The special mode used by macros where the macro name is displayed as
grey text in a box is now one of the possible marker types for any
inset. The new code puts the macro name below the text, which means
that only the text below the current line will be moved. This makes
edition much more comfortable. The grey border around the contents has
been removed too.
The marker_type enum has been moved from Inset to InsetMath. A
markerMargin() function returns the horizontal margin required on each
side for the marker. Only the corner-type markers MARKER and MARKER2
need some.
A new BOX_MARKER enum value has been added and is taken care of in
afterMetricsMarkers (renamed from metricsMarkerVertical) and
drawMarkers.
The InsetMath::marker() macro now takes a BufferView pointer as
argument, so that the marker type can depend on editing state.
MathRow::metrics now makes changes to the MathRow object when needed.
The specific metrics/draw code in MathMacro has been removed and
replaced by assertions. Code in addToMathRow and marker is adapted to
reflect the cases where linearization is possible.
Now the selection is not done by the inset, but by the MathData
itself. This allows for some code simplification and avoids an
extra redraw.
Additionally, this fixes the selection inside macros, which was broken
by the new MathRow code.
The special mode used by macros where the macro name is displayed as
grey text in a box is now one of the possible marker types for any
inset. The new code puts the macro name below the text, which means
that only the text below the current line will be moved. This makes
edition much more comfortable.
The marker_type enum has been moved from Inset to InsetMath.
A new BOX_MARKER enum value has been added and is taken care of in
afterMetricsMarkers (renamed from metricsMarkerVertical) and
drawMarkers.
The InsetMath::marker() macro now takes a BufferView pointer as
argument, so that the marker type can depend on editing state.
MathRow::metrics now makes changes to the MathRow object when needed.
The specific metrics/draw code in MathMacro has been removed and
replaced by assertions. Code in addToMathRow and marker is adapted to
reflect the cases where linearization is possible.
The enum values BEG_MACRO/END_MACRO and BEG_AR/END_AR are replaced by a
single BEGIN/END pair.
The MathRow code now only knows about insets and math arrays.
New hooks (before|after)(Metrics|Draw) are run by the MathRow code
as needed. They are actually also used internally by the MathMacro
code.
The gain is that most traces of explicit macro handling (and
the MathRow::Element::macro member) have been removed from MathRw.cpp.
The next step will be to extend the tokenizing process to allow for
linearizing insets other than macros.
The goal of this patch is to be able to properly remove the space
needed for markers in the case of insets that are inside macros and do
not need these markers. This was attempted at 9a9a6a8, but did not
work reliably.
To this end, the following simplifications are made:
* instead of drawing its own markers, each inset has a virtual method
marker() which prescribes either NO_MARKER, MARKER (normal bottom
marker) or MARKER2 (top and bottom marker). All explicit calls to
(draw|metrics)Markers(|2) are removed.
* the space necessary for the markers is now counted in the
before/above margins in the row structure. Therefore painting will
not happen at (x + 1, y), but just (x,y).
* the methods drawDecoration are removed.
* the helper methods InsetMath::(draw|metrics)Markers(|2) are removed
and replaced by a new function drawMarkers in MathRow.cpp.
Now the marker type is kept in the MathRow::Element object (and set to
NO_MARKER in not editable context) and the marker is accounted for in
MathRow::(metrics|draw).
Moreover, the extra pixel for the marker is taken on the before/After
space if possible. The marker will only require extra space when
before/after is 0.
See comment 168 of #8883 to understand what issues are fixed.
The rewrite of macro_nesting done at 0f15dcc6 was faulty, in
particular since the information should be available also at draw
time. To this end, we revert the patch of the said commit that removes
macro nesting information from MathRow::Element. In the next commit,
we will change the marker code so that MathRow::draw does not need the
nesting information.
Actually the code is now cleaner since the macro nesting stack of
MathRow::metrics can be removed.
This was missing for macros defined in lib/symbols. This only affects the
equation splitting since global macros are always linearized. This fixes#10107.
Testcase: Define a math macro \AA, overriding the definition of \AA from
lib/symbols, then insert it in math mode.
* Before this commit: \text{\AA}, and \lyxmathsym{\AA} after deleting \text, but
displayed like \AA.
