the use of --enable-cxx11. This allows to support compilers other
than gcc or clang.
Update INSTALL file accordingly and clean it a little bit.
This replaces commit 329eae56 with a better solution. Indeed, while
__cpluplus is useless with g++ 4.[3-6] because its value is always 1,
these compilers define __GXX_EXPERIMENTAL_CXX0X__ when "-std c++0x" is used.
Therefore the code now relies on both macros to detect C++11 mode
instead of setting it when --enable-cxx11 is used.
Also, use pure c++ mode instead of gnu++ extensions on gcc
This replaces tests for __cplusplus >= 201103L, which are wrong with gcc 4.6 and earlier. Indeed these versions of gcc define __cplusplus = 1.
Reference:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=1773
We claim that gcc 4.x is needed in INSTALL, so it does not make sense to keep
this old stuff. Instead, I made configure output an error if gcc is too old.
The GNU libstdc++ that ships witch gcc 5 can be used with the same ABI as
older versions, or with a new ABI which is conformant to the C++11 standard.
LyX did not build if the latter was used:
https://kojipkgs.fedoraproject.org//work/tasks/1267/9651267/build.log
This is now fixed by detecting the ABI version and disabling the wrong forward
declarations. At the same time, STD_STRING_USES_COW is switched off for the
C++11 ABI version, because the std::basic_string implementation is now C++11
conformant. Since the GNU libstdc++ can also used by other compilers such as
clang, we must not test for the compiler version.
Some distros may use target-specific prefix for ar program (like
x86_64-pc-linux-gnu-ar). Automake can handle that since version 1.12.
Since we still support automake 1.8 (not that it is really crucial,
but ubuntu 12.04 ships with automake 1.11.3), make the code
conditional.
Update a bit the gitignore files (automake creates some files in config/).
Based on a patch from Nikolay Orlyuk <virkony@gmail.com>.
A new macro adapted from AM_PROG_PYTHON is defined. It does the dual version testing for python 2 and python 3. The rest of the functionnality of AM_PROG_PYTHON has been stripped off.
Once our special macro has been invoked, we use the usual AM_PROG_PYTHON.
Now CXXFLAGS is left alone by autoconf: only the user can override it.
Properly set -g and -O options, which were overriden.
Try to put the arguments in a more reasonable ordering.
Get rid of some old useless compiler checking code
Do not touch CXXFLAGS and friends, only the AM_* version
Let the gcc-related options for latest known version be the default (assume they will still be fine in future versions)
Try to take clang in account in a better way (to be continued):
* use proper option for C++11,
* use -Wno-deprecated-register in this case because Qt has a lot of these
* define version as being clang for internal testing (there is no real way to get the clang version)
This fixes the -geometry command line option and restores the
"Use icons from system's theme" checkbox in the preferences.
There is still code addressing Qt4 and xlib that has to be
audited. This code cannot be compiled with Qt5 because the
default backend is now xcb and not xlib. I have marked such
code with a "FIXME QT5" comment.
The old detection did only work if CFLAGS contained -std=c++11, since ciso646
was only included for __cplusplus > 199711.
Thanks to Koernel for the cmake part.
The interface is now 100% unit tested, and the typedefs depend on the new
STD_STRING_USES_COW configuration variable. The only missing bit is to detect
clang and disable STD_STRING_USES_COW for clang.
The option --enable-qt5 allows configuring for Qt5. The default is Qt4.
Nothing special is done with respect to Qt4, apart from pulling in the
correct libraries. Indeed, other than the core and gui libraries, now
also the concurrent and widgets libraries are needed.
When --with-qt-dir has been specified, programs like "moc" in the Qt
directory are unlikely to have a qualified name like moc-qt4.
Therefore, such qualified names are only considered when the base
version has not been found.
Note that some mentions of svn remain in
* development/cmake/LyxPackaging.cmake
* development/LyX-Mac-binary-release.sh
* development/Win32/packaging/installer/settings.nsh
* build-type=profiling implies -fno-omit-frame-pointer in gcc. This allows sysprof to yield proper call trees
* remove --enable-grpof option (the build type is enough)
* remove --with-frontend option since we have only one frontend. Move stuff around and generally simplify the Qt detection code
* do not check for bc anymore.
