These are biblatex-specific multicite commands that allow for multiple
pre- and postnotes, as in:
\cites(pre)(post)[pre1][post1]{key1}[pre2][post2]{key2}...
with an optional general pre- and postnote, which applies to the whole
list (like [][] in normal cite commands) and an optional pre- and
postnotes for each item, so that pagination can actually be specified in
multi-cite references, as in:
(cf. Miller 2015, 2; furthermore Smith 2013, 23-23; Jenkins 2012, 103,
also refer to chapter 6 in this book)
See the biblatex manual, sec. 3.8.3., for details.
File format change.
inset.
If the reference is "sec:mysec", then this will output just "mysec".
This is what is needed, e.g., to use refstyle's range commands, e.g.,
\secrangeref{mysec1}{mysec2}
You *cannot* use:
\secrangeref{sec:mysec1}{sec:mysec2}
even if those are the actual labels.
Eventually, I'd like to add native support for this, but I'm a bit
frightened of trying to make the reference dialog support multiple
selections.
We use the more comprehensive cochineal package if available and fall
back to the crimson package, if not.
Math support is provided by means of newtxmath
Fixes: #9974, #9976
* b `british' (``inner quotation'')
* w >>swedishg>> ('inner quotation') ["g" = Guillemets]
* f <<french>> (``inner quotation'')
* i <<frenchin>> (<<inner quotation>>) ["in" = Imprimerie Nationale]
* r <<russian>> (,,inner quotation``)
Rename "french" to "swiss"
Also rename "single/double" to "secondary/primary" ("inner/outer" in
the UI) and "left/right" to "opening/closing". Note that the inset
identifier string is left as is ("s/d" and "l/r")
- fileformat change
- I could not update the tex2lyx test files because of bug #10440
- maybe the lyx2lyx routine could be improved but since a document can also begin with another layout than "Standard" I could not use the lyx2lyx function put_cmd_in_ert
Load required package textcomp.
Replace call to non-existent packages textcyr and textgreek with the backup definition of the commands as done by LyX export.
Do not load marvosym (clash with pifont) (LyX does not load the package either).
Remove invalid command \\ascii.
From Günter [1]:
the difference is the textcommand for ETB which changed from
{\ascii\ETB} to
0x21a8 "\\ETB" "ascii" "force=utf8" # UP DOWN
ARROW WITH BASE
because the former resulted in
l.513 \ascii
\ETB{}
! Undefined control sequence.
[1]
https://www.mail-archive.com/search?l=mid&q=nr48qn%242gb%241%40blaine.gmane.org
The external date inset was implemented as a demonstrator for external insets
in general. It was never intended for production code. Now that we have several
external insets defined we do not need the demonstrator anymore. This fixes
bugs #4398 and #9948.
As discussed on the list. If no C++11 compiler is found configuration stops
with an error. There are now unneeded parts of boost, the will be removed in
a second commit.
The included iconv should not be used on Linux or OS X, but (depending on
local configuration) it might be needed for crosscompiling a mingw target
from Linux. Now the user can choose whether to use the included iconv or not.
cmake does already support that.
eilseq.m4 was taken from the original libiconv 1.14 package.
The included zlib should not be used on Linux or OS X, but (depending on
local configuration) it might be needed for crosscompiling a mingw target
from Linux. Now the user can choose whether to use the included zlib or not.
cmake does already support that.
zconf.h.in was taken from the original zlib 1.2.8 package. The generation of
zconf.h was made equivalent to the one generated by cmake.
This is the same as the parbreak separator and is represented on screen
as the old parbreak. Old parbreak separators are converted to latexpar
separators when they are used for introducing blank lines in the
latex output rather than for separating environments.
Instead, parbreak separators are now represented on screen by a
double line. In essence, latexpar and parbreak separators produce
the same output but are represented differently on screen.
The context menu does not account for latexpar separators and only
"true" separators can be turned each into the other one.
The term LongTable has been deprecated and moreover the renaming makes the interface easier to the eye.
File format updated to 507. (conversion based on jamatos patch)
Layout format updated to 60.
tex2ylx tests updated.
Document EmbeddedObjects.lyx has been updated.
