This is a follow-up of bug #8967. The implementation is self-explaining, the
only part which needs a comment is lyx2lyx: Since a 100% correct solution is
not possible, it has been decided not to switch amsmath off in the forward
conversion if no other ams command than \smash[t] and \smash[b] is used, but
to consider it a bug that older versions do not load amsmath automatically for
these commands. In the backward direction it is easy to keep the document
compilable, so just do that.
In collaboration with Scott Kostyshak:
With Qt 4 we could use Q_WS_X11, defined by FindQt4.cmake. In Qt 5,
there is no FindQt5.cmake. Instead we now define our own variable,
QT_USES_X11 by using class QX11Info available only on X11.
(http://qt-project.org/doc/qt-5/QX11Info.html)
The main consequence of this improved support is that now the keytests
can be run (ctest -R "keytest") when LyX is compiled with Qt 5.
Before, with Qt 5 we did not know if X11 was available, which is
needed by xvkbd, so the tests were not enabled. Note, however, that
many tests fail with Qt version 5.2.1 because there was a change in
the event handling mechanism in Qt that causes xvkbd to be unable to
pass capital letters (so case sensitive greps in the tests fail). This
needs to be investigated and reported.
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
This patch improves the cmake bundling process:
- reworked bundle handling for OS X: only when installing resources are copied, otherwise
only the smallest bundle is built
- on OS X, the utility programs (tex2lyx) are now installed in the right location
- it removes some unneeded BUNDLE DESTINATION
- it provides a basic support for QT plugins inclusion
- it properly builds a disk image on OS X (only the background image is missing)
- it fixes the library paths for all executables (not only LyX)
- Use the COPYING file for cmake install license
These started failing after we implemented tests for formats
that are in the complement set to the default format (7ecbb068).
It might be worth it in the future to take a look at each individually
and see whether they are supposed to fail or if there is something LyX
can do to add support for exporting them.
As discussed with Vincent I added 3 new features:
* LyX can now also be installed over an existing installation of the same LyX version if the users really wants this.
(A message box appears recommending not to do so for test releases and when there are problems with an existing installation of the same release.)
* LyX can now also be installed if the uninstaller executable of a former LyX was accidentally deleted.
(That this case was not handled was more a bug. Thanks Vicent for the pointer.)
* If a user set MiKTeX's automatic package installation to "No" the installer will.
(As discussed with Vincent, if a user has disabled this MiKTeX feature he most probably know the consequences. So respect his decision.)
respect that and not re-enable it.
I would be happy if anybody can spend a translation of the changed installer message.
- known problem: if LyX 2.0.x is installed and you install 2.1rc1, the .lyx file associations will not be updated but if LyX 2.1 is installed on a new PC the file associations work (work is in progress)
Define new policy of what export formats to check.
Depending on default_output_format
default or unset xhtml, dvi*, pdf*
xhtml xhtml
any of pfd variants xhtml, pdf*
any of dvi variants xhtml, dvi*
each other (like eps3) as specified
- it turned out that the hack to install a stripped-down Perl directly to MiKTEX is not only error-prone, requires admin permission but that it is also not safe because MiKTeX changes the folder structure from time to time. With the new solution Perl is installed directly for LyX like we do for ImageMagick, Python etc.
- for pdfcrop support there is a bug in pdfcriop that the requirement is hardcoded to Ghostscript 32bit - I contacted the pdfcrop author to fix this
This test was broken after wrap-around search was implemented. From
what I understand, the point of the test is that search should _not_
match in this case because "ignore format" is checked by default.
Thus, a new way of testing that there was no match is to check whether
the wrap around message shows up, because the cursor is initially at
the beginning so that would mean that the entire buffer was checked.
I confirmed that the test now works by checking that it passes and
checking that it fails if "ignore format" is unchecked. Although this
test is still fragile, it is fragile in a conservative way (i.e. it
will give false failures rather than false passes). It will fail if
the Italian translation changes, if "ignore format" is unchecked by
default, or if the wrap-around mechanism changes (e.g. does not ask if
the cursor started at the beginning of the buffer).
The tqrget now works properly when out of source directory qnd uses the $(PYTHON) variable. Also, the use of the error() function has been fixed in the gen_lfun.py script.
This target will update the gmo files if and only if the associated
po-file is modified. To determine whether a file is modified, 'git
status --porcelain' is used.
This follows up on commit 06782542.
