This makes the script usable on windows and speeds it up by an order of
magnitude, since no new process needs to be forked for each layout file.
It also does not conevrt .old files again.
This variable was introduced to guard against any bad consequence of the then-new right-to-left
languages support. Let's be bold and get rid of it altogether!
Now right to left support is always enabled.
This is needed so that the new format number is actually used. Since the
conversion is a noop I did not update the layout files (more updates will
come).
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
This makes the defaults of Inset::inheritFont() and Inset::resetFontEdit()
compatible. There is no user visible change except for the Chunk inset which
does not produce invalid LaTeX after editing operations anymore.
This is the safe version for 2.1.0, for later there are still open questions:
- All insets with ResetsFont true should be audited: Is this really needed,
or do they show similar editing problems as the Chunk inset?
- Does inheritFont() need to be customizable in the layout file as well?
- Is resetFontEdit() != !inheritFont() needed at all?
I did not use change tracking for the docs, since I updated all existing
translations.
Fedora ships these chmod 644 and has never seen a problem. The advantage
to doing this is that it better controls what version of python we are
using to launch the script, and it will reveal if we're somehow somewhere
not controlling that properly.
(unless it's already there, in which case it should move to the end of the next paragraph).
Change the preference setting name (mac_like_word_movement to mac_like_cursor_movement)
to better reflect its function.
Patch and description from Bennett Helm
These should be used if any new style needs to be introduced in the stable
2.1 series: If the ForceLocal flag of the style is set, it will always be
written to the document header, so that even older 2.1 versions can read
and correctly output the document.
gnuhtml2latex does not handle encodings at all. Therefore the result is not
imported correctly by tex2lyx if the HTML file is encoded in anything else
than ascii or latin1 (the default of tex2lyx). The simple wrapper script
loads inputenc if needed. It may not be possible to compile the result with
LaTeX, (e.gif utf8 is used), but for running tex2lyx it will work just fine.
Previously, the format used for included pdf files was the same as for
document export via ps2pdf. This caused unwanted conversion routes, e.g.
export via odt->pdf instead of dvi->ps->pdf.
I renamed the format for included graphics and not for exported documents,
since otherwise the command line syntax for export would change. This would
require more adaptions for the users, since with the chosen solution the
custom converters are almost always changed correctly in prefs2prefs(),
so that only custom external templates need manual adjustement.
In particular, lilypond-book is just a python script. On windows,
we need to call the python interpreter, using the full path to
the script while being wary of spaces in the path.
causing a failure when running outside the user tree. This was my
fault: when I refactored this routine, I failed to note that this
variable was now undefined.
I'm afraid, but it's going to be. We skip all comment lines at
the start of the script, but what we want to convert here is in
those comment lines. My previous attempt to deal with this issue
produced an invalid file.
Unfortunately, this doesn't quite work the way one might like. It
is fine for manually converting one's own layouts to the new format,
but it doesn't work if you just start LyX, since the category info
is written at configuration time, not at run time, and chkconfig.ltx
does not run layout2layout.
Implement a more simple and elegant integration of the R package knitr. Now,
lyxknitr.R does not need to move or copy files at all.
This also fixes a bug: when /tmp was on a different file system (e.g.
encrypted home), lyxknitr.R failed to move files to /tmp because it relied on
R's 'file.rename' function, which in turn relied on the rename function in
<stdio.h>, which was failing with the EXDEV errno.
Patch from Yihui Xie.
The listings inset and include inset of type listings use two english terms
that are not localized yet: "Listing" for the caption and "Listings" for the
list of listings (not supported natively by LyX yet). The existing layout
translation mechanism has been extended to translate these terms as well:
1) Support [[stuff]] context in lib/layouttranslations
2) Support BabelPreamble and LangPreamble in InsetLayout
3) Use a InsetLayout for InsetInclude of type listings
4) Define BabelPreamble and LangPreamble in the layouts for InsetInclude
and InsetListings
Add a new layout syntax CiteEngine to define the citation commands
available for a given citation engine.
Also extend the CiteFormat syntax to allow more customization. This
mechanism, previously used to produce bibliography entries in the
citation GUI based on the BibTeX entrytype, is now also used to
produce the textual labels for citation insets in the buffer view.
Thus citation styles are almost completely customizable by modules.
Modules for the basic, jurabib and natbib engines are implemented.
