This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
It is now possible opening documents that where manually moved to a
different location after they were saved and still produce an output.
Indeed, (hopefully) all needed included files are now still found.
When the moved document is saved again, all paths are accordingly updated.
Of course, for this to work, a document has to be saved in Format 490,
at least.
As an example, after converting the user guide to the last format, it can
be copied anywhere and opened without the need of adapting the paths of
included files or moving them to a proper place.
There is one glitch I am aware of. When moving a child document (but not
the master) the path to the master is correctly updated but it won't be
recognized as such. This is because LyX checks that the parent actually
includes this document but, of course, being the parent document not
touched, it appears not including this child. Anyway, it will also occur
when saving the child to a different location and the user is warned
on the terminal about this fact when the moved child is loaded.
However, there is no problem when it is the master that has been moved.
The algorithm used for breaking a paragraph in LaTeX export is changed
for avoiding spurious blank lines causing too much vertical space.
This change is tied to the introduction of a new inset (with two
different specializations) helping in either outputing LaTeX paragraph
breaks or separating environments in LyX. Both of the above goals were
previously achieved by the ---Separator--- layout and can now be
accomplished by the new inset in a more natural way. As an example,
after leaving an environment by hitting the Return key for two times,
a third return automatically inserts a parbreak inset, which is
equivalent to the old separator layout, i.e., it also introduces a
blank line in the output. If this blank line is not wanted, the
parbreak separator can be changed to a plain separator by a right
click of the mouse. Of course, an environment can still be separated
by the following one by using the Alt+P+Return shortcut (or the
corresponding menu key), but now the plain separator inset is used
instead of the old separator layout, such that no blank line occurs in
the LaTeX output.
Old documents are converted such that the LaTeX output remains unchanged.
As a result of this conversion, the old separator layout is replaced by
the new parbreak inset, which may also appear in places where the old
algorithm was introducing blank lines while the new one is not.
Note that not all blank lines were actually affecting the LaTeX output,
because a blank line is simply ignored by the TeX engine when it occurs
in the so called "vertical mode" (e.g., after an alignment environment).
The old ---Separator--- layout is now gone and old layout files using it
are also automatically converted.
Round trip conversions between old and new format should leave a document
unchanged. This means that the new behavior about paragraph breaking is
not "carried back" to the old format. Indeed, this would need introducing
special LaTeX commands in ERT that would accumulate in roundtrip
conversions, horribly cluttering the document. So, when converting a
modified document to old formats, the LaTeX output may slightly differ in
vertical spacing if the document is processed by an old version of LyX.
In other words, forward compatibility is guaranteed, but not backwards.
Currently only basic functionality (our math-tipa functionality plus multipar input). Further enhancements (such as proper unicode input and a specific toolbar) are planned. DocBook and XHTML output also need to be audited.
The lyx2lyx reversion routine surely can be improved (help appreciated), and I don't know tex2lyx enough to handle this file format change.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@40867 a592a061-630c-0410-9148-cb99ea01b6c8
- \negmedspace and \negthickspace outside of math
- \enspace, \hspace*, \hspace*{\fill} and \hfill inside math
(fileformat change)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@39557 a592a061-630c-0410-9148-cb99ea01b6c8
inset-insert simply swallows the selection, while box-insert, note-insert etc.
put the selection inside the new inset.
As a side effect the toolbar icons get better names, as requested by Uwe.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@36451 a592a061-630c-0410-9148-cb99ea01b6c8
- now accept a full parameter string at construction
- LFUN_INSET_MODIFY now also interprets float type.
* FloatPlacement:
- The float type label is replace with a combo that can be used to
change the type.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33412 a592a061-630c-0410-9148-cb99ea01b6c8
* Bug fix and clean up InsetFloat parameter handling: this is still not very clean as the float type is not really a parameter still... The solution is to defer the float type reading to the actual inset reading, not its creation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@33370 a592a061-630c-0410-9148-cb99ea01b6c8
This patch initializes the buffer_ member of a MathHull inset in most
(but not all) cases. The problems with buffer_ should be greatly
allievated now, but there still can be some corner case.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@31873 a592a061-630c-0410-9148-cb99ea01b6c8
Add an assertion in Inset::dispatch that checks that buffer() == *cur.buffer()
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@30540 a592a061-630c-0410-9148-cb99ea01b6c8
No automatic width calculation is done for old documents, because these might rely on settings in
nomencl.cfg.
A GUI to alter this is needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@29775 a592a061-630c-0410-9148-cb99ea01b6c8
The basic idea was to reuse the corresponding text space inset in the same
fashion as is already done for references. The dialog displays a different
selection for math than for text. If wanted, the additional spaces could
also be enabled for text, but that would be a file format change.
Constructs like \hspace{\mylengthvariable} that are not supported are
treated by the math parser as ERT as before.
For reasons I don't know the context menu does not work, but this is not so
important IMHO (since a left click opens the dialog).
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@27954 a592a061-630c-0410-9148-cb99ea01b6c8
Unfortunately, we can't do a one-short fix for InsetCommand, requiring that it take
a Buffer & in the constructor, due to problems in mathed, specifically, here:
void InsetMathHull::label(row_type row, docstring const & label)
{
...
label_[row] = new InsetLabel(p);
if (buffer_)
label_[row]->setBuffer(buffer());
}
If InsetLabel has to have a Buffer, then buffer_ has to be set, which means InsetMathHull needs a Buffer. But then truckloads of these are created in Parser, where we don't really seem to have access to a Buffer.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25137 a592a061-630c-0410-9148-cb99ea01b6c8
file has been changed to "space" to match the identifier used for the inset in
Inset.cpp and for the dialog in GuiView.cpp.
In future, we will want to get a similar uniformity elsewhere: The identifier
used in the LyX file should match the one used as inset identifier. The easy
way to do this, in the code, is to have insets write themselves this way:
os << insetName(lyxCode()) << " ";
rather than at present:
os << "space ";
Similar things could then happen elsewhere. E.g., if the dialog names are in
sync with the inset names, then we could do something like:
hideDialogs(insetName(lyxCode()), this);
rather than
hideDialogs("space", this);
and perhaps even put that into the Inset destructor rather than have specific
versions in each inset---with a test for whether there is such a dialog, of
course.
But this is all for later.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@25016 a592a061-630c-0410-9148-cb99ea01b6c8