This patch changes the user agent and results in the openoffice.org
tests correctly passing. Before, they would give the following error:
Failed, caught error: Status read failed: Connection reset by peer
All the other tests work as before.
Kornel and I are not sure why this change works.
If a perl-submodule exits with 'die()', the process would stop
and the following urls would not be tested.
The bug detection and idea how to solve it: Scott Kostyshak.
The JASATeX class is currently unmaintained. Also, this
commit moves the system font tests from inverted to ignored
(otherwise lualatex and xelatex run in infinite loops).
For many of these XeTeX or LuaTeX does not yet support
using TeX fonts for certain languages. The others fail
because, as Jürgen explains, they have excessive preamble
code that is only targeted at (pdf)latex.
Citing Scott:
In our current set up, we are currently testing XeTeX and LuaTeX
either with system fonts or with TeX fonts but never both. We should
test with both in my opinion. We will have to ignore/invert many tests
but it still seems useful. For example Günter fixed babel-greek so
that it works now with TeX fonts; and Jürgen found some errors in LyX
that were causing some of the English docs to fail with system fonts.
Currently we only test greek documents with system fonts and we only
test English documents with TeX fonts.
This change adds the missing test-cases.
See (thanks to Uwe for the link):
ccb0e9e2c6
We thus invert the LuaTeX Farsi tests.
All inverted tests now have explanations for why they are not
currently expected to work.
We can now test for regressions in the Greek docs for
XeTeX and LuaTeX export with FreeSans.
(Also some Indonesian tests were missing from revertedTests.)
As Kornel has explained:
There is an incompatibility between luainputenc.sty and ectaart.cls.
luainputenc.sty loads luatex.sty. Both files (luatex.sty and
ectaart.cls) define the latex-command \setattribute.
These tests should be inverted because the conflict may one day be
resolved at which point we can begin testing for regressions.
(This commit also rearranges the europeCV lines to below the
corresponding explanation comment.)
Export with XeTeX and LuaTeX (with either non-tex fonts or 8-bit
compatibility mode) does not work because the loading of inputenc with
utf8x is hardcoded in europecv.cls at this time.
This commit adds a note to es/europeCV.lyx explaining the problem and
inverts the XeTeX and LuaTeX tests.
See
http://comments.gmane.org/gmane.editors.lyx.devel/145896
Thanks to Günter Milde for the advice and to Ignacio García
for the translation of the note.
This is a manual lyx2lyx fix. Some of the problematic chunks
are not correctly converted with lyx2lyx so this commit manually
converts them to ERT.
For more details, see:
http://marc.info/?t=137702744100010&r=1&w=2
Similar to Indonesian LuaTeX support (see 7d705438),
"magyar" is not supported. After 2.1 is released,
the babel name of "magyar" should be changed to
"hungarian" (if others disagree then these tests
still should stay inverted).
The babel name of Indonesian should be changed from "bahasa"
to "indonesian". This should be done after 2.1 is released so as
to minimize potential problems such as Jürgen's example of
\addto\captionsbahasa{\renewcommand\chaptername{Foo}}
For more info, see:
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181595.html
From Jürgen:
LuaTeX support in polyglossia is still very new and experimental.
I have this enhancement on the agenda for 2.2, but not for 2.1.
For more details, see:
http://marc.info/?l=lyx-devel&m=138506346715339&w=2
In successful cooperation with Scott Kostyshak.
We provide many lyx-documents which are not compilable with luatex or xetex.
But some of them compile, if we change the font use to non_tex_fonts.
Since this would change the appropriate source, we have to convert
it first into a save location. To make it there compilable,
we have to convert also all file references.
languages used font
he|el|ru|uk 'FreeSans'
fa 'FreeFarsi'
zh_CN 'WenQuanYi Micro Hei'
The whole job is done with a perl script.
The problems the comments in the build systems refer to seem to have been
fixed for years. [1] says the checks in libstdc++ have been improved, and
all supported FreeBSD versions enable wchar_t support unconditionally in
libstdc++. Additionally, this needlessly impacts FreeBSD when libc++ is used
instead of libstdc++.
[1] http://gcc.gnu.org/onlinedocs/libstdc++/faq.html#faq.freebsd_wchar
Given erroneous <lang>.po file, this yields to error on first call
to make. Nonetheless a new <lang>.gmo file is created. The following
calls to make do not get an error.
This patch prevents the <lang>.gmo creation on error.
Problem spotted by Scott.
