This commit does a bit more than fix selection, since it saves the full cursor state
in the undo stack. This means that undo now restores:
* the selection
* the current font
* transient mark (shall we keep this one?), logical position...
In order to do that, it introduces an intermediate class between Cursor and DotIterator: CursorData.
The new inheritance diagram is thus
DocIteraator -> CursorData -> Cursor
CursorData contains all the members of Cursor that define the current position, but not the stuff
related to current view of dispatch mechanism. It may make sense in the future to move members
between CursorData and Cursor and to move some member functions to CursorData.
Now UndoElement uses CursorData for cur_before and cur_after, but not for the cell. The undo API uses
also CursorData instead of DocIterator.
http://www.lyx.org/trac/ticket/6367
* Undo.cpp:
- rename cur member of UndoElement to cur_before
- add new member cur_after, which is set by Undo::endUndoGroup
- create a new Undo::endUndoGroup variant that takes a Cursor as parameter. We cannot get rid of the old one because it is used for LFUN_COMMAND_SEQUENCE.
* Cursor.cpp:
- use endUndoGroup(Dociterator const &) for dispatch
- update Cursor::endUndoGroup to pass cursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40713 a592a061-630c-0410-9148-cb99ea01b6c8
we will be cautious, of course). The problem was that we were issuing
the Buffer::changed() signal before we did updateBuffer(), and this
caused an inconsistency. The idea here is to defer issuing this signal
until we call processUpdateFlags(). We know we need a redraw if we've
deleted a whole paragraph.
This should work properly, so long as checkDepm is called from within
the dispatch mechanism. There may, however, be other paths, and I've
noted one explicitly with a FIXME in Text2.cpp. I've tested a few
different variations, however, and I haven't seen any problems. But if
we do run into problems, we can go ahead and do the update there that we
were previously doing in checkDepm itself.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40352 a592a061-630c-0410-9148-cb99ea01b6c8
THis is a consequence of the new AtPoint mechanism. In the old
world, recordUndoInset was called before INSET_MODIFY. I reintroduced
manual recordUndoInset calls in all places that matter. I suspect
that this issue should be revisited later.
Note that recordUndoInset can now take an optional parameter that tells
what inset is concerned. This is useful because the cursor can be
either just inside the inset or in front of it.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36580 a592a061-630c-0410-9148-cb99ea01b6c8
In particular, it makes paragraph breaks generate single \n in latex output
when ParbreakIsNewline is true
This means that it is not necessary anymore to use newlines to break lines.
Plain paragraph breaks can be used instead, like is done now in ERT/Listings.
This is mainly aimed at sweave support.
lyx2lyx support courtesy of Richard Heck
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36163 a592a061-630c-0410-9148-cb99ea01b6c8
This bug is related to the fact that the cusor remember the current font.
The on-the-fly spell status should really not be kept in the Font object, but
rather in metrics, IMO.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@35041 a592a061-630c-0410-9148-cb99ea01b6c8
DispatchResult to store a flag that tells us whether we need a buffer
update or not.
So: If you find a missing one, go to an appropriate place in the
dispatch and call cur.forceBufferUpdate() or, if you don't have a cursor
but do have a DispatchResult, call dr.forceBufferUpdate().
There is one remaining call I could not move, in
TextMetrics::redoParagraph. But this looks like an emergency call when
the macro context has not been set. There are also a couple calls that
are connected with buffer creation that I commented out, since the same
call is done again almost immediately. But I'm not positive about those.
Now the nice thing would be to do the same for updateMacros().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34826 a592a061-630c-0410-9148-cb99ea01b6c8
Solution: don't use boost::bind for msvc10 (could also be extended to several GCC versions)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@34257 a592a061-630c-0410-9148-cb99ea01b6c8
a lot of simplification is possible. Except some instability period...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33389 a592a061-630c-0410-9148-cb99ea01b6c8
This required to make Cursor::disp_ mutable.
Also, the server parts now pass a DispatchResult object to dispatch (which is
a good thing anyway).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33259 a592a061-630c-0410-9148-cb99ea01b6c8
This fixes bug #1560.
The diverse setBuffer / updateLabels calls need auditing. See FIXMEs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33249 a592a061-630c-0410-9148-cb99ea01b6c8
If we check whether a cursor is valid, we should also check the anchor_.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33012 a592a061-630c-0410-9148-cb99ea01b6c8
Set the boundary member correctly when the cursor goes to an 'empty' row.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@32034 a592a061-630c-0410-9148-cb99ea01b6c8
pasting a macro inside another math inset (such as \text or \hat). In
this case the buffer would not be set and getMacro() cannot be called,
such that an "internal" macro would still shadow an user defined one.