* After this commit: \text{\AA} is inserted, but one gets \AA after deleting
\text. The output is now consistent with the display and the meaning.
* Expected: only \AA is inserted. This is unfortuately not what one gets; for
this to work, the scope of the macros would need to be resolved upon creating
the inset.
About removing the changeEnsureMath in MathMacro::{metrics,draw} : as it is only
called in edition mode, it only happened for user macros for which no ensureMath
is needed anyway. ChangeEnsureMath should indeed be applied for global macros,
but since they are linearized there is no obvious place to call it.
This helper method is used to set the inset position cache at drawing
time. However this is already done by the drawing code itself
(MathRow::draw, RowPainter::paintInset), so that there is no need to
do this same work again in a different place.
Note that the inset positions are still set in InsetTabular::draw for
each cell.
This commit comes with a mild risk attached (it might be that some of
these calls were useful after all!), but all of this is fixable.
Tweak the algorithm so that a BOX math row element can have some
spacing. To this end, MathRow::before/after do not look at the type of
an element for deciding when to skip it, but rather to its math class.
In the new setting, the spacing algorithm works on all elements, but
skips the MC_UNKNOWN elements as if they were not present. As a
consequence, the two element types BEGIN and END have been replaced by
a single DUMMY (they can be recognized from their class).
To simply the code, add a new `mclass' argument to the
MathRow::Element constructor (default is MC_UNKNOWN).
Macro nesting is now recorded into the macro inset itself. This allows
the ArgumentProxy inset to determine whether it is editable or not by
looking at its macro.
Remove code in the metrics and draw methods of ArgumentProxy: this
code is AFAICS not active anymore, since arguments are linearized into
math rows.
Use Changer idiom to change locally the values of MecticsInfo::base.macro_nesting.
This is a long standing issue, present since the new math macros
inception in version 1.6. It manifests as a display issue when a
macro with optional arguments appears in the optional argument of
another macro. In this case the display is messed up and it is
difficult, if not impossible, changing the arguments as they do not
appear on screen as related to a specific macro instance. It also
manifests as latex errors when compiling, even if the latex output
is formally correct, due to limitations of the xargs package used
to output the macros. Most probably, both aspects have the same
root cause, as simply enclosing in braces the macro and its
parameters solves both issues. However, when reloading a document,
lyx strips the outer braces enclosing a macro argument, thus
frustrating this possible workaround.
This commit solves the display issue by correctly accounting for
macros with optional arguments nested in the argument of another
macro, and circumvents the xargs package limitations causing errors
by enclosing in braces the macros with optional arguments appearing
in the argument of an outer macro when they are output. This means
that when loading an old document with such macros and saving it
again, the macro representation is updated and will have these
additional braces. However, as such braces are stripped by lyx on
loading, there is no risk that they accumulate.
See also this thread:
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg197828.html
This fixes the "bad keming" of math ERT (in fact wrong metrics) which recently
was worsened by InsetMathChar substitutions and their MathClass spacing.
Also fix a small inefficiency: always prefer:
Changer dummy = (currentMode() == TEXT_MODE)
? pi.base.font.changeShape(UP_SHAPE) : Changer();
over:
Changer dummy = pi.base.font.changeShape((currentMode() == TEXT_MODE)
? UP_SHAPE : pi.base.font.shape());
The former only records and restores a value when the condition is satisfied,
and does not cost anything otherwise.
There is no reason to reserve pixel space in macros replacement text,
which is not editable. This makes macros more compact and eases the
writing of lib/symbols.
* introduce new InsetMath::drawMarkers and friends that do nothing
when nested inside a macro. This required to move macro_nesting
inside MetricsBase, and to pass MetricsInfo & to metricsMarkers.
* keep track of nesting when drawing rows or macros.
Empty insets should use a minimal amount of space, especially when
they are part of a built-in macro in lib/symbols.
With this change, blue rectangles signal actually editable places.
Empty macros in editable data are shown as grey boxes, but they do not
appear when further nested.
This is done by adding a new type BOX of MathRow::Element object and a
MetricsInfo::macro_nesting that keeps track of macros (and is reset to
0 in editable macro arguments).
* new MathRow class which contains the description of a MathData
object in terms of math class and spacing
+ macros and their arguments used in the MathData object are
linearized (replaced with their contents) so that all math insets
are typeset as a string together. To this end, we introduce a
method addToMathRow to InsetMath and MathData. This method allows
to linearize recursively a MathData object.
