boost::regex supports escape sequences starting with a backslash in format
strings of regex_replace, but std::regex does not. Therefore format strings
involving literal backslashes have to be written differently for both flavours.
The special MSVC handling in regex.h is removed, since it is not needed
anymore, and using grep syntax would definitely be wrong.
This is better because it implements a LRU cache. Indeed, while editing in particular, width of many different strings has to be computed. This is different from the previous situation where only width of single characters was computed and cached.
The referenced commit lead to performance issues and possibly
crashes in some cases when saving preferences. Thanks to Guillaume
for discovering the issues. See #9828 for more discussion.
I hope to come up with a better fix for #9507.
This reverts commit 390ae05444.
This is one part of bug 9744: If you toggle between TeX fonts and non-TeX
fonts, the settings of the other choice are no longer thrown away, but stored
and re-activated if you switch back. Most parts of the patch are purely
mechanical (duplicating some BufferParams members), the only non-mechanical
change is in the GUI logic.
The code in InsetTabular disables the toolbar icons and menu entries related to vertical lines.
The code in GuiTabular disables vertical lines in the Settings dialog.
Note that there was a bug in
GuiSetBorders::set(Left|Right|Top|Bottom)Enabled, where the borders
did not get drawn correctly.
Fixes bug #9816
Starting with Qt 5 the modifiers aren't reported correctly for disabled swap.
Until this is fixed it is corrected by reverting the modifier mask to check for.
The horizontal alignment changes caused a regression for documents in older
formats. This could have been fixed by adding the following lines to the
format entry for 489 in development/FORMAT:
Previously, the horizontal position was ignored except for the
following parameter combinations:
- fixed width and type Boxed and without inner box
- fixed width and any type and with inner box and with makebox
Now, it is also used for the parameter combination below:
- makebox is not used and not (type Boxed and without inner box)
and a corresponding conversion to convert_BoxFeatures() in
lib/lyx2lyx/lyx_2_2.py. However, it was decided to revert the box alignment
changes instead: The box alignment can contradict the paragraph alignment. A
better way to avoid the additional space that can be created by paragraph
alignment (which was the motivation for implementing box alignment) is the
same as for table cells (see noTrivlistCentering() in src/Paragraph.cpp).
This would be a file format change and it is too late now for 2.2.0.
See http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg188147.html for the
complete discussion (subject "Regression in lyx2lyx box alignment").
The culprit was that the computation of textwidth did not take wordspacing in account.
Also fictor the code so that the pixmap path can use the special RTL handling.
It is not clear however that the handling of left and right bearing works correctly.
These features are active in DEVEL_VERSION when Debug is set to LATEX.
1. The TexRow information is prepended to the source panel.
2. Clicking on any line in the source triggers reverse search. (This would be an
interesting feature to implement on the user side, but we need a proper LFUN.)
Found by cppcheck: (style) Same expression on both sides of '&&'.
I deduced the correct if-condition from the other places where theLaTeXFonts()
is called.
These were found by cppcheck:
Member variable 'x' is not initialized in the constructor.
The crash #9788 would not have happened if this had been done earlier.
Use the function support:truncateWithEllipsis() to shorten a docstring with
... at the end. Actually we use U+2026 HORIZONTAL ELLIPSIS instead of "..." when
automatically shortening strings. This is to be consistent with Qt's own
truncation and is much nicer on the screen.
This includes the bugs #9575 and #9572 regarding broken text elision in the
outliner.
Known issues (non-regressions):
* TocBackend::updateItem() should be rewritten to update all TOCs. (#8386)
* "..." should be replaced with … everywhere else on the interface (including
translation strings).
* We should prefer to rely on QFontMetrics::elidedText() to truncate strings
with an ellipsis whenever possible, or an equivalent for the buffer view
dependent on the font metrics. See the warning in src/support/lstrings.h.
* TexRow now computes rows from a DocIterator. In practice, the cursor
highlighting is now correct inside insets, it is no longer restricted to the
topmost level. It certainly also makes forward-search more precise.
* Added the option to disable a texrow when not needed, for perf.
* Fixed a bug where the last paragraph was not properly highlighted.
Limitations:
* TexRow still does not handle: math (e.g. multi-cell), sub-captions, inset
arguments.