The tests are now more robust if ctest uses '-j' (number of threads) parameter.
a.) keytests are running in sequence and in one thread only, no other thread running
b.) tex2lyx tests are locking in respect to each other
c.) Test gets one or more labels, so that we can select
ctest -L url
to run tests labeled url
d.) New macro settestlabel() to add labels to a test
Now all urls we use in our provided lyx-files
(doc, examples, templates)
use urls which really exist.
(If a url was meant merely as an example,
it was not touched, but added to file 'knownInvalidURLS'.)
These tests check for broken URLs in the URL insets of
the manuals, examples, and templates.
The tests are disabled by default because the Perl interpreter
is needed.
Later on they can be activated with a flag, as follows:
cmake ... -DLYX_ENABLE_URLTESTS=ON
but for now the connection from the TOP-CMakeLists.txt is left out.
Missing part:
1.) Declaring an setting the option
LYX_OPTION(ENABLE_URLTESTS "Enable for URL tests" OFF ALL)
2.) make the connection
if(LYX_ENABLE_URLTESTS)
add_subdirectory(development/checkurls "${TOP_BINARY_DIR}/checkurls")
endif()
Files, which contain names of ctest-tests controling
whether they should be inverted, or ignored.
We have two such files ATM: revertedTests + ignoredTests
These tests load the .lyx files to see if there are
any parsing errors or other LyX errors/warnings. The
tests fail if LyX writes a line to STDERR that does not
match any of the regexes stored in filterCheckWarnings.
Thanks to Kornel for the CMake expertise and corrections.
This patch was written jointly with him.
a) test export/templates/ectaart_pdf5 removed, because
of incompatibility between ectart.cls and luatex.sty
b) renamed some tests to reflect their purpose
tex2lyx2lyx/roundtrip/ => tex2lyx/cmplyx/
# the tests are comparing files written by lyx (not by tex2lyx)
autotests/ => keytest/
# we are testing reactions of lyx to some key strokes
c) add tests for lyx2lyx. This is rather rudimental, in that it only
checks for created output, error codes and error output.
d) use correct environment variable to set up the userdir for testing
Some export test are known to fail. Checking them every time is cumbersome.
Now, the tests marked in file revertedTests will invert the success condition
and mark the test as INVERTED_SEE-README.ctest.
If some of the tests in revertedTests fails, this is good, and the testname
can be removed from it.
If no libraries are found, XVFBDLIBS is not initialized and the command "list(REMOVE_DUPLICATES XVFBDLIBS)" fails. So, initialize XVFBDLIBS beforehand.
(unless it's already there, in which case it should move to the end of the next paragraph).
Change the preference setting name (mac_like_word_movement to mac_like_cursor_movement)
to better reflect its function.
Patch and description from Bennett Helm
* InsetBox and GuiBox: Use proper empty length instead of the broken -9.99col% trick
* some slight changes to the logic of GuiBox to make sure that values are set as needed.
* lengthToWidget(): handle properly the empty length case. All the other related Qt helpers did it already, it was probably an oversight. Also set the default_unit parameter as optional (not needed in this patch actually, but I got carried away :)
* allow generating LaTeX code for an empty length, since some broken code does that.
The default citation capability of LaTeX is not a true numerical
citation engine, rather it uses a mixture of labels/numbers. Thus
we now distinguish them: "numerical" always increments the bibitem
counter and uses its value as a numerical citation label, while
"default" only uses the bibitem counter when no label is provided.
LyX file format incremented to 471.
I see lot of errors like:
The following string was expected to be '.cpp' or '.h':
LyX.cpp: In member function 'void lyx::LyX::printError(const lyx::ErrorItem&)':
Warning: the error was not parsed correctly.
The following string was expected to be '.cpp' or '.h':
LyX.cpp: In function 'void lyx::error_handler(int)':
These should be used if any new style needs to be introduced in the stable
2.1 series: If the ForceLocal flag of the style is set, it will always be
written to the document header, so that even older 2.1 versions can read
and correctly output the document.
The script does the following:
All .cpp and .h files in the current directory and subdirectories
are checked to see which include statements could be omitted without
causing a build error.
Many of these omissions would not be desired. For example, currently
if you don't include Undo.h in Undo.cpp, there is no error because
Undo.h is included in Cursor.h which is included in Undo.cpp. But
clearly we do want to include Undo.h in Undo.cpp.
See #6305.