This kind of fix is now easy after Abdel's overhaul.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31998 a592a061-630c-0410-9148-cb99ea01b6c8
Move the AtPoint handling into the Cursor dispatch machinery
Note that the call to Cursor::getStatus is in BufferView::getStatus, while
the call to Cursor::dispatch is still in LyXFunc::dispatch. This needs to be
fixed, but the code there is a bit fragile.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31969 a592a061-630c-0410-9148-cb99ea01b6c8
Math manual loads and save correctly it seems but expect some instability period.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31898 a592a061-630c-0410-9148-cb99ea01b6c8
This patch initializes the buffer_ member of a MathHull inset in most
(but not all) cases. The problems with buffer_ should be greatly
allievated now, but there still can be some corner case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31873 a592a061-630c-0410-9148-cb99ea01b6c8
defined macros, so better use a brace inset only when strictly needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31789 a592a061-630c-0410-9148-cb99ea01b6c8
* MathStream{.cpp, h}:
- replace bool dryrun() by enum output that also knows whether the stream is for instant preview
* InsetMathHull.cpp:
- tell the stream whether we use it for instant preview.
* MathString.cpp (write):
- gracefully catch encoding exception for instant preview.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30895 a592a061-630c-0410-9148-cb99ea01b6c8
6047: Lyx 1.6.3 unable to typeset the third chemical equation of the
file mhchem.lyx (package mhchem)
4043: mhchem support
5394: support for the mhchems's \ce command
The \ce and \cf insets are text mode environments that allow entering
spaces and mathmode commands. LyX leaves them alone and doesn't try to
be smart, i.e., the behaviour is exactly the same we had in the old days
with text-in-math mode environments, before the introduction of the
\ensuremath and \lyxmathsym macros. This means that in those environments
one has to know what he is doing, as LyX will not offer any protection.
The hack of enclosing \ce and \cf in a \text{} environment in order to
be able to enter spaces is no longer necessary.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30338 a592a061-630c-0410-9148-cb99ea01b6c8
LyX crashes when backward selecting during formula writing
The problem is basically that the anchor is not set (because there is no
selection going on) and BufferView::mouseSetCursor does not handle this.
* Cursor.cpp (anchor): return immediately when there is no selection.
* BufferView.cpp (mouseSetCursor): reset anchor before setting cursor
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30245 a592a061-630c-0410-9148-cb99ea01b6c8
Revert the previous fix and fix the DEPM regression.
This reverts r28910.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29248 a592a061-630c-0410-9148-cb99ea01b6c8
Make sure we jump to the next or previous change when we switch search direction. Without this patch, the same Change will be found and only the cursor is moved from the end (or begin) to the begin (or end) of the selection.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29115 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=5435
The code for this was already present, but was never reached.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28910 a592a061-630c-0410-9148-cb99ea01b6c8
[visual cursor] Crash when cutting a figure caption and moving the cursor.
Avoid negative positions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28629 a592a061-630c-0410-9148-cb99ea01b6c8
[visual cursor] Crash when moving left in table in an RTL document
Avoid negative positions.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28626 a592a061-630c-0410-9148-cb99ea01b6c8
The problem was that, if the master is not opened, no respective guiDelegate exists, and the functions that update the toc do not trigger. The fix is to update the child's toc backend and toc items directly in such cases.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@28551 a592a061-630c-0410-9148-cb99ea01b6c8
The setting of boundary need to take the paragraph's direction (LTR/RTL) into
account.
This bug was discovered by Vincent, while trying to solve bug #5061.
While this fixes the original manifestation of bug #5061, it doesn't really
solve the underlying issue, which is that on a boundary, after typing
Ctrl-Enter, the cursor is painted on the same line as the newline symbol
rather than on the new line. See bugzilla for further discussion of this.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27225 a592a061-630c-0410-9148-cb99ea01b6c8
* Buffer: new updateTocItem() signal (with Delegates and GuiView associates).
* TocBackend: take care of the signal emission instead of the Cursor::checkBufferStructure()
* TocModel: new updateTocItem() method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26636 a592a061-630c-0410-9148-cb99ea01b6c8
anchor is incorrectly set to be equal to the cur. This is because comparing two
CursorSlices does not take into account the boundary property (because the
CursorSlice does not know this).
Patch by Vincent.
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg143572.html
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26393 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=5173
* Undo.cpp (beginUndoGroup, endUndoGroup): new methods.
(UndoElement): add group_id member
(UndoElementStack): when removing old undo entries, make sure to
remove whole groups.
(Undo::Private): add group_id and group_level (for nesting) members.
(doTextUndoOrRedo): new method. Apply _one_ UndoElement.
(textUndoOrRedo): call doTextUndoOrRedo on each element of the current
group.
(recordUndoFullDocument): put inside an undo group
* Cursor.cpp (beginUndoGroup, endUndoGroup): new methods.