We open the input file now twice: The first time in latin1 encoding to read
the document encoding from the preamble. This does always work, since
traditional TeX does not allow non-ASCII contents without an encoding changing
command (except for comments, but we do not need them, and using latin1 rather
than utf8 ensures that they do not produce an iconv exception, but are simply
recored with wrong characters), and we do detect the utf8 based TeX engines
XeTeX and LuaTeX as well. The second time we open the file directly with the
document encoding.
This fixes a few tex2lyx tests on OS X, since changing the encoding of an
open file steam does not work with clang on OS X. Files using more than one
encoding are still broken, but all single-encoding files are fixed now.
This does not make any difference currently, since the only instance of the
Preamble class is a global one, but it is cleaner and will be needed for
parsing the encoding with a second Preamble instance.
Increment LyX format to 504.
With this new parameter, the user can indicate that some other parameters that
are frequently switched must not be recorded in the file (as if they were a
setting specific to the user or transient, rather than a document setting). This
will play nicer with version control systems.
See the discussion, e.g.:
http://thread.gmane.org/gmane.editors.lyx.devel/157824/focus=157993 (third
solution mentioned)
TODO:
* The interface remains to be set up. We cannot change this setting from LyX
for now.
* If save_transient_properties is false, we should read the user setting as a
per-user-per-document (session) setting (e.g. like the cursor position).
* Once the above is done, we can treat \justification the same way (but it would
be even better if \justification was moved to lyxrc).
The lib/unicodesymbols part is based on work by Günter Milde:
Both, \r{A} and \AA (rsp. \r{a} and \aa) are equivalent standard LICR macros
for Aring/aring as well as the deprecated "angstrom sign" character (212B).
However, with \AA for 212B and \r{A} for 00C5, tex2lyx converts \AA to the
deprecated "angstrom sign" which is missing in many fonts including the
Unicode version of Latin Modern.
I added the normalize_c() calls so that tex2lyx prefers the precomposed forms
(these are better editable in LyX) and the deprecated flag.
The conversion is not completely correct yet, but adding the test before the
fix has the advantage that the fix can easily be documented by changing the
test reference.
When importing TeX code like
%comment
TEXT
the LyX document currently becomes
[ERT %comment] TEXT
so that TEXT is now part of the comment.
Now output_comment adds a trailing newline if the token after the
comment is not a newline. Note that the newline that marks the end of
the comment has already been parsed at this point.
tex2lyx tests have been checked manually and updated.
Fixes ticket #9551.
This is one part of bug 9744: If you toggle between TeX fonts and non-TeX
fonts, the settings of the other choice are no longer thrown away, but stored
and re-activated if you switch back. Most parts of the patch are purely
mechanical (duplicating some BufferParams members), the only non-mechanical
change is in the GUI logic.
PDF properties (Author, Title...) need to be quoted properly when writing (normal operation and tex2lyx). Also, reading them requires to use Lexer::getString() directly, because >> uses next(), which does not handle escapes.
Fixes bug #9830.
The execution took some time and the messages were delayed
until all test files were processed. Now as each testfile
is processed, the appropriate messages are printed.
There is also a new target: cleanupdatetex2lyxtests
It is the same as updatetex2lyxtests, but removes also
some extra created files from the source directory.
Cmake versions prior to 2.8.11 don't know this command, but
our minimal requirenment is 2.6.4
Thank to Vincent, it is replaced by using 'if(file1 IS_NEWER_THAN file2)' comparision.
The horizontal alignment changes caused a regression for documents in older
formats. This could have been fixed by adding the following lines to the
format entry for 489 in development/FORMAT:
Previously, the horizontal position was ignored except for the
following parameter combinations:
- fixed width and type Boxed and without inner box
- fixed width and any type and with inner box and with makebox
Now, it is also used for the parameter combination below:
- makebox is not used and not (type Boxed and without inner box)
and a corresponding conversion to convert_BoxFeatures() in
lib/lyx2lyx/lyx_2_2.py. However, it was decided to revert the box alignment
changes instead: The box alignment can contradict the paragraph alignment. A
better way to avoid the additional space that can be created by paragraph
alignment (which was the motivation for implementing box alignment) is the
same as for table cells (see noTrivlistCentering() in src/Paragraph.cpp).
This would be a file format change and it is too late now for 2.2.0.