- fileformat change
- it was a pity that LyX did not yet support a simple rectangular frame without a defined width but LyX did this for e.g. oval frames
- \fbox and \mbox often occur in TeX files and can now be imported
* Powerdot now also uses the native overlay item arguments
* a list option argument is finally available
* \pause natively supported (like in beamer)
* support for \onslide (via InsetFlex)
* support for \twocolumn
File format change.
With this commit, old beamer frames are converted to new ones. The old styles are removed (including the infamous \lyxframe).
This should be tested with as much beamer documents as possible (I have already done so), also, tex2lyx now probably produces invalid LyX files.
- the installer does nw the job of replacing the magyar.ldf with the fixed version [http://wiki.lyx.org/Windows/Hungarian]
- install the Mongolian hyphenation pattern to MiKTeX
- update eLyXer
- update to new MiKTeX installer that fixes a bug with updating Packages
- don't ship cbgreek because it is so huge that its download would last 10 minutes or more
The xhtml format is always tested, regardless of the default format.
Without this, if the default format is xhtml, CMake gives an error
when trying to add the xhtml test because it was already added.
- the installer will now recognize an already installed 64bit MiKTeX
- the installer will still install 32bit MiKTeX for new installations because biblatex does not yet work with 64bit MiKTeX
- Use the LyX name of encodings instead of the LaTeX names.
The LyX name must be unique, while the name used by LaTeX
not necessarily, e.g. different packages might implement
support for the same encoding.
- Rename koi8 to koi8-r, so that the LyX and LaTeX names match.
- Rename euc-jp-plain to euc-jp-platex, jis-plain to jis-platex
and shift-jis-plain to shift-jis-platex.
- Add utf8-platex encoding (fixes#8408).
LyX file format incremented to 463.
Now all export tests can be run with:
ctest -R "export"
Only export tests for manuals can be run with:
ctest -R "export/doc"
And only export tests for examples can be run with:
ctest -R "export/examples"
Instead of 'autotests/export/doc/' export tests are prefixed
with 'export/doc/'. This has the advantage of the name better
reflecting the test (export tests are not autotests), but has a
disadvantage in that the old name gave a better idea of where the
export test scripts are located (in the autotests directory).
The current code is not able to unset an environment variable, only to set it to an empty value. This patch refactors a bit the Message class and uses a new EnvChanger helper class that allows to change temporarily an environment variable and that is able to unset variables if needed.
The patch also adds new functions hasEnv and unsetEnv in environment.cpp.
Open issues:
* there may be systems where unsetenv is not available and putenv("name=") does not do the right thing;
* unsetenv may lead to leaks on some platforms.
* when using unsetenv, we may need to remove strings from the internal map that setEnv uses.
This file documents which tests are expected to fail. It can be used
to quickly tell if a regression has occurred. This is also useful when
first running tests to get an idea of whether some tests are failing
because of missing dependencies.
keytest.py now only prints one time the command that it is executing for
an assert. The command is already printed in the function responsible
for executing it, so it is not necessary to print the command before
calling that function.
* some functionality is in new modules now
new header locations and library names: QtConcurrent and QtWidgets
* method setResizeMode is renamed to setSectionResizeMode
* deprecated QAbstractItemModel::reset() is dropped now
* platform specific code like QApplication::syncX() is not common anymore
* QString::fromAscii() is dropped now
* some QDesktopServices methods has been moved to QStandardPaths
This test should fail because #7673 is not yet fixed in trunk.
Note that it is fixed in branch.
This is the first autotest that uses an existing .lyx file,
bug-7673.lyx.
If the test opens an existing .lyx file and crashes, it will leave
around a .emergency file. If a test with that same name is run again,
LyX will try to recover the .emergency file, which could throw
off the test.
This is implemented for both CMake and autotools.
LyX 2.0.x supports currently 147 LaTeX-packages. When LyX is first installed on a PC it took therefore about 10 minutes to install all supported and required packages. With the new installation method the installation speed only depends on the Internet speed and lasts with an average bandwidth now only 3.5 minutes.
(chkconfig.ltx asks LaTeX for each package separately and after each package installation the file name database of LaTeX was rebuild. And that cost a lot of time/CPU power)
To reproduce some bugs, tests need to open an existing LyX file. This
is now possible with CMake and is consistent with testing under
autotools in the sense that the .lyx file is referred to in the test
by being in the parent directory.