* LyXFunc.cpp (dispatch): add calls to (begin|end)UndoGroup.
* lyxfind.cpp (replaceAll): use several recordUndo instead
of one recordUndoFullDocument.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@26178 a592a061-630c-0410-9148-cb99ea01b6c8
Specifically, moved the functions which actually move left or right from Text
into Cursor, and changed the semantics so that they now return whether or not
the cursor has moved. The functions in Text now use the new functions in Cursor.
This change is being made in preparation of the Word-level visual movement.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@24601 a592a061-630c-0410-9148-cb99ea01b6c8
The need for a LayoutPtr arises from the fact that (a) we do not want to give our clients a Layout &, since we do not want them to be able to change our Layout; but (b) we also need to be able to change which layout is ours. So we cannot store a Layout const &. Or so it seems to the compiler.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23522 a592a061-630c-0410-9148-cb99ea01b6c8
first argument after finalizing the macro. This also works with real
math macros.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23449 a592a061-630c-0410-9148-cb99ea01b6c8
* Inset::validate(): renamed to initView()
* InsetCommand:
- get rid of unneeded refresh() and updateButtonLabel_
- setParams(): call initView()
* InsetRef:
- implement initView()
- screenLabel(): transfer code to updateLabels()
- addToToc(): prefix name with BROKEN if the reference is broken.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23417 a592a061-630c-0410-9148-cb99ea01b6c8
Only when an LTR paragraph *ends with* an RTL chunk of text, movement was
incorrect in two ways:
1. After moving into the pargraph from the end, and then trying to move towards
the beginning of the paragraph, the cursor would immediately jump to the
previous pargraph.
2. If the cursor were placed inside the RTL text, and then we would move left
towards the beginning of the paragraph, upon reaching the end (beginning?) of
the RTL chunk, cursor would jump to the end of the paragraph, and then continue
as in (1).
(Same thing, of course, with the reverse situation, i.e., RTL paragraph ending
with LTR text).
We now deal with both of these cases correctly.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23173 a592a061-630c-0410-9148-cb99ea01b6c8
places, i.e.
- BufferView::setMouseCursor,
- BufferView::mouseEventDispatch
- LyXFunc::dispatch
Before it was called from several dispatch handlers in the middle of the
dispatch process. Because the cursor might get invalidated, this is
not a good idea. We had plenty of crashes and odd behaviours because
of this as nobody really understood those cases.
This fixes (at least) #2069 and #4163.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23140 a592a061-630c-0410-9148-cb99ea01b6c8
* completion support for mathed
* experimental completion support for text
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23104 a592a061-630c-0410-9148-cb99ea01b6c8
in any case does not make sense. It's not an index in the sense of DocIterator.
* cosmetics
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22908 a592a061-630c-0410-9148-cb99ea01b6c8
avoidable ~5% overhead when loading the UserGuide. This is an attempt on
rectifying the situation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22532 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Cursor.cpp (selHandle):
- handle mark()
* src/Text.cpp (dissolveInset):
- switch mark off before using selHandle, just in case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22204 a592a061-630c-0410-9148-cb99ea01b6c8
"The idea of the beforeDispX/Y_ variables in the Cursor is to hold the position
of the cursor on screen before the lyxfunc is dispatched. But to get this the
metrics must be valid. It's updated in Cursor::dispatch before the dispatch
loop.
After inserting/deleting stuff (like when deleting the selected text before
inserting the alpha) the metrics are invalid. But the handler for the alpha
calls Cursor::dispatch after the deletion and hence the crash with your second
patch.
Here is a patch fixing that:
The beforeDispatchXY variable do not belong into the Cursor::dispatch because
Cursor::dispatch is often called "manually" by many handlers to some followup
action. So this logic must go somewhere else where it is sure that is not
updated after the metrics got invalidated."
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22193 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
* fixed some other unreported bug when the cursor is not inside or near the macro during fold/unfold
* fixed the bug that the cursor jumped into the first parameter when pasting a macro. This should only happen when the macro was entered interactively
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21611 a592a061-630c-0410-9148-cb99ea01b6c8
* split up the MathData::updateMacro method into the optional and normal parameter part
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21334 a592a061-630c-0410-9148-cb99ea01b6c8
* Font::FontBits -> FontInfo
* Font::FONT_XXX -> all enums transfered to FontEnums.h and renamed to FontXxx
I've replaced Font uses with FontInfo were the language() member was not needed, basically all draw() and metrics methods. There's one problematic cases with InsetQuotes which I solved by taking the Buffer main language.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21240 a592a061-630c-0410-9148-cb99ea01b6c8
In the future, when Cursor has been fixed to work correctly with multiple views of the same Buffer, we could transfer the Undo owner from Buffer to Cursor.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21031 a592a061-630c-0410-9148-cb99ea01b6c8
