The option --enable-qt5 allows configuring for Qt5. The default is Qt4.
Nothing special is done with respect to Qt4, apart from pulling in the
correct libraries. Indeed, other than the core and gui libraries, now
also the concurrent and widgets libraries are needed.
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
* remove unused class TexStream.
* remove unused virtual method Inset::cellXOffset
* remove second argument of FileDialog constructor, which was actually
not used
* remove some dead local code
* remove some unused private members of classes
* in InsetMathNest::updateBuffer, fix the logic of a test
This option is going to be mandatory starting with automake 2.0.
LyX is able to use this since version 2.1, but it turns out that it is
badly implemented in versions of automake older than 1.14.
We rely on some (undocumented) symbol to detect automake 1.14 and
use the subdirs-objects option in this case.
For more details, see:
https://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181023.html
Making everything work with autotools required making a copy of two
files from support/tests. It seems that we should not point to source files
that are handled by another Makefile.am.
Since 00387b2a38 it is possible to construct a dummy Messages object
which does not translate at all. With the old gettext implementation, a
Messages object without a defined language would have used a language from
an environment variable. Therefore, the duplicate definition of _() is no
longer needed. This gettext removal was really a good idea!
When running the test, you'll get the following messages:
Testing ../../src/../lib/layouts/siamltex.layout...
Layout.cpp (268): Cannot copy unknown style `Enumerate'
Testing ../../src/../lib/layouts/svglobal.layout...
Cannot delete style `Dedication'
Testing ../../src/../lib/layouts/svjog.layout...
Cannot delete style `Dedication'
Testing ../../src/../lib/layouts/svprobth.layout...
Cannot delete style `Dedication'
These are no errors of Layout::write(), but they indicate problems in the
definition of the layout files.
Kornel, it would be nice if you could do the cmake part.
The toolbar image is the one Uwe attached to the bug report. Note that
\sideset works only for operators like \sum in the nucleus. LyX allows
any content, so you might get a LaTeX error. I don't know how to prevent
wrong content in the nucleus.
The LaTeX font information are now centralized and outsourced. This removes a lot of hardcoding and duplication and makes it easier to support new LaTeX fonts.
objects. The problem that led to the leak is that these objects can be held in
memory long after the Buffer that created them is gone, mostly due to their
use in the CutStack. So they were previously held in a storage facility, the
DocumentClassBundle. Unfortunately, they were now being created too often,
especially by cloning. It's not really a leak, because they're accessible, but
we weren't ever destroying them.
This new approach uses a shared_ptr instead.
Thanks to Vincent for pointing out const_pointer_cast.
Currently only basic functionality (our math-tipa functionality plus multipar input). Further enhancements (such as proper unicode input and a specific toolbar) are planned. DocBook and XHTML output also need to be audited.
The lyx2lyx reversion routine surely can be improved (help appreciated), and I don't know tex2lyx enough to handle this file format change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40867 a592a061-630c-0410-9148-cb99ea01b6c8
Of course this will only work if output_changes was true when creating the
.tex file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40139 a592a061-630c-0410-9148-cb99ea01b6c8
The PreviewLoader is created directly by Buffer on demand. The PreviewLoader cache was complex and unneeded because there is one and only one PreviewLoader per Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39276 a592a061-630c-0410-9148-cb99ea01b6c8
(hunspell 1.3 is not correctly recognized otherwise).
Patch from Rex Dieter, posted by Jose.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39040 a592a061-630c-0410-9148-cb99ea01b6c8
same directory as their source. The other visible gain is that the size of
src/Makefile is divided by 3 with automake >= 1.9.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34090 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
that have crept into my code. I'm putting it in a separate file becuase
it is going to be included in Counters.h. The other obvious places to
put it would lead to large includes in this file.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33109 a592a061-630c-0410-9148-cb99ea01b6c8
Only for autotools, I don't know how to update cmake and scons, sorry.
For cmake and scons, you should make sure that moc is called on Server.h
using the -D_WIN32 option.
In order to enable the server, specify the LyXServer pipe in
Tools->Preferences->Paths. The path to be entered there must have the
form "\\.\pipe\nameofyourchoice" (without quotes). After that, you can
send commands to LyX. For example, if the pipe path is \\.\pipe\lyxpipe,
typing the following in a terminal:
echo LYXCMD:test:file-open > \\.\pipe\lyxpipe.in
type \\.\pipe\lyxpipe.out
brings up the file dialog and returns the acknowledgment from LyX.
Beware of spaces when using cmd.exe. For example, the following:
echo LYXCMD:test:file-open:foo.lyx> \\.\pipe\lyxpipe.in
will correctly load the document named foo.lyx, but
echo LYXCMD:test:file-open:foo.lyx > \\.\pipe\lyxpipe.in
(notice the space before the redirection) will try to load a
document whose name is "foo.lyx .lyx" because cmd.exe will also
pass the space (sigh).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31189 a592a061-630c-0410-9148-cb99ea01b6c8
So, reapply r29669 and revert r29694. I don't know what should be done
for scons, but there should be no problems ATM.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29696 a592a061-630c-0410-9148-cb99ea01b6c8
order to avoid inadvertently using Qt code in the lyx core library.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29694 a592a061-630c-0410-9148-cb99ea01b6c8
DVI viewer passes back the resolved path, such that the search fails,
as internally LyX uses the unresolved path.
This patch fixes this bug by using the new method FileName::realPath
which resolves a path by getting rid of any '.', '..', or symlink
path components.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29476 a592a061-630c-0410-9148-cb99ea01b6c8
* make it a pure virtual interface
* delete alive() method as this one is not useful anymore since we killed ispell support.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28972 a592a061-630c-0410-9148-cb99ea01b6c8
available to tex2lyx. The point is to move the crucial routines that
deal with modules out of BufferParams.cpp, which tex2lyx does not have,
and into TextClass.cpp, which it does.
This is all cleanup that makes a lot of sense independently.
Note that LayoutModuleList will shortly become a real class.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28456 a592a061-630c-0410-9148-cb99ea01b6c8
For the record, this developer is sorry that the problems with this code were not noticed much earlier. It's not fun to do so much work and then have it all reverted.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24373 a592a061-630c-0410-9148-cb99ea01b6c8
please check your favourite insets, I am sure I broke _something_...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24006 a592a061-630c-0410-9148-cb99ea01b6c8
random-access (i.e. O(log n)) to the n-th element in a list/set. Try
it with 1000000 keys ... no problem.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23213 a592a061-630c-0410-9148-cb99ea01b6c8