If the test is named bug-XXXX-in.txt and there exists a file
bug-XXXX.lyx, that file will be copied to the parent directory of
out-home in the build directory.
LaTeX.nsh:
- fix a MiKTeX configuration Problem on 64bit Windows issue discovered in #8417
- don't overwrite MiKTeX's package repository the user might have set purposely
- remove some unused code and simplify some code
- update to JabRef 2.9.2
- LaTeX.nsh: fixe http://nsis.sourceforge.net/Download
- settings.nsh: adapt path so that one needs to adapt less when using the installer source zip file
- add a readme how to build the installer
Some macros defined by wasysym.sty work only in text mode: They either
produce an error in math mode, or wrong output. These symbols are now marked
as text symbols, so that no \ensuremath is created for LaTeX export if they
appear inside \text{}, and the correct images are created.
development/tools/generate_symbols_images.py now checks for each symbol in
lib/symbols whether its image is listed in lib/Makefile.am and whether it has
a toolbar entry in lib/ui/stdtoolbars.inc.
- LaTeX.nsh: assure that if MiKTeX is installed for all users also the missing packages will be installed during the configuration for all users
- configure.nsh: run configure.py twice to assure that really all missing packages are checked/installed
- LaTeX.nsh: fix bug that installer stopped working if LyX was installed the first time on a computer
- init.nsh:
- fix failing installation of Slovakian spellcheck dictionary
- expand list of available dictionaries as requested by users
- dictionaries.nsh: prevent case that the installer could run an infinite loop if the installation of dictionaries was interrupted
- settings.nsh: use a HTTP repository for MiKTeX instead of FTP because many companies deny FTP access by default in their firewalls
The old layouts are still there (marked as deprecated). The new ones are more or less correctly reverted (polishment required), but the old ones not yet converted to the new. Once this is done, a further file format change should be made.
The fix is basically mechanical, the additional code for fraction like insets
with three arguments was stolen from \unitfrac. As any math package,
stackrel.sty needs a buffer parameter to switch it off.
I also added the two stackrel flavours to the toolbar.
The \frametitle command is less convenient to use than the \frame argument, but it provides more options (overlay/action and short title). We thus provide this additionally to the option, like beamer itself does.
This has a list-like structure (with \onslide item commands). The previous implementation was rather useless, since it required lots of ERT. Since the new implementation is so different, we use ERT for conersion/reversion.
The lyx2lyx routines are not yet perfect, though.
The stmaryrd package adds support for lots of math symbols, using a font
designed to accompany the computer modern fonts. The changes in detail:
- Fix generate_symbols_list.py to work with stmaryrd.sty. It loooks like it
was automatically translated from a perl version and never used.
- Generate the new symbols in lib/symbols using generate_symbols_list.py and
add some manual adjustments
- Generate stmary10.ttf by a simple ttf export from stmary10.sfd with fontforge
- Add license info for stmary10.ttf
- Create a test file with all symbols from stmaryrd.sty. Actually it would be
nice to have this for the other fonts as well.
- The mechanics: lyx2lyx, tex2lyx, font machinery etc.
This patch puts all projects into subfolders (at least for MSVS). In this
way, there is a better overview (especially if the number of test projects
will be increasing).
Many test are not running, but if changed the '-dbg xxx' to '-dbg any'
then all of sudden they pass ...
(The buffered output of lyx is often disrupted too early with 'kill -9',
so the expected data are not available for the appropriate test)
Now that we have module support for literate programming, it is possible to do a noweb cleanup. This is basically a patch from Kayvan Sylvan:
- get rid of literate-xxx classes
- rename Scrap to Chunk, since this is the name noweb doc uses (Scrap is from nuweb)
- update lyx file format and add lyx2lyx support for gettting rid of literate-xxx classes
- update documentation
On the top of it, update tex2lyx to
- avoid creating files with literate-xxx class
- fix conflict between parsing << as a quote and parsing it as a Chunk
- create Chunk layouts instead of Scrap ones.
This is already done by the program pdfview every time it is called. This additionally fixes the bug that viewing PDF files could fail if Acrobat was not the default PDF viewer of the system while LyX was installed, but became later the default PDF viewer.