* Update README.
* some functionality is in new modules now
new header locations and library names: QtConcurrent and QtWidgets
* method setResizeMode is renamed to setSectionResizeMode
* deprecated QAbstractItemModel::reset() is dropped now
* platform specific code like QApplication::syncX() is not common anymore
* QString::fromAscii() is dropped now
* some QDesktopServices methods has been moved to QStandardPaths
Just some comments on the patch:
- The executable name has to match the information in Info.plist (development/MacOSX/Info.plist.in and CMakeLists.txt). The autoconf config/lyxinclude.m4 file has been modified to make it work with autotools.
- The process to build OS X bundle is to first add all the files to be included to the bundle when calling add_executable (src/CMakeLists.txt) and then by calling setting the source file property of each of these files (development/cmake/Install.cmake, l.14) so that the files are properly located into the bundle. This is also why Install.cmake has to be included two times in src/CMakeLists.txt (once to build the list of files, once to set the location of the list of files).
- in CMakeLists.txt there is a line
install(CODE "set(BU_CHMOD_BUNDLE_ITEMS 1)")
What it does is to fix the owner permissions within the bundle - this is necessary because some libraries are copied within the bundle and might be owned by root
- An empty qt.conf is included in the bundle so that QT does not try to link to other QT libraries (which will not be included in the bundle)
- In development/cmake/Install.cmake, some OS X specific files (*.sdef, qt.conf, *.icns) have to be included in the bundle
Benjamin
Setting up .gitignore or .git/info/excludes is something that should
be done. Not doing it makes it a lot harder to see actual new files
that should be added.
Signed-off-by: Lars Gullik Bjønnes <larsbj@gullik.org>
* add proper INSTALL_POSIX conditional for makefiles
* move all the code to Makefile.am
* rename lyx.desktop to lyx.desptop.in and add proper tags to allow handling of program_suffix.
* add code to install desktop entry and icons under the proper name.
I did not touch scons and cmake, I hope it was not necessary.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40531 a592a061-630c-0410-9148-cb99ea01b6c8
(hunspell 1.3 is not correctly recognized otherwise).
Patch from Rex Dieter, posted by Jose.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39040 a592a061-630c-0410-9148-cb99ea01b6c8
Only for autotools, I don't know how to update cmake and scons, sorry.
For cmake and scons, you should make sure that moc is called on Server.h
using the -D_WIN32 option.
In order to enable the server, specify the LyXServer pipe in
Tools->Preferences->Paths. The path to be entered there must have the
form "\\.\pipe\nameofyourchoice" (without quotes). After that, you can
send commands to LyX. For example, if the pipe path is \\.\pipe\lyxpipe,
typing the following in a terminal:
echo LYXCMD:test:file-open > \\.\pipe\lyxpipe.in
type \\.\pipe\lyxpipe.out
brings up the file dialog and returns the acknowledgment from LyX.
Beware of spaces when using cmd.exe. For example, the following:
echo LYXCMD:test:file-open:foo.lyx> \\.\pipe\lyxpipe.in
will correctly load the document named foo.lyx, but
echo LYXCMD:test:file-open:foo.lyx > \\.\pipe\lyxpipe.in
(notice the space before the redirection) will try to load a
document whose name is "foo.lyx .lyx" because cmd.exe will also
pass the space (sigh).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31189 a592a061-630c-0410-9148-cb99ea01b6c8
using --with-version-suffix (without value), config.status will be
written wrongly and try to run
./configure--with-qt4-lib= [...]
This is because the code that adds automatically the version number eats
the leading space.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27151 a592a061-630c-0410-9148-cb99ea01b6c8
* config/*: update files to libtool 1.5.26 (latest 1.x version)
* configure.ac: use AC_USE_SYSTEM_EXTENSIONS instead of AC_AIX and
friends (available since 2.59c, which is now required); work around
a bug with gettext.m4 and autoconf 2.62.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26117 a592a061-630c-0410-9148-cb99ea01b6c8
* autogen.sh: use autopoint to poulate the gettext code; simplify.
* po/Rules-lyx: move the LyX-specific code of the Makefile here.
