assure to switch to math mode if needed. This helps avoiding latex
errors (see http://thread.gmane.org/gmane.editors.lyx.general/69580)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38579 a592a061-630c-0410-9148-cb99ea01b6c8
as an image.
The math macro now exports as XHTML + MathML and can be viewed in
Firefox.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38190 a592a061-630c-0410-9148-cb99ea01b6c8
preparatory to fixing #7080. Note that mathed uses the same routine, but
for a completely different purpose, so I did not rename it there. I have
seen no difference in behavior after testing, e.g., opening and
exporting Math.lyx, and also re-saving it and looking at the diff.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@38109 a592a061-630c-0410-9148-cb99ea01b6c8
Two things have been fixed here:
1) the selection should not be cleared when the user right clicks a math inset that is part of the selection,
2) the type of context menu should be determined at mouse-press, because that is the moment when the cursor is set. However, we should do it after setting the cursor, because setting the cursor might change the selection status and this influences the choice for the type of context menu.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37961 a592a061-630c-0410-9148-cb99ea01b6c8
Currently, if an inset outputs a newline, the new latex row is still
associated with a previous id/pos. Now, if a latex error occurs before
this newline, we would still highlight everything associated to that
id/pos, even if it is extraneous to the error.
This is avoided by associating the new latex row with the id/pos in
effect right before entering the inset. If an inset does not output
a newline, it is not excluded from the selection, consistent with the
fact that the text of the inset does appear in the error description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37903 a592a061-630c-0410-9148-cb99ea01b6c8
resetFontEdit(). The former is used for on-screen and export formatting,
and the latter is used for interactive editing.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37761 a592a061-630c-0410-9148-cb99ea01b6c8
counting when exporting to latex. This is done for the code comprised
between \begin{document} and \end{document}, while the preamble code
still needs manual calls to TexRow::newline() for registering new lines.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37584 a592a061-630c-0410-9148-cb99ea01b6c8
blank lines may be inadvertently output. This is achieved by using two
special iomanip-like variables (breakln and safebreakln) in the lyx::
namespace. When they are inserted in the stream, a newline is output
only if not already at the beginning of a line. The difference between
breakln and safebreakln is that, if needed, the former outputs '\n'
and the latter "%\n".
In future, the new class will also be used for counting the number of
newlines issued. Even if the infractrure for doing that is already in
place, the counting is essentially still done the old way.
There are still places in the code where the functionality of the
class could be used, most probably. ATM, it is used for InsetTabular,
InsetListings, InsetFloat, and InsetText.
The Comment and GreyedOut insets required a special treatment and a
new InsetLayout parameter (Display) has been introduced. The default
for Display is "true", meaning that the corresponding latex
environment is of "display" type, i.e., it stands on its own, whereas
"false" means that the contents appear inline with the text. The
latter is the case for both Comment and GreyedOut insets.
Mostly, the only visible effects on latex exports should be the
disappearing of some redundant % chars and the appearing/disappearing
of null {} latex groups after a comment or lyxgreyedout environments
(they are related to the presence or absence of a space immediately
after those environments), as well as the fact that math environments
are now started on their own lines.
As a last thing, only the latex code between \begin{document} and
\end{document} goes through the new class, the preamble being directly
output through odocstream, as usual.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37360 a592a061-630c-0410-9148-cb99ea01b6c8
of things like:
pit.push_back(CursorSlice(*this));
which I've had to change to:
pit.push_back(CursorSlice(const_cast<InsetCaption &>(*this)));
and similarly in a few other places.
If anyone thinks we should instead have:
explicit CursorSlice(Inset const &);
then we can also do that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37192 a592a061-630c-0410-9148-cb99ea01b6c8
then output \setcounter macros during snippet generation, so that we get
the right equation values.