- to be able to support Adobe Reader/Acrobat XI I had to use new binaries for opening/closing PDFs. That way I found the solution for a long standing and super annoying PDF viewing bug (not 100% perfect but works for more than 95% of the cases, while formerly the view failed for all cases where LaTeX run more than once when updating a PDF view)
- avoid doubled semicolon in LaTeX editor path list
- correct path to the JabRef installation folder in LyX's PATH
- updated to JabRef 2.8.1
- rename the installer executables from LyX-205-x-Bundle.exe
- fix uninstallation of Metafile2EPS pinter
- fix un/installation of JabRef if the bundle version is executed without admin privileges
- some whitespace fixes
- dictionaries.nsh: code documentation and simplification
- lyx.nsi: comment out currently unused code
- init.nsh: some corrections and fix bug that info that JabRef and MiKTeX were installed together with LyX was deleted before the uninstaller was really run
- LaTeX.nsh: documentation and fix a bug (for an unknown reason SHCTX can be used to read and delte but not to write in the registry)
- gui.nsh: enable descriptions
- detection: move dictionary code to dictionaries
- detection.nsh:
- fixed detection of the LaTeX source file editors
- removed support for obsolete LaTeX source file editors
- init.nsh:
- don't allow to install an older LyX version over a newer one
- support dictionaries for new languages that will be supported by LyX 2.1
- remove registry entries of current LyX version when installing a newer version over it
- remove the error-prone method of finding dictionaries by renaming some
- add new dictionaries for future LyX 2.1 (more to come)
- update and correct some dictionary sizes
- fix detection of the possible 64bit programs jedit, Gimp, GhostScript and GSview
- remove detection of old Vim version
It is possible to install a newer lyX over an existing older LyX installation, but we cannot allow to install over the same lyX version. Therefore output the version number if this error message is shown
- settings.nsh: update to LyX 2.0.5
- thesaurus.nsh:
- don't download already existing dictionaries when installing over an existing LyX installation
- the list of available dictionaries is 120
- detection:
- detect existing dictionaries
- fix detection of Gimp and Photoshop
- init.nsh: detect existing dictionaries and modify the list of available dictionaries accordingly in the installer sections
Creating LYX_DATE dynamically at configure-time caused unwanted recompilation
of the whole directories (src + src/tex2lyx) because all the relevant objects
were dependent of a common file (flags.make in case of "Unix makefiles") which changed
accordingly.
There is now a new include (lyx_date.h, with only one definition)
Nothing changes for automake, since in this case LYX_DATE is defined in config.h
Just some comments on the patch:
- The executable name has to match the information in Info.plist (development/MacOSX/Info.plist.in and CMakeLists.txt). The autoconf config/lyxinclude.m4 file has been modified to make it work with autotools.
- The process to build OS X bundle is to first add all the files to be included to the bundle when calling add_executable (src/CMakeLists.txt) and then by calling setting the source file property of each of these files (development/cmake/Install.cmake, l.14) so that the files are properly located into the bundle. This is also why Install.cmake has to be included two times in src/CMakeLists.txt (once to build the list of files, once to set the location of the list of files).
- in CMakeLists.txt there is a line
install(CODE "set(BU_CHMOD_BUNDLE_ITEMS 1)")
What it does is to fix the owner permissions within the bundle - this is necessary because some libraries are copied within the bundle and might be owned by root
- An empty qt.conf is included in the bundle so that QT does not try to link to other QT libraries (which will not be included in the bundle)
- In development/cmake/Install.cmake, some OS X specific files (*.sdef, qt.conf, *.icns) have to be included in the bundle
Benjamin
Handle option "LYX_DEVEL_VERSION" to add the preprocesor definition of DEVEL_VERSION
The effect should be alike the configure parameter "--enable-build-type=dev"
With non-TeX fonts, you can select a 'Non-TeX Font Default' math font, which simply loads unicode-math without actually selecting a math font, this then uses the default math otf font, currently Latin Modern. Other fonts still need to be set manually in the preamble, via \setmathfont.
The implementation suppresses unneeded package requests from unicodesymbols, but the output still uses macros instead of full unicode (both is possible with unicode-math).
The whole thing is a proof of concept, and it needs to be tested. I have tested it with the math manual, which compiles and seems to display correctly if I remove some hardcoded package loadings. OTOH I have not much experience with math.
This addresses #7449 partly.
This addresses #6543 by adding an option to prevent fonts such as Palatino and Times to automatically adapt the math font (IOW it lets you load the text font only for a bunch of fonts where this is easily possible).
Furthermore it adds an interface to select a specific math font, which is defined in latexfonts. Currently, this is only euler (the only one I know), but if there are other math-only tex fonts, they can be added easily (but note that this changes the file format).
