These are not actually implemented yet, but I wanted to make sure to get
them into the format now, so even if I can't implement them before the
1.7 release, I can do so during the release cycle, without a format
change. I don't expect that to happen, but you never know....
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32683 a592a061-630c-0410-9148-cb99ea01b6c8
The fileformat change is also needed because of our mistake that we load mhchem since LyX 1.6.4 automatically so that files created with LyX 1.6.4 won't compile under LyX 1.6.3. Now at least all files created or opened with LyX 1.7 can be reverted to the fileformat of LyX 1.6.x and can therefore be read by all LyX 1.6.x versions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31941 a592a061-630c-0410-9148-cb99ea01b6c8
This patch makes sure that there are minimal changes when loading and saving a file with change tracking.
- the authors are assigned a buffer_id, such that when the file is saved, they get the same id,
- the authorlist is sorted according to the buffer_id,
- the buffer_id is written to the file in the author list (file format change)
- the ids start with 1, because 0 is internally reserved for the current Author,
- when writing the file, the current author is assigned an id if he didn't already have it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30756 a592a061-630c-0410-9148-cb99ea01b6c8
available to tex2lyx. The point is to move the crucial routines that
deal with modules out of BufferParams.cpp, which tex2lyx does not have,
and into TextClass.cpp, which it does.
This is all cleanup that makes a lot of sense independently.
Note that LayoutModuleList will shortly become a real class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28456 a592a061-630c-0410-9148-cb99ea01b6c8
- pass graphics driver to geometry (bug 5613)
- put papersize options to package call, not in \geometry
which broke compilation in some cases (bug 3838)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27917 a592a061-630c-0410-9148-cb99ea01b6c8
and default modules. The lesson, in the end, is that we need to do all the
removal of modules that no longer `fit', for whatever reason, before we
do anything else. So the patch basically just moves the `removal' code
into a new routine that gets called before the routines that add default
modules and then check consistency.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27281 a592a061-630c-0410-9148-cb99ea01b6c8
isn't already added, that its requirements are satisfied, and that
it doesn't conflict with any loaded modules. Mostly, this just
moves existing code into a new routine where we can get at it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26995 a592a061-630c-0410-9148-cb99ea01b6c8
** fix bug 5343 (patch from Richard, prerequisite for the other fix)
* Buffer.cpp:
- increment format to 343
* src/BufferParams.{cpp,h}:
- new param \use_default_options that allows to select/deselect
the "Other" class options defined in the layout file.
* src/frontends/qt4/GuiDocument.cpp:
* src/frontends/qt4/ui/LaTeXUi.ui:
- add GUI to set \use_default_options, display predefined options in the dialog
- update dialog correctly on class change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26860 a592a061-630c-0410-9148-cb99ea01b6c8
file format change.
This is the last feature for today. Promised.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24540 a592a061-630c-0410-9148-cb99ea01b6c8
For the record, this developer is sorry that the problems with this code were not noticed much earlier. It's not fun to do so much work and then have it all reverted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24373 a592a061-630c-0410-9148-cb99ea01b6c8
* src/EmbeddedFiles.h|cpp: add validate() function to validate loaded .lyx file.
* src/LayoutFile.h|cpp: add Layout_Type parameter to addLayoutFile to load an embedded layout.
* src/BufferParams.h|cpp: read layout from temp directory, then local directory.
* src/frontends/qt4/GuiDocument.cpp: handle embedded layout type
* src/LyXFunc.cpp: handle embedded layout when a layout is re-read.
* src/Buffer.cpp: validate after a buffer is read. handle exceptions properly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23667 a592a061-630c-0410-9148-cb99ea01b6c8
LyX file format to 318. The Embedded files panel of document settings has
been simplied, with working add and remove buttons. Note that bease BufferParams
lacks buffer path information, extraEmbeddedFiles are vector<string>, instead
of EmbeddedFileList (as previously planned).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23606 a592a061-630c-0410-9148-cb99ea01b6c8
At this point, there are no simple TextClass objects in the main LyX code, and it is impossible to create them, since the TextClass constructor is protected. Only LayoutFile and DocumentClass objects can be constructed, and for the most part these are constructed only by their respective containers: BaseClassList and DocumentClassBundle. There is an exception: LayoutFile does have a public default constructor, but if anyone knows how to make it go away, please do.
There will be one or two more commits along these lines, but these will be simple renamings. For example, BaseClassList should be LayoutFileList.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23343 a592a061-630c-0410-9148-cb99ea01b6c8
Note that we no longer rely upon BaseClassList to be sorted. This would allow layout descriptions---such as "article (AMS)"---to be translated, and the ordering of the list in Document>Settings will then follow the translations.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23334 a592a061-630c-0410-9148-cb99ea01b6c8
Sorry, Andre, but this broke not only the modules stuff but the general handling of TextClasses. I'm not opposed to doing this sort of thing, but it's going to be a little more complicated. I'll do it when I get a bit of time, or I can explain what the issue is here if you want to do it.
