The row in editXY is corrected when we're scrolling with PgUp and PgDwn to make sure that the row where the cursor is places, is completely in the view.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29752 a592a061-630c-0410-9148-cb99ea01b6c8
http://www.lyx.org/trac/ticket/4067
If we are in the first pos, we are never in the body and always in the label.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29033 a592a061-630c-0410-9148-cb99ea01b6c8
This is in preparation of some changes to be made in this function, now the change will only have to be done once...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27656 a592a061-630c-0410-9148-cb99ea01b6c8
1. When a listing is inserted in a bit of text, the line above the listing is not drawn over the full width like it is done for lines above other insets. This is because InsetListing has a AlignLeft alignment. Now, if you start selecting downwards with the mouse in this empty area, strange selection drawings appear (see attachment).
This is caused by the fact that starting your selection at such a place, causes beg.boundary() to be true in TextMetrics::drawRowSelection(..). This is correct, but this value is true for _all_ selected lines. Now, the selection acts as if it is RTL text. Therefore, just like for end.boundary, this value needs to be reset for every line.
2. Starting your selection in an end margin often causes the selection in this end margin to be painted later. This is because when starting your selection in an end margin, you may have set a (possible empty) selection before really selecting the end margin. The problem is that the checksum (computed later) is the same for this empty selection and for the end margin selection. Therfore, we need a call to cur.setSelection() before evaluating cur.selection().
3. In the following two lines, it is assumed that there is only an end margin to be painted if the selection extends to the next paragraph. This is not true for the above described case of an AlignLeft Inset. Then, the margin has also be drawn within a paragraph
4. The end and begin margins are only painted when the selection extends into the following or previous paragraph. This difference is not resembled in the checksum if you first select a row completely and then procede to the next or previous paragraph as the selection remains at the end of a row. This also holds for the AlignLeft case. Therefore I added a term to the checksum to monitor whether the end and begin margins need to be drawn.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26399 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Inset.h:
- new member content Alignment that indicates whether the content
of text insets should be displayed with a specific alignment
* src/TextMetrics.cpp:
- handle inset's contentAlignment
* src/insets/InsetTabular.{cpp,h}:
- set contentAlignment for tabular cells.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26380 a592a061-630c-0410-9148-cb99ea01b6c8
there is still one issue which is related (or so i think) to the pit is not being updated when extending a selection to a new row with cursor right/left. i left a FIXME in the code
i put this in since it is a uniform improvement on the current situation...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24089 a592a061-630c-0410-9148-cb99ea01b6c8
The need for a LayoutPtr arises from the fact that (a) we do not want to give our clients a Layout &, since we do not want them to be able to change our Layout; but (b) we also need to be able to change which layout is ours. So we cannot store a Layout const &. Or so it seems to the compiler.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23522 a592a061-630c-0410-9148-cb99ea01b6c8
Sorry, Andre, but this broke not only the modules stuff but the general handling of TextClasses. I'm not opposed to doing this sort of thing, but it's going to be a little more complicated. I'll do it when I get a bit of time, or I can explain what the issue is here if you want to do it.
I'll separately re-commit some of the cleanup here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23189 a592a061-630c-0410-9148-cb99ea01b6c8
Also a few cosmetical changes where I xould not resist.
Would be nice if the 'modules people' could verify that their baby
is strill alive...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23154 a592a061-630c-0410-9148-cb99ea01b6c8
* completion support for mathed
* experimental completion support for text
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23104 a592a061-630c-0410-9148-cb99ea01b6c8
from the one posted to the list.
The basic idea has two parts. First, we hard code an "empty layout"
(called PlainLayout, for want of a better name) in TextClass and read it
before doing anything else. It can therefore be customized by classes,
if they want---say, to make it left-aligned. Second, InsetText's are
divided into three types: (i) normal ones, that use the "default" layout
defined by the text class; (ii) highly restrictive ones, such as ERT and
(not quite an inset) table cells, which demand the empty layout; (iii)
middling ones, which default to an empty layout and use the empty layout
in place of the default. (This is so we don't get the same problem we
had with ERT in e.g. footnotes.) The type of inset is signaled by new
methods InsetText::forceEmptyLayout() and InsetText::useEmptyLayout().
(The latter might better be called: useEmptyLayoutInsteadOfDefault(),
but that's silly.) The old InsetText::forceDefaultParagraphs() has been
split into these, plus a new method InsetText::allowParagraphCustomization().
A lot of the changes just adapt to this change.
The other big change is in GuiToolbar: We want to show LyXDefault and
the "default" layout only when they're active.
There are a handful of places where I'm not entirely sure whether we
should be using forceEmptyLayout or !allowParagraphCustomization() or
both. The InsetCaption is one of these. These places, and some others,
are marked with FIXMEs, so I'd appreciate it if people would search
through the patch and let me know whether these need changing. If they
don't, the FIXMEs can be deleted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22966 a592a061-630c-0410-9148-cb99ea01b6c8
paragraph relayout happens (e.g. when inserting a InsetBranch, the
InsetText inside was not processed by any updateLabels call), and
hence the macrocontext is not always set. This should not happen often
in fact. So we update the labels in that case explicitely when we see
an empty macrocontext.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22807 a592a061-630c-0410-9148-cb99ea01b6c8
avoidable ~5% overhead when loading the UserGuide. This is an attempt on
rectifying the situation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22532 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
* ParagraphMetrics::computeRowSignature(): Integrate row's dimensions and selection status in the row signature.
* TextMetrics::drawParagraph(): compute the row signature here and rely on that to decide if a redraw is needed or not.
* BufferView::Private: get rid of the ViewMetricsInfo member. Just keep the ScreenUpdateStrategy.
* BufferView::draw(): full screen update even for singlePar case because the row signature will detect if something needs to be redrawn.
* Text3.cpp: get rid of hack following architecture update.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21650 a592a061-630c-0410-9148-cb99ea01b6c8
* Painter.h: move isDrawingEnabled() to public Area.
* TextMetrics::drawParagraph(): backup and restore original drawing state of the Painter.
* InsetTabular::draw(): ditto.
* InsetMathNest::drawSelection(): ditto.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21471 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
This is the first patch in a series meant to remove LTR bias from the code.
Currently, there are many places in the code where "right" and "left" are used,
but where we actually mean "forward" and "backwards" --- which is the same
thing in LTR text, but not in RTL/Bidi text.
See full details in http://permalink.gmane.org/gmane.editors.lyx.devel/97550.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21128 a592a061-630c-0410-9148-cb99ea01b6c8
- Move Changes.h out of Paragraph.h
- pimpl the inset list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21033 a592a061-630c-0410-9148-cb99ea01b6c8
In the future, when Cursor has been fixed to work correctly with multiple views of the same Buffer, we could transfer the Undo owner from Buffer to Cursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21031 a592a061-630c-0410-9148-cb99ea01b6c8
(maily move layout related enums into a header of there own to remov
include dependencies, alos rename a few things)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20598 a592a061-630c-0410-9148-cb99ea01b6c8