* configure.ac: add magic incantation telling autopoint to import
gettext 0.16.1. Generate config.h in toplevel directory to please
gettext.
* src/tex2lyx/Makefile.am:
* src/client/Messages.cpp: compile fix
* remove all files that came from a gettext distribution.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25167 a592a061-630c-0410-9148-cb99ea01b6c8
--enable-build-type=(rel*,pre*,dev*) that allows to override the
automatic setting of optimization, debugging and others.
* INSTALL: document new option and remove a lot of cruft.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22945 a592a061-630c-0410-9148-cb99ea01b6c8
* src/support/tempname.cpp: move code about HAVE_MKSTEMP here (only user)
* src/pch.h:
* src/Buffer.cpp:
* configure.ac: remove all traces of utime.h and HAVE_UTIME
* config/lyxinclude.m4: remove WITH_WARNING define (which be rendered useless in
a future commit from christian)
* development/scons/SConstruct: try to update.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19395 a592a061-630c-0410-9148-cb99ea01b6c8
* development/MacOSX/lyxrc.dist.in: use it here instead of program_suffix
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19392 a592a061-630c-0410-9148-cb99ea01b6c8
* m4/*:
* intl/*:
* ABOUT-NLS:
* po/Makefile.in.in:
* po/POTFILES.in:
* po/Makevars.template:
* config/mkinstalldirs:
* config/config.rpath: update from gettext 0.14.6 source. This enables
translation to system language on Mac OS X
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19347 a592a061-630c-0410-9148-cb99ea01b6c8
put LIBICONV in LIBS.
* src/Makefile.am:
* src/client/Makefile.am: update accordingly.
* config/qt4.m4: do not try to run pkg-config tests when pkg-config
is not installed.
* INSTALL.MacOSX: advise to use pkg-config; remove -lz from LDFLAGS;
remove --with-frontend=qt4 from configure line; in the svn case, remove
also --disable-stdlib-debug and --disable-concept-checks (and explain
why --disable-stdlib-debug may be needed).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19056 a592a061-630c-0410-9148-cb99ea01b6c8
INSTALL_MACOSX when packaging is macosx.
* development/Makefile.am: only install MacOSX when needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@17988 a592a061-630c-0410-9148-cb99ea01b6c8
* src/buffer.C
(Buffer::readString): Tell readFile that we do not have a file
(Buffer::readString): readFile(name) returns a bool, not an enum
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16931 a592a061-630c-0410-9148-cb99ea01b6c8
- pkgconfig is missing
- pkgconfig is available, but it does not have any qt information
by Jean-Marc and me
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16271 a592a061-630c-0410-9148-cb99ea01b6c8
from/to the local 8bit encoding with it.
Only the autotools build system is updated, scons and cmake users need to
add qt4 cpp flags when compiling libsupport, and link libsupport against
libQtCore.
* src/frontends/qt4/qt_helpers.[Ch]
(toqstr, qchar_to_ucs4, ucs4_to_qchar, ucs4_to_qstring,
qstring_to_ucs4, fromqstr): Move these qstring conversion functions
from here ...
* src/support/qstring_helpers.[Ch] ... to these new files
* src/support/docstring.[Ch]
(from_local8bit): new conversion function from local 8bit encoding
to ucs4
(to_local8bit): new conversion function from ucs4 to local 8bit
encoding to ucs4
(to_local8bit_failure): exception that is thrown by to_local8bit if
the argument cannot be converted to the local encoding
* src/support/filename.C
(FileName::toFilesystemEncoding): implement with the help of QFile
* src/support/Makefile.am: Add new files, qt4 cpp flags and link
against libQtCore
* src/client/client.C: Convert commandline input from local encoding
to ucs4. Convert stuff that is sent to to the server to utf8,
because LyX interprets it as utf8 on the other end of the pipe.
* src/lyx_main.C
(LyX::exec): convert commandline input from local encoding to utf8
(LyX::init): ditto
(LyX::easyParse): ditto
* development/scons/scons_manifest.py: Add new files
* config/qt4.m4: Define new variables QT4_CORE_INCLUDES,
QT4_CORE_LDFLAGS and QT4_CORE_LIB
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@16257 a592a061-630c-0410-9148-cb99ea01b6c8
