Also a few cosmetical changes where I xould not resist.
Would be nice if the 'modules people' could verify that their baby
is strill alive...
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@23154 a592a061-630c-0410-9148-cb99ea01b6c8
(No need to backport for 1.5, originated in 'polishing readability' in
http://www.lyx.org/trac/changeset/22519)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22591 a592a061-630c-0410-9148-cb99ea01b6c8
avoidable ~5% overhead when loading the UserGuide. This is an attempt on
rectifying the situation.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22532 a592a061-630c-0410-9148-cb99ea01b6c8
* DocIterator as MacroPosition
* Iterative search for macro in scope until a visible one is found.
This include the ability to resolve macro inside nested text insets.
* Speed up macro lookups by factor 2: only getMacro(name) call, no
further hasMacro(name) call before
* Both way child/master support
* Correct macro scope for multi-paragraph environments
* Correct macro scope for multi-depth-paragraphs
* Buffer::updateMacros made const
* Update macros when loaded (of master and child)
* Do not remove too many braces when unfolding a macro. This could
lead to a data loss because the relationship between arguments of
macros can be mixed up if nested macros are unfold at once.
* Reduce dependencies to MetricsInfo in MathMacro
* Update macros when needed. Normally it's done just before doing
metrics. But in cases without a brace around some constructs (like
\left(bla\right)) there is some help needed.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@22241 a592a061-630c-0410-9148-cb99ea01b6c8
* LyXFunc: Transfer and simplify LFUN_BUFFER_WRITE, LFUN_BUFFER_WRITE_AS and LFUN_BUFFER_WRITE_ALL to GuiView.
* BufferList: Transfer quitWriteAll() and close() to GuiView.
* Buffer: Transfer writeAs() and menuWrite() functionalities to GuiView.
* LyXView::closeBuffer(): new pure virtual method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21960 a592a061-630c-0410-9148-cb99ea01b6c8
Now support/* should have no dependencies on src/* anymore.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21851 a592a061-630c-0410-9148-cb99ea01b6c8
introduce isReadableDirectory
replace isReadable by either isReadableFile or isReadableDirectory
remove isReadable
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21769 a592a061-630c-0410-9148-cb99ea01b6c8
Would be nice if people tested read/write, and Bo perhaps the 'embedded'
feature?
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21492 a592a061-630c-0410-9148-cb99ea01b6c8
- Move Changes.h out of Paragraph.h
- pimpl the inset list.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@21033 a592a061-630c-0410-9148-cb99ea01b6c8
(maily move layout related enums into a header of there own to remov
include dependencies, alos rename a few things)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@20598 a592a061-630c-0410-9148-cb99ea01b6c8
Design goal: Allow the use of layout "modules", which are to LaTeX packages as layout files are to LaTeX document classes. Thus, one could have a module that defined certain character styles, environments, commands, or what have you, and include it in various documents, each of which uses a different document class, without having to modify the layout files themselves. For example, a theorems.module could be used with article.layout to provide support for theorem-type environments, without having to modify article.layout itself, and the same module could be used with book.layout, etc.
This first patch does some reworking of the infrastructrue. We need to distinguish between the TextClass that a particular document is using and the layout of that document, since modules, in particular, can modify the layout. The solution adopted here is to add a TextClass pointer to BufferParams, which will hold the layout. The layout itself is then constructed from the TextClass the document is using. At present, this is completely trivial, but that will change when modules are added.
The pointer in question is a boost::shared_ptr. This is needed because CutAndPaste saves a copy of the layout with each cut or copied selection. We cannot assume the selection vanishes when the document is closed, so there are two options: (i) keep a list of all the layouts that have ever been used by any document; (ii) used some kind of smart pointer. The latter seems preferable, as the former would waste memory. More importantly, the use of a smart pointer allows modules to be modified on disk and then reloaded while LyX is running, and it will eventually allow the same for layout files.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19756 a592a061-630c-0410-9148-cb99ea01b6c8
* src/Paragraph.cpp (expandLabel): if the labelstring is empty,
use \thecounter instead; when processing @layout@ tokens, pass the
process_appendix boolean.
* src/buffer_funcs.cpp (setLabel):
* src/insets/InsetFoot.cpp (updateLabels):
* src/insets/InsetCaption.cpp (updateLabels): use
Counters::theCounter.
* src/insets/InsetBibitem.cpp: remove the ad-hoc numbering code
and replace it with a proper updateLabels-based solution.
