xft-fonts package is still required. However, on *nix there seem
to be no way to tell fontconfig to prefer our fonts instead of
others matching the requirements, so, in case of conflict, the
fontconfig files should be manually adjusted, or some existing
font package used (note that the quality of the bakoma fonts is
better than that of the xft ones). There is no such problem on
Windows where our private fonts are always preferred over the
installed ones (and I hope the same holds true for Mac).
* src/LyX.cpp
(LyX::exec): don't call addFontResources() and restoreFontResources()
anymore, as the frontend code will do the job.
* src/frontends/qt4/GuiFontLoader.{cpp,h}
(GuiFontLoader::GuiFontLoader): register math fonts with Qt.
(GuiFontLoader::~GuiFontLoader): unregister math fonts.
* src/support/os.h
* src/support/os_unix.cpp
* src/support/os_win32.cpp
* src/support/os_cygwin.cpp:
remove code dealing with fonts.
* configure.ac: don't check for fontconfig headers anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20128 a592a061-630c-0410-9148-cb99ea01b6c8
- column and row count,
- tabular width and method that goes with it
- method declaration without implementation: void delete_column(col_type)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20032 a592a061-630c-0410-9148-cb99ea01b6c8
That makes another simplification both possible and desirable. For some reason, whenever you change the Document Class combobox in Document Settings, LyX tries to read whatever you choose _before_ you try to hit "Apply". Why? I see no good reason. You get the warning earlier that way, but maybe you weren't going to try to load it anyway and were going to change your mind. So I have removed that behavior, in which case you'll get the warning when you try to apply the parameters. This means we can also remove ControlDocument::loadTextclass().
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19965 a592a061-630c-0410-9148-cb99ea01b6c8
* WorkArea::dispatch(): replace the redraw() call with a Buffer::changed() signal emission in order to update all views of the Buffer, even though some view won't need the redraw...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19867 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This third patch just re-factors some code presently in QCitation*. (It also incorporates some bug fixes that have been committed separately.) We're going to use essentially the same set of widgets for choosing modules that is used for choosing citation keys, so we pull the controlling logic out into a new class, QSelectionManager. I did not make this a QWidget. That seemed to me to be overkill, and it would have made things much more complicated, I think...and I'm not all that experienced with Qt, anyway. Anyone who wants to do that is of course welcome.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19860 a592a061-630c-0410-9148-cb99ea01b6c8
When opening another document, the following is printed to the console:
QWidget::repaint: recursive repaint detected.
QPixmap::operator=: Cannot assign to pixmap during painting
Painter must be active to set rendering hints
[repeated many times here]
Painter must be active to set rendering hints
QPainter:🔚 Painter is not active, aborted
QPixmap::operator=: Cannot assign to pixmap during painting
QPixmap::operator=: Cannot assign to pixmap during painting
currentTabChanged 1File/c/work/file2.lyx
and, when closing LyX:
QPixmap::operator=: Cannot assign to pixmap during painting
QPaintDevice: Cannot destroy paint device that is being painted. Be sure to QPainter::end() painters!
I suspect that solving these issues might also solve the missing close
tab button problem.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19783 a592a061-630c-0410-9148-cb99ea01b6c8
* Toolbar::focusCommandBuffer(): new pure virtual method.
* Toolbars::display(): now return the address of the found toolbar.
* GuiView: get rid of command_buffer_, transferred to QLToolbar.
* QCommandBuffer: replace focus_command with setFocusProxy on edit_;
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19767 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This first patch does some reworking of the infrastructrue. We need to distinguish between the TextClass that a particular document is using and the layout of that document, since modules, in particular, can modify the layout. The solution adopted here is to add a TextClass pointer to BufferParams, which will hold the layout. The layout itself is then constructed from the TextClass the document is using. At present, this is completely trivial, but that will change when modules are added.
The pointer in question is a boost::shared_ptr. This is needed because CutAndPaste saves a copy of the layout with each cut or copied selection. We cannot assume the selection vanishes when the document is closed, so there are two options: (i) keep a list of all the layouts that have ever been used by any document; (ii) used some kind of smart pointer. The latter seems preferable, as the former would waste memory. More importantly, the use of a smart pointer allows modules to be modified on disk and then reloaded while LyX is running, and it will eventually allow the same for layout files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19756 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXView:
- getToolbars(): deleted.
- toolbars_: now protected. The goal is to transfer that to GuiView.
- openLayoutList(): new method. The core should not know how this list is displayed.
- showMiniBuffer(): new pure virtual method to show the mini-buffer.
- focus_command_buffer: deleted.
* GuiView:
- focus_command_widget(): deleted.
- showMiniBuffer(): implemented.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19748 a592a061-630c-0410-9148-cb99ea01b6c8
* BufferView::moveToPosition()
- now only return success boolean
- now schedule a screen centering
- now set the current font to the new position.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19722 a592a061-630c-0410-9148-cb99ea01b6c8
* loadLyXFile::setBuffer(): get rid of a premature optimisation, we make sure that everything is properly drawn in any case.
* GuiView::setCurrentWorkArea(): make sure everything is updated if we don't change tab.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19717 a592a061-630c-0410-9148-cb99ea01b6c8
- setBuffer(): LyXView has no business in setting parent document.
- loadLyXFile(): delete dead code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19703 a592a061-630c-0410-9148-cb99ea01b6c8
* Buffer:
- get rid of cursor_ and anchor_
- ~Buffer(): update the labels of its master buffer before closing
- closing(): pass the Buffer address.
* BufferView():
- BufferView(): needs a valid Buffer (should be const in the future.
- most of the change is about removing all test of buffer_ nullity.
- resize(): deleted.
- setBuffer(): deleted.
* Application:
- newLyXView(): simplification
- updated design description in Application.h
* Gui/GuiImplementation: remove all WorkAreas and BufferView creation/Deletion. Workareas are directly handled by LyXView/GuiView and BufferView is created/delete by WorkArea.
* LyXView/GuiView: implement the new design
What is not working yet:
- the close tab button: it is implemented but does not show up.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19686 a592a061-630c-0410-9148-cb99ea01b6c8
The changes are essentially of three types.
First, the std::maps previously used here for storing BibTeX data have become full-fledged classes and so what were previously just a bunch of functions have now become methods of these new classes. This leads to a lot of minor changes in other files, to adapt to the new signature. The changes in insets/ are mostly of this kind.
Second, there are some slightly more substantial changes in src/insets/InsetBibtex.cpp. We now store lists of the field names and entry types that have been used.
Finally, there are the changes to the citation UI. These are mostly straightforward, though adding the new functionality exposed some inadequacies in the previous code that also had to be fixed.
One other change: BibTeX keys are now docstring. This solves some Unicode issues.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19657 a592a061-630c-0410-9148-cb99ea01b6c8
http://bugzilla.lyx.org/show_bug.cgi?id=4123
* GuiView:
- closeEvent(): set quitting=true only when quitting. I don't know why and how this was changed but it was clearly wrong.
- update_view_state_qt(): only update when focus is in. Make sure this is the current LyXView.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19643 a592a061-630c-0410-9148-cb99ea01b6c8