See http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg188147.html for the
complete discussion (subject "Regression in lyx2lyx box alignment").
The correct mappings break the tex2lyx roundtrip tests because both,
the tests and tex2lyx use the wrong mapping (\b for "combining minus below").
Fix tex2lyx and the test files so that round-trip tests pass again.
These were found by cppcheck:
Member variable 'x' is not initialized in the constructor.
The crash #9788 would not have happened if this had been done earlier.
There are still a few warnings of the kind
(style) Variable 'x' is assigned a value that is never used.
since I did not touch code where I was not sure whether there might be a real
bug, and I kept some for symmetry reasons as well.
These were all flagged by "(style) The scope of the variable 'x' can be reduced."
Narowing the scope improves readability, and if it is in a loop then the
compiler will be clever enough to produce efficient code, we do not need
manual optimization for POD types.
As Günter found out running the tex2lyx tests overwrites the test references
if the build directory is identical to the source directory. Therefore the
tests would always pass, but git diff would show a non-empty diff if the tests
should have failed. Since it is better anyway to build in a separate directory
we simply do not support srcdir = builddir for the tests and abort with an
error.
This brings the external inset on par with the graphics insets as far as the
clipping option is concerned. The graphicxs package supports both: A bounding
box without units (which means that bp ia assumed), and a bounding box with
units, so we can simply output the values including the units.
Being able to compile document with zipped .eps files was a useful feature of
the graphicxs package 20 years ago, but the LyX support is no longer relevant:
- The flag is ignored if preview is on
- If pdflatex is used then uncompressing happens during the compilation anyway
- If set, the flag prevents LyX from issuing proper error messages if
something with the image is wrong
- For hard disk capacities from 20 years ago not uncompressing is a useful
feature, but for current hard disk capacities it does not matter
- The external inset does not have it, and if we want to merge both insets
one day we would need to implement it there, which is even more difficult
than in InsetGraphics
Unfortunately I overlooked in 44f73b0650 that the first three whitespace
changes in box-color-size-space-align.lyx.lyx were actually correct, so they
should not have been reverted. In detail:
1), 2): The space after \raggedleft must not be part of the ERT inset, but it
is ouput by check_space() as part of the standard text which follows.
3): The space in front of www is caused by the fact that there is a
newline between the opening brace of the parbox and the \centering
command, so this space is not the one after \centering (which is
correctly swallowed). This additional space is in fact not needed,
and the contents would look better in LyX without it, but since it is
not caused by special code I'll put it back in the refernce for now.
We can still improve this in the future if anybody has a good idea.
The remaining whitespace issues are all fixed by a simple change in
parse_text(): Instead of always eating whitespace after detecting \centering
et al, and always output a space as part of the ERT if these commands need an
ERT, let the standard space handling mechanism kick in: skip whitespace if
no ERT is used (in this case LyX will always output the needed space), and
do not touch whitespace if an ERT is used.
These should not have been done without discussion.
- Removal of the dcolumn table in 1a8b74f5e1. Even if LyX does not support
dcolumn anymore, it is still a useful test whether tex2lyx imports it
correctly.
- Removal of the first "%% LyX" line. A long time ago it was decided (after
long discussion between at least Jean-Marc, Uwe and me), that this line is
interpreted by tex2lyx, and used to remove some LyX-generated preamble code.
These lines in the current tests exist on purpose (one can see in the diff
how the removal added unwanted stuff). I do not really like the
interpretation of the "%% LyX" line, but if this behaviour is to be changed
then this needs discussion first.
- Changed comment of \date. The comment was put there on purpose, and the
warning which was "fixed" by the change hints at a limitation in LyX, not a
tex2lyx problem (LyX does not know that a comment inset between some title
insets is OK). The roundtrip .tex output was OK with the old version.
- Change of \verbatiminput{foo}. This was supposed to test whether a
verbatim inset is correctly created even if the included file does not
exist.
- Removal of \lyxlines. Although these tests test input of files created by
old LyX versions, they are useful.
- Change of the lemma in test-modules.tex. The old version was put there on
purpose, and the file itself explains why it is translated to ERT.
There is a general problem of tex2lyx handling theorems. it is not sufficient to cure only one instance as I did. For more info see bug #9561.
Update the references accordingly.