I'll separately re-commit some of the cleanup here.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23189 a592a061-630c-0410-9148-cb99ea01b6c8
Also a few cosmetical changes where I xould not resist.
Would be nice if the 'modules people' could verify that their baby
is strill alive...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23154 a592a061-630c-0410-9148-cb99ea01b6c8
- (paperSizeName): add missing paper sizes. Add an argument to the function
that returns context-sensitive information (depending on the purpose)
- (paperSizeName): Do not hardcode "letter" for default paper size (bug 2098).
- (dvips_options): pass purpose DVIPS to paperSizeName
* src/Converter.cpp:
- (dvipdfm_options): pass purpose DVIPDFM to paperSizeName.
* src/Format.cpp:
- (view): pass purpose XDVI to paperSizeName (fix bug 4432).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22664 a592a061-630c-0410-9148-cb99ea01b6c8
- introduce changeExtension(): the goal is to replace progressively the one in filetools.cpp
- get rid of internal_path() checking for Win32 as the path is always normalized with slashes with QFileInfo.
* BufferParams: get rid of filepath member. This was used only once and was fixing a path in BufferParam was wrong anyway.
* Buffer::filePath(): always regenerate instead of caching it in BufferParams.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21847 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
That makes another simplification both possible and desirable. For some reason, whenever you change the Document Class combobox in Document Settings, LyX tries to read whatever you choose _before_ you try to hit "Apply". Why? I see no good reason. You get the warning earlier that way, but maybe you weren't going to try to load it anyway and were going to change your mind. So I have removed that behavior, in which case you'll get the warning when you try to apply the parameters. This means we can also remove ControlDocument::loadTextclass().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19965 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This patch adds the backend. The ModuleList class holds a list of the available modules, which are retrieved from lyxmodules.lst, itself generated by configure.py. There are two LFUNs available: modules-clear and module-add, which do the obvious thing; you can test by typing these into the minibuffer, along with the name of one of the available modules: URL (a CharStyle), Endnote (a Custom Inset), and---with the spaces---End To Foot (View>LaTeX and look at the user preamble), which are themselves in lib/layouts. There are some others, too, that allow theorems to be added to classes like article and book.
The GUI will come next.
Issues: (i) The configure.py script could be improved. It'd be nice, for example, if it tested for the presence of the LaTeX packages a particular module needs. But this would mean re-working the LaTeX script, and I don't know how to do that. Note that at present, the packages are ignored. This will change shortly. (ii) I've used std::string in LyXModule, following what seemed to be a precedent in TextClass. If some of these should be docstrings, please let me know, and I'll change them. (iii) There is at present no distinction between LaTeX and DocBook modules. Should there be? That is: Should there be modules that are available when the document class is a LaTeX class and others that are available only when it is DocBook? Or should there just be one set of modules? Each module can of course indicate for what it is suitable in its description.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19893 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This first patch does some reworking of the infrastructrue. We need to distinguish between the TextClass that a particular document is using and the layout of that document, since modules, in particular, can modify the layout. The solution adopted here is to add a TextClass pointer to BufferParams, which will hold the layout. The layout itself is then constructed from the TextClass the document is using. At present, this is completely trivial, but that will change when modules are added.
The pointer in question is a boost::shared_ptr. This is needed because CutAndPaste saves a copy of the layout with each cut or copied selection. We cannot assume the selection vanishes when the document is closed, so there are two options: (i) keep a list of all the layouts that have ever been used by any document; (ii) used some kind of smart pointer. The latter seems preferable, as the former would waste memory. More importantly, the use of a smart pointer allows modules to be modified on disk and then reloaded while LyX is running, and it will eventually allow the same for layout files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19756 a592a061-630c-0410-9148-cb99ea01b6c8
information is acquired. This involves (i) moving the bulk of fillWithBibKeys()
into Biblio.cpp, (ii) introducing a virtual method Inset::fillWithBibKeys() that,
by default, does nothing, and (iii) over-riding this method in the insets that do
need to do something.
This is all preparatory for a more substantial re-working of the BibTex code,
which should follow shortly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19565 a592a061-630c-0410-9148-cb99ea01b6c8
* src/graphics/PreviewLoader.cpp:
- make member writeEncodingPreamble void.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18543 a592a061-630c-0410-9148-cb99ea01b6c8
* src/BufferParams.{cpp,h} (writeLaTeX):
- move inputenc generation to an own function,
writeEncodingPreamble
* src/graphics/PreviewLoader.cpp (startLoading):
- use the inputenc command and encoding of the buffer
by using the aforementioned new function.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18538 a592a061-630c-0410-9148-cb99ea01b6c8
introduce 'semantic' TeX commands \lyxinserted and \lyxdeleted in order to decouple change tracking
output from dvipost. Raise user warning if dvipost is not installed (i.e. no changes are shown in TeX output)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18237 a592a061-630c-0410-9148-cb99ea01b6c8
Please note that method B_ (translate text to buffer language) is presently broken (at least on Windows)!
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18143 a592a061-630c-0410-9148-cb99ea01b6c8