+ It is then necessary to set manually the dimension and position of
the macros and arguments.
+ the class class and spacing are computed using the MathClass helpers.
The MathRow data is cached in the MathData object in a bufferview-dependent
way (different dpi for different screens).
* delegate most of the work MathData::metrics/draw to MathRow metrics/draw.
The case of draw is trickier, since many draw() methods rely on their
metrics without any spacing added.
Math macros can be displayed on screen by providing a different
representation than the one used for latex output. This representation
is actually used by lyx even while it is being updated. This leads to
printing useless error messages on the terminal. For example, a macro
parameter has to be entered as \#1 and, if the macro is already used in
a math inset, lyx prints on terminal the error message "Math parse error:
missing token after \\" as soon as one hits the \ key, followed by
"MathMacroArgument::MathMacroArgument: wrong Argument id: -48" as soon as
one hits the # key. So, this is not a useful information and simply
clutters the terminal output. On the other hand, the input is sanitized
even if one stops input after hitting either \ or #, so that no further
messages are issued. Hence, those error messages are simply pointless.
Trying to spare a few cycles by avoiding computing metrics during
screen updates and export. See also 8f86ee74, 72cf7c8f, and e36a8903.
Guillaume will tell whether this also avoids crashing his documents ;)
Some macros defined in the lib/symbols file are classified are texmode.
But the MathMacro class was missing a currentMode method for returning
this information.
Revert to the strategy used at 8f86ee74 but not using mathedWordList
because it may be still uninitialized at load time. Instead, use the
globalMacros method for getting the same info.
There was a thinko at 8ec91e80, because globalMacros always returns
null for user defined macros.
It may happen that mathedWordList is not still updated at load time,
so we would still be using a bogus pointer. Better fetching the
necessary info from the global macro table.
The math macros system is quite complex. Macros are updated during
metrics calculation, so a missing update is very likely to cause a
crash. This commit tries to assure that they are updated at export
time, which also happens when the table of contents is updated.
Moreover, in order to circumvent a possible missing update, when
a math macro is detected we try to avoid using the sym_ member
of the MacroData class, as it may contain bogus values.
This requires to change many docstrings into std::strings. The logic behind that
is that they represent a fixed set of math fonts, and therefore “string” means
here “poor man's enum” rather than text (this is consistent with MetricsBase).
Profiling of scrolling inside a document over macro-instensive areas:
Before the patch:
44,1% BufferView::updateMetrics()
-> 34,8% InsetMathHull::metrics()
-> 9,8% FontSetChanger::FontSetChanger()
28,4% BufferView::draw()
After the patch:
35,3% BufferView::updateMetrics()
-> 27,2% InsetMathHull::metrics
-> 0,4% FontSetChanger::FontSetChanger()
47,5% BufferView::draw()
FontSetChanger::FontSetChanger() is made 41x less expensive (with reference
BV::draw()) just by removing this conversion. The remaining 0,4% could be
squished by replacing the strings with a proper enum, but this is premature. Of
course, this only treats the symptoms: there is no good reason that this
function is called 45500 times over the time of 40 repaints.
RefChanger temporarily assigns a value to a non-const reference of any
kind. RefChanger provides a flexible and uniform generalisation of the various
scope guards previously derived from the old Changer class in MetricsInfo.h.
As before, a temporary assignment lasts as long as the Changer object lives. But
the new Changer is movable. In particular, contorsions are no longer needed to
change a private field. Special code can be moved into the appropriate classes,
and it is no longer necessary to create a new class for each specific use.
Syntax change:
FontSetChanger dummy(mi.base, value);
-> Changer dummy = mi.base.changeFontSet(value);
New function for generating arbitrary Changers:
Changer dummy = make_change(ref, val, condition);
Bugfix:
* Fix the display of \displaystyle{\substack{\frac{xyz}{}}} (missing style
change).
It turns out that it is always better using the copy of the MacroData
for updating the macro_ pointer to avoid problems related to the cursor
position.
This can happen when a macro is copied and then the document where
it is defined is closed. In this case, the macro survives in the
cut stack but the the buffer pointer is dangling.