Note: It would be possible to use this same machinery to fix bugs in
instant preview, e.g., that you always get things like (0.3) as equation
numbers, if you use equations numbered by section. I'll perhaps post a
patch for that.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37186 a592a061-630c-0410-9148-cb99ea01b6c8
still be a mess in many cases, but hopefully we won't have to go here
very often.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37181 a592a061-630c-0410-9148-cb99ea01b6c8
numbering in XHTML output, but it's just as easy to fix this in the LyX
display.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@37177 a592a061-630c-0410-9148-cb99ea01b6c8
that also makes sure it doesn't do more work than it needs to do, by
limiting the size to 40 characters. Previously, InsetBranch::addToToc()
would have added a string representing the entire contents of the
branch! It's hard to imagine that having to recalculate that sort of
thing doesn't cause some problems with speed, especially in documents
with lots of notes and branches and such.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36974 a592a061-630c-0410-9148-cb99ea01b6c8
Using updateMacros() entails a performance hit when loading a document
with really a lot of macros. So, revert to the original strategy of
tracking macros at creation time. In order to also account for macros
defined in a child document, the child is now loaded by the include inset
at construction time instead of after the master has finished loading.
This strategy mimics what updateMacros() was accomplishing without
incurring in its drawbacks, such that loading time is practically
unchanged even with a thousand macros.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36968 a592a061-630c-0410-9148-cb99ea01b6c8
cause to miss some regeneration. So, better too much than less.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36872 a592a061-630c-0410-9148-cb99ea01b6c8
menus were (intentionally) missing, and it turns out they were needed.
Normally all invocations of INSET_MODIFY should trigger a recordUndo now.
Of course all cases have not been tested, but it should be working.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36770 a592a061-630c-0410-9148-cb99ea01b6c8
THis is a consequence of the new AtPoint mechanism. In the old
world, recordUndoInset was called before INSET_MODIFY. I reintroduced
manual recordUndoInset calls in all places that matter. I suspect
that this issue should be revisited later.
Note that recordUndoInset can now take an optional parameter that tells
what inset is concerned. This is useful because the cursor can be
either just inside the inset or in front of it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36580 a592a061-630c-0410-9148-cb99ea01b6c8
inset-insert simply swallows the selection, while box-insert, note-insert etc.
put the selection inside the new inset.
As a side effect the toolbar icons get better names, as requested by Uwe.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36451 a592a061-630c-0410-9148-cb99ea01b6c8
A dynamic_cast is necessary when:
- the object to be casted is from an external library because we can't add Qxxx::asXxxx() to Qt e.g.:
* QAbstractListModel to GuiIdListModel,
* QValidator to PathValidator,
* QWidget to TabWorkArea,
* QWidget to GuiWorkArea;
- the object is to be casted from an interface to the implementing class, because the Interface does not know by whom it is implemented:
* ProgressInterface to GuiProgress,
* Application to GuiApplication.
A dynamic_cast can be replaced by:
- already existing as***Inset() functions, e.g.:
* asHullInset(),
* asInsetMath()->asMacro(),
* asInsetText();
- a static_cast when we are sure this can't go wrong, e.g.:
* we are sure that CellData::inset->clone() is an InsetTableCell,
* in cases where we explicitly check it->lyxCode().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35855 a592a061-630c-0410-9148-cb99ea01b6c8
The old-style font changing macros really inherit the mode, so we have
to account for this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35156 a592a061-630c-0410-9148-cb99ea01b6c8
something we don't know how to handle and fall back to images.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35024 a592a061-630c-0410-9148-cb99ea01b6c8
I'll try to figure out how to get rid of the magic booleans.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35022 a592a061-630c-0410-9148-cb99ea01b6c8
The previous attempt messed up the inheritance hierarchy somehow. I
think.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35002 a592a061-630c-0410-9148-cb99ea01b6c8
allow this as a fallback. E.g., if we're unable to export as MathML,
then we try to export as an image.
There are several ways, I am sure, in which this implementation is not
ideal.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34993 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
empty line of substack, tabular and xymatrix, but not calling delEmptyLastRow
for them.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34763 a592a061-630c-0410-9148-cb99ea01b6c8
deleted not only for "array" but also for all inner-hull grid types.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34752 a592a061-630c-0410-9148-cb99ea01b6c8
This patch essentially reverts r30795 and also provides the correct fix
for #2969.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34751 a592a061-630c-0410-9148-cb99ea01b6c8
equivalent to \langle and \rangle, which were already taken into account.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34607 a592a061-630c-0410-9148-cb99ea01b6c8
They differ from their cousins only for the space left around them.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34604 a592a061-630c-0410-9148-cb99ea01b6c8
This is also in preparation of a decent fix for bug #3900.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34347 a592a061-630c-0410-9148-cb99ea01b6c8