* src/insets/InsetCommands.cpp (refresh): new method.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19603 a592a061-630c-0410-9148-cb99ea01b6c8
* Text: new empty() method.
* buffer_funcs.cpp:updateLabels(): return early in case of empty document.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19566 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer_funcs.cpp (updateLabels): new function taking a buffer and
a ParIterator as arguments. This one is used to update labels
into an InsetText. Cleanup the code to reset depth. Call setLabel
for each paragraph, and then updateLabel on each inset it contains.
(setCaptionLabels, setCaptions): removed.
(setLabel): use Counters::current_float to make caption paragraphs
labels.
* insets/Inset.h (updateLabels): new virtual method, empty by
default; this numbers the inset itself (if relevant) and then all
the paragraphs it may contain.
* insets/InsetText.cpp (updateLabels): basically calls
lyx::updateLabels from buffer_func.cpp.
* insets/InsetCaption.cpp (addToToc): use the label constructed by
updateLabels.
(computeFullLabel): removed.
(metrics, plaintext): don't use computeFullLabel.
(updateLabels): new method; set the label from
Counters::current_float.
* insets/InsetWrap.cpp (updateLabels):
* insets/InsetFloat.cpp (updateLabel): new method; sets
Counters::current_float to the float type.
* insets/InsetBranch.cpp (updateLabels): new method; the numbering
is reset afterwards if the branch is inactive. (bug 2671)
* insets/InsetNote.cpp (updateLabels): new method; the numbering
is reset after the underlying InsetText has been numbered.
(bug 2671)
* insets/InsetTabular.cpp (updateLabels): new method (also handles
longtable)
* insets/InsetListings.cpp (updateLabels): new method; mimics what
is done for Floats (although Listings are not floats technically)
* insets/InsetInclude.cpp (getScreenLabel): in the listings case,
use the computed label.
(updateLabels): new method; that either renumbers the child
document or number the current listing.
* LyXFunc.cpp (menuNew): do not updateLabels on empty documents
(why do we do that at all?)
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19482 a592a061-630c-0410-9148-cb99ea01b6c8
The effect is this: If you try to open a file that is already open,
LyX (i) checks if the buffer is dirty, and just switches buffers if
it is not; (ii) if it is, you get this message:
The document %1$s is already loaded and has unsaved changes.
Do you want to abandon your changes and reload the document?
[Reload] [Keep Changes]
If you hit the latter, you just get switched to the document.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19331 a592a061-630c-0410-9148-cb99ea01b6c8
whether we are in appendix mode.
* buffer_funcs.cpp (setLabel): set Counters::appendix as needed.
This fixes bug 3862 automagically.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@19039 a592a061-630c-0410-9148-cb99ea01b6c8
* buffer_funcs.{h,cpp}: new checkAndLoadLyXFile() transferred from BufferView::loadLyXFile().
* BufferView::loadLyXFile(): deleted.
* LyXView::loadLyXFile(): simplify logic and fix some issues:
- buggy child document leads to crash due to error list dialog.
- ensure that we switch to buffer if there's some errors.
- use LyXView::setBuffer() instead of repeating code.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18828 a592a061-630c-0410-9148-cb99ea01b6c8
* checkBufferStructure(): Fix unnumbered toc entries that do not update automatically as you type.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18768 a592a061-630c-0410-9148-cb99ea01b6c8
1) Open EmbeddedObject.lyx
2) Open Toc
3) Click on section 7.2.2 which is in the second child document
4) assertion.
This commit adds proper support for multi-part documents. With this each child document has access to the _full_ TOC tree (including LOT and LOF). This enables to switch between master and child document using the TOC.
* buffer_funcs.cpp:
- updateLabels(): do not emit Buffer::structureChanged() signal for child document
- checkBufferStructure(): update the structure of the master document.
* ControlToc.cpp: always use the TocBackend of the master document.
* LyXView::connectBuffer(): connect structureChanged() of master document.
* TocBackend:
- TocItem: get rid of child_ member.
- TocBackend::item(): only compare items from the same document.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18386 a592a061-630c-0410-9148-cb99ea01b6c8
* InsetMath::name(): deleted.
* buffer_funcs.cpp:setCaptions() fix potential bug by using docstring copy instead of reference while using Inset::name.
git-svn-id: svn://svn.lyx.org/lyx/lyx-devel/trunk@18119 a592a061-630c-0410-9148-cb99ea01b6c8