Non-TeX math fonts are not yet supported. Eventually, unicode-math support can use the existing UI, but this is not on my agenda.
In order to interact with native osx applications, AppleScript support is a plus.
Here is a patch that makes LyX respond to a simple command (run) and that allows to communicate with LyX as with the LyX client.
Example of use:
tell application "LyX" to run "server-get-filename" with argument ""'
returns
message:/Users/bpiwowar/newfile1.lyx, code:0
with a message and the error code
The LaTeX font information are now centralized and outsourced. This removes a lot of hardcoding and duplication and makes it easier to support new LaTeX fonts.
- the proposed install folder is now "LyX 2.0" as discussed
- promote our wiki and also our website (as almost all other programs do as well and which is quite helpful)
- uninstall.nsh: don't uninstall the user preferences by default
- configure.nsh:
- set also the .lyx file association when the user is not admin
- fix the path in which the LyX start menu shortcut is executed
- thanks to the new version of ImageMagick no longer admin permissions are required
- init.nsh: iron out 2 non-admin residues
- language files: add missing entries and remove some unused ones
Setting up .gitignore or .git/info/excludes is something that should
be done. Not doing it makes it a lot harder to see actual new files
that should be added.
Signed-off-by: Lars Gullik Bjønnes <larsbj@gullik.org>
- fix an uninstallation bug that user settings were not remove if requested
- whitespace fix
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40814 a592a061-630c-0410-9148-cb99ea01b6c8
- fix a bug in detection of Gnumeric
- update to latest third-party products
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40688 a592a061-630c-0410-9148-cb99ea01b6c8
To avoid duplicity, remove natbib_authoryear and natbib_numerical
and replace them by natbib, and keep track of the engine `type'
in the new \cite_engine_type document setting. This will make it
easier to add more citation engines.
LyX format incremented to 424.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40592 a592a061-630c-0410-9148-cb99ea01b6c8
- fix bundle installer so that MiKTeX is installed before LyX
- fix some ImageMagick settings
- cleanups and visual feedback for new installations
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40533 a592a061-630c-0410-9148-cb99ea01b6c8
This holds the name of a BibTeX style file for now. Any BibTeX inset
can set the style to "default" to use the document-wide style.
LyX format incremented to 420.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40484 a592a061-630c-0410-9148-cb99ea01b6c8
(But even with these fixes, the script fails, see my mail.)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40190 a592a061-630c-0410-9148-cb99ea01b6c8
The init_package before easyParse is necessary to initiate the default
values for userdir and sysdir, which are now part of the help message.
This step would be necessary anyway if we ever internationalize tex2lyx.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39799 a592a061-630c-0410-9148-cb99ea01b6c8
- Japanese is now handled by passing the option --latex=platex
to the standard lyxpreview script. This is done in PreviewLoader.
- Remove obsoleted file lyxpreview-platex2bitmap.py and the
corresponding lines in the configure script.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39659 a592a061-630c-0410-9148-cb99ea01b6c8
- Handle the preprocessing in the main lyxpreview script with the
command-line arguments --lilypond and --lilypond-book=exe.
- Remove the obsoleted file lyxpreview-lytex2bitmap.py and the
corresponding lines in configure.py.
Fix for the japanese preview still to come.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39658 a592a061-630c-0410-9148-cb99ea01b6c8
- fix bug that LyX's LaTeX files were tried to install although the user denied to use LaTeX.nsh
- propose to add a desktop item for LyX (can be switched off by the user)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39584 a592a061-630c-0410-9148-cb99ea01b6c8
- fix 2 uninstaller issues
- remove support for AFPL Ghostscript (license clash)
- only install Ghostscript if not already installed
- in case there are several Ghostscript installations, use the newest one
- remove an unused variable
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39582 a592a061-630c-0410-9148-cb99ea01b6c8
- \negmedspace and \negthickspace outside of math
- \enspace, \hspace*, \hspace*{\fill} and \hfill inside math
(fileformat change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39557 a592a061-630c-0410-9148-cb99ea01b6c8
Corresponding test-case needed a fix as well and now it is passed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39518 a592a061-630c-0410-9148-cb99ea01b6c8
(patch from yihui, part of #7555)
http://www.lyx.org/trac/ticket/7555#comment:18
This adds the new format "R/S code" with extension .R and a converter from .Rnw.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39509 a592a061-630c-0410-9148-cb99ea01b6c8
