As Kornel has explained:
There is an incompatibility between luainputenc.sty and ectaart.cls.
luainputenc.sty loads luatex.sty. Both files (luatex.sty and
ectaart.cls) define the latex-command \setattribute.
These tests should be inverted because the conflict may one day be
resolved at which point we can begin testing for regressions.
(This commit also rearranges the europeCV lines to below the
corresponding explanation comment.)
Export with XeTeX and LuaTeX (with either non-tex fonts or 8-bit
compatibility mode) does not work because the loading of inputenc with
utf8x is hardcoded in europecv.cls at this time.
This commit adds a note to es/europeCV.lyx explaining the problem and
inverts the XeTeX and LuaTeX tests.
See
http://comments.gmane.org/gmane.editors.lyx.devel/145896
Thanks to Günter Milde for the advice and to Ignacio García
for the translation of the note.
This is a manual lyx2lyx fix. Some of the problematic chunks
are not correctly converted with lyx2lyx so this commit manually
converts them to ERT.
For more details, see:
http://marc.info/?t=137702744100010&r=1&w=2
Similar to Indonesian LuaTeX support (see 7d705438),
"magyar" is not supported. After 2.1 is released,
the babel name of "magyar" should be changed to
"hungarian" (if others disagree then these tests
still should stay inverted).
The babel name of Indonesian should be changed from "bahasa"
to "indonesian". This should be done after 2.1 is released so as
to minimize potential problems such as Jürgen's example of
\addto\captionsbahasa{\renewcommand\chaptername{Foo}}
For more info, see:
http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg181595.html
From Jürgen:
LuaTeX support in polyglossia is still very new and experimental.
I have this enhancement on the agenda for 2.2, but not for 2.1.
For more details, see:
http://marc.info/?l=lyx-devel&m=138506346715339&w=2
In successful cooperation with Scott Kostyshak.
We provide many lyx-documents which are not compilable with luatex or xetex.
But some of them compile, if we change the font use to non_tex_fonts.
Since this would change the appropriate source, we have to convert
it first into a save location. To make it there compilable,
we have to convert also all file references.
languages used font
he|el|ru|uk 'FreeSans'
fa 'FreeFarsi'
zh_CN 'WenQuanYi Micro Hei'
The whole job is done with a perl script.
The problems the comments in the build systems refer to seem to have been
fixed for years. [1] says the checks in libstdc++ have been improved, and
all supported FreeBSD versions enable wchar_t support unconditionally in
libstdc++. Additionally, this needlessly impacts FreeBSD when libc++ is used
instead of libstdc++.
[1] http://gcc.gnu.org/onlinedocs/libstdc++/faq.html#faq.freebsd_wchar
Given erroneous <lang>.po file, this yields to error on first call
to make. Nonetheless a new <lang>.gmo file is created. The following
calls to make do not get an error.
This patch prevents the <lang>.gmo creation on error.
Problem spotted by Scott.
The tests are now more robust if ctest uses '-j' (number of threads) parameter.
a.) keytests are running in sequence and in one thread only, no other thread running
b.) tex2lyx tests are locking in respect to each other
c.) Test gets one or more labels, so that we can select
ctest -L url
to run tests labeled url
d.) New macro settestlabel() to add labels to a test
Now all urls we use in our provided lyx-files
(doc, examples, templates)
use urls which really exist.
(If a url was meant merely as an example,
it was not touched, but added to file 'knownInvalidURLS'.)
These tests check for broken URLs in the URL insets of
the manuals, examples, and templates.
The tests are disabled by default because the Perl interpreter
is needed.
Later on they can be activated with a flag, as follows:
cmake ... -DLYX_ENABLE_URLTESTS=ON
but for now the connection from the TOP-CMakeLists.txt is left out.
Missing part:
1.) Declaring an setting the option
LYX_OPTION(ENABLE_URLTESTS "Enable for URL tests" OFF ALL)
2.) make the connection
if(LYX_ENABLE_URLTESTS)
add_subdirectory(development/checkurls "${TOP_BINARY_DIR}/checkurls")
endif()
Files, which contain names of ctest-tests controling
whether they should be inverted, or ignored.
We have two such files ATM: revertedTests + ignoredTests
These tests load the .lyx files to see if there are
any parsing errors or other LyX errors/warnings. The
tests fail if LyX writes a line to STDERR that does not
match any of the regexes stored in filterCheckWarnings.
Thanks to Kornel for the CMake expertise and corrections.