* New TOC "math-macro". This means that math macros can now be accessed in the
outline pane in their order of appearance or in alphabetical order, and can be
searched using the filter.
* Lists of floats now show subfloats deeper in the navigation menu
* The arbitrary 30 element cut-off after which nothing is shown except "Open
Navigator..." is removed. Menus now have no limit in size, so Qt may display
them scrollable. In exchange, we always show "Open outliner..." at the
beginning. I tested for performance issues with a rather complex document and
it is fine; but this does not exclude corner cases with lots of TOC entries of
a certain kind. If necessary, populating the navigation sub-menu should be
delayed like the main menu.
* Elements that do not contribute to the output (e.g. in a note, a disabled
branch) are now preceded with a symbol indicating this status. (The machinery
was already there; I wonder why it was not implemented already.) I have chosen
U+274E NEGATIVE SQUARED CROSS MARK.
* Fix the contextual menus in the outliner (bug introduced at 94e992c5).
* Toc item now move to the caption when present, but first center on the float,
to prevent the situation where the caption is at the top of the screen and the
contents of the float is off-screen above the caption.
(Internally, the action of the toc items can now be customised)
* Fix the LyXHTML output. Disabled captions no longer appear in the list of
figures.
There are still a few warnings of the kind
(style) Variable 'x' is assigned a value that is never used.
since I did not touch code where I was not sure whether there might be a real
bug, and I kept some for symmetry reasons as well.
This fixes cppcheck warnings (style) 'class x' does not have a copy constructor
which is recommended since the class contains a pointer to allocated memory.
These were all flagged by "(style) The scope of the variable 'x' can be reduced."
Narowing the scope improves readability, and if it is in a loop then the
compiler will be clever enough to produce efficient code, we do not need
manual optimization for POD types.
This generalises the new use of TocBuilder (97e8101) to listings and wraps and
removes some duplicate code.
Make sure that we will never write an empty float type again in the future
(#9760)
We introduce TocBuilder for building TOCs that take into account both float
insets and their captions.
* Floats without caption are shown with their content.
* Floats with a caption are shown with their caption, but clicking the entry now
correctly moves to the float and not to the caption.
* Subsequent captions produce additional entries in the TOC.
* Figures and subfigures are correctly ordered in the outliner.
* New TOC "senseless" for captions appearing alone (a bit like broken references
are still displayed in the menu and outliner).
* Disable LFUN_CAPTION_INSERT if there is already a caption in a listing
Known issues:
* Inconsistent output for includes located inside floats
* We should record the end of the float in addition of the beginning for a more
accurate cursor -> outliner entry conversion
These were all found by cppcheck. Even in constructors that are there "only
because of std containers" the class should be initialized correctly. You can
never know whether such an object does not get used, and then a nice crash
caused by dereferencing a NULL-pointer is better than undefined behaviour.
Fix bugs #6501 and #7359.
* Selection highlighting has been broken since a conflict with
reverse-search was repaired (at 00a62b7c), is now fixed.
* The selection highlighting was not accurate, for LaTeX formats (in
full source view), and meaningless, for non LaTeX formats.
* fix regression at cc00b9aa: force_getcontent_ was always true
therefore the code to detect changes in the generated source was
dead. The consequence is that the source view would jump to the
beginning at each updateView() even if no change occurred. Cc00b9aa
was meant to fix#5600, which I cannot reproduce with the new
implementation.
* Various improvements:
* When the position-to-line conversion is unavailable (LyXHTML, LyX
source, etc.) we focus on the first difference instead.
* Get some space around the cursor
* Respect the scrollbars
* Highlight with QTextEdit::ExtraSelections instead of cursor
selection (the latter used to break syntax highlighting of the
TeX code... which was not so much of an issue before because the
wrong part was selected)
Known issues:
* The highlighting is off by one line in very last paragraph of a
document. This appears to be a bug in TexRow.cpp.
* The highlighting is off for any kind of inset. This could be
solved by adapting TexRow so that it accepts CursorSlices as
and argument for the conversion to line number. (this is bug
#4725)
Fix bug #9493. The source panel was very slow with auto-update on. Now
we use a timer that ensures that the source is generated only at
rest. The delay is short or long depending on whether we show the
source of a paragraph or the whole source.