Layout format incremented to 37.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40820 a592a061-630c-0410-9148-cb99ea01b6c8
* avoid creation of file Rplots.pdf in document file
* find correctly Sweave.sty on old R versions
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40703 a592a061-630c-0410-9148-cb99ea01b6c8
When R version is >= 2.13.1, Sweave handles natively encodings. Therefore, we have to remove our own kludge.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40135 a592a061-630c-0410-9148-cb99ea01b6c8
- This preference was used for specifying the papersize to xdvi, dvipdfm,
dvips. However, I can't seem to see any effect on the result.
- The papersize should instead be defined in the document settings.
- The global papersize default was misused to also change the tex
output by specifying the papersize as if it was specified in the
document settings. This caused the same lyx document to be outputted
differently on different pcs.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40028 a592a061-630c-0410-9148-cb99ea01b6c8
Let's have this in trunk for testing. The real difference maker
when it comes to color is whether we use dvipng or ghostscript.
For dvipng:
- The color info is passed as command-line arguments.
- The tightpage option is not necessary, and since it adds
ps specials to the output, we shouldn't use it.
For ghostscript:
- The color info needs to be in the latex file.
- The foreground color is set for each preview inset.
- The background color is set by \pagecolor in the preamble,
which is understood by pdflatex, but ignored in dvips mode.
Thus dvips is handled with a ps special.
- The tightpage option is necessary to crop the images.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39797 a592a061-630c-0410-9148-cb99ea01b6c8
For example, find_exe(["bibtex -min-crossrefs=7"]) should search for
bibtex and if it is found, return the string "bibtex -min-crossrefs=7".
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39794 a592a061-630c-0410-9148-cb99ea01b6c8
(e.g., compressed dia, odg, sxd, ...). These need to be marked via the "zipped=native" flag in the RC file.
The old 'dia' configuration is automatically updated (it used to be hardcoded in the code, now it is handled
via the flag).
See also http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg170974.html
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39705 a592a061-630c-0410-9148-cb99ea01b6c8
Additionnal extensions are separated by commas (,) in lyxrc
preference files, while spaces are ignored, e.g. "jpg, jpeg".
Preference lyxrc file format incremented to 2.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39670 a592a061-630c-0410-9148-cb99ea01b6c8
Use a list of [int, list of functions] pair, representing
- int: the format number, and
- list of functions: what needs to be done to the file to
update it to the given format number.
This matches what is done in lyx2lyx and helps keeping track of
format numbers and their corresponding conversion routines.
Also, add another sanity check.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39668 a592a061-630c-0410-9148-cb99ea01b6c8
- Break up steps 1, 2 and 3 from the legacy preview mechanism.
These are really separate steps.
1) Add color info, run latex
2) Run dvips
3) Run ghostscript
- In the case of pdf output, skip step 2 and go directly to step 3.
- Make sure that we fall back to the legacy conversion whenever we can.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39661 a592a061-630c-0410-9148-cb99ea01b6c8
Introduce --debug and --verbose flags to control output. Also, use the
python subprocess module to capture stderr from external commands, thus
bumping the python requirement to version 2.4 or later.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39660 a592a061-630c-0410-9148-cb99ea01b6c8
- Japanese is now handled by passing the option --latex=platex
to the standard lyxpreview script. This is done in PreviewLoader.
- Remove obsoleted file lyxpreview-platex2bitmap.py and the
corresponding lines in the configure script.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39659 a592a061-630c-0410-9148-cb99ea01b6c8
- Handle the preprocessing in the main lyxpreview script with the
command-line arguments --lilypond and --lilypond-book=exe.
- Remove the obsoleted file lyxpreview-lytex2bitmap.py and the
corresponding lines in configure.py.
Fix for the japanese preview still to come.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39658 a592a061-630c-0410-9148-cb99ea01b6c8
Add command-line arguments in a standard unix fashion, using getopt.
Usage: ./lyxpreview2bitmap.py <options> <input file>
Options:
-h, --help: Show this help screen and exit
--dpi=<res>: Resolution per inch (default: 128)
--png, --ppm: Select the output format (default: png)
--fg=<color>: Foreground color (default: black, ie '000000')
--bg=<color>: Background color (default: white, ie 'ffffff')
--latex=<exe>: Specify the executable for latex (default: latex)
The colors are hexadecimal strings, eg 'faf0e6'.
The changes to PreviewLoader.cpp break the preview of lilypond-book
and japanese files, but they will be handled in the next commits.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39657 a592a061-630c-0410-9148-cb99ea01b6c8
Move some common variables to lyxpreview_tools. Otherwise,
add a few variable names, making it easier to track things.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39656 a592a061-630c-0410-9148-cb99ea01b6c8