This patch was written jointly with him.
a) test export/templates/ectaart_pdf5 removed, because
of incompatibility between ectart.cls and luatex.sty
b) renamed some tests to reflect their purpose
tex2lyx2lyx/roundtrip/ => tex2lyx/cmplyx/
# the tests are comparing files written by lyx (not by tex2lyx)
autotests/ => keytest/
# we are testing reactions of lyx to some key strokes
c) add tests for lyx2lyx. This is rather rudimental, in that it only
checks for created output, error codes and error output.
d) use correct environment variable to set up the userdir for testing
Some export test are known to fail. Checking them every time is cumbersome.
Now, the tests marked in file revertedTests will invert the success condition
and mark the test as INVERTED_SEE-README.ctest.
If some of the tests in revertedTests fails, this is good, and the testname
can be removed from it.
If no libraries are found, XVFBDLIBS is not initialized and the command "list(REMOVE_DUPLICATES XVFBDLIBS)" fails. So, initialize XVFBDLIBS beforehand.
(unless it's already there, in which case it should move to the end of the next paragraph).
Change the preference setting name (mac_like_word_movement to mac_like_cursor_movement)
to better reflect its function.
Patch and description from Bennett Helm
* InsetBox and GuiBox: Use proper empty length instead of the broken -9.99col% trick
* some slight changes to the logic of GuiBox to make sure that values are set as needed.
* lengthToWidget(): handle properly the empty length case. All the other related Qt helpers did it already, it was probably an oversight. Also set the default_unit parameter as optional (not needed in this patch actually, but I got carried away :)
* allow generating LaTeX code for an empty length, since some broken code does that.
The default citation capability of LaTeX is not a true numerical
citation engine, rather it uses a mixture of labels/numbers. Thus
we now distinguish them: "numerical" always increments the bibitem
counter and uses its value as a numerical citation label, while
"default" only uses the bibitem counter when no label is provided.
LyX file format incremented to 471.
I see lot of errors like:
The following string was expected to be '.cpp' or '.h':
LyX.cpp: In member function 'void lyx::LyX::printError(const lyx::ErrorItem&)':
Warning: the error was not parsed correctly.
The following string was expected to be '.cpp' or '.h':
LyX.cpp: In function 'void lyx::error_handler(int)':
These should be used if any new style needs to be introduced in the stable
2.1 series: If the ForceLocal flag of the style is set, it will always be
written to the document header, so that even older 2.1 versions can read
and correctly output the document.
The script does the following:
All .cpp and .h files in the current directory and subdirectories
are checked to see which include statements could be omitted without
causing a build error.
Many of these omissions would not be desired. For example, currently
if you don't include Undo.h in Undo.cpp, there is no error because
Undo.h is included in Cursor.h which is included in Undo.cpp. But
clearly we do want to include Undo.h in Undo.cpp.
See #6305.
- fileformat change
- it was a pity that LyX did not yet support a simple rectangular frame without a defined width but LyX did this for e.g. oval frames
- \fbox and \mbox often occur in TeX files and can now be imported
* Powerdot now also uses the native overlay item arguments
* a list option argument is finally available
* \pause natively supported (like in beamer)
* support for \onslide (via InsetFlex)
* support for \twocolumn
File format change.
With this commit, old beamer frames are converted to new ones. The old styles are removed (including the infamous \lyxframe).
This should be tested with as much beamer documents as possible (I have already done so), also, tex2lyx now probably produces invalid LyX files.
- the installer does nw the job of replacing the magyar.ldf with the fixed version [http://wiki.lyx.org/Windows/Hungarian]
- install the Mongolian hyphenation pattern to MiKTeX
- update eLyXer
- update to new MiKTeX installer that fixes a bug with updating Packages
- don't ship cbgreek because it is so huge that its download would last 10 minutes or more
The xhtml format is always tested, regardless of the default format.
Without this, if the default format is xhtml, CMake gives an error
when trying to add the xhtml test because it was already added.
- the installer will now recognize an already installed 64bit MiKTeX
- the installer will still install 32bit MiKTeX for new installations because biblatex does not yet work with 64bit MiKTeX
- Use the LyX name of encodings instead of the LaTeX names.
The LyX name must be unique, while the name used by LaTeX
not necessarily, e.g. different packages might implement
support for the same encoding.
- Rename koi8 to koi8-r, so that the LyX and LaTeX names match.
- Rename euc-jp-plain to euc-jp-platex, jis-plain to jis-platex
and shift-jis-plain to shift-jis-platex.
- Add utf8-platex encoding (fixes#8408).
LyX file format incremented to 463.
Now all export tests can be run with:
ctest -R "export"
Only export tests for manuals can be run with:
ctest -R "export/doc"
And only export tests for examples can be run with:
ctest -R "export/examples"
Instead of 'autotests/export/doc/' export tests are prefixed
with 'export/doc/'. This has the advantage of the name better
reflecting the test (export tests are not autotests), but has a
disadvantage in that the old name gave a better idea of where the
export test scripts are located (in the autotests directory).
